Introduction
This manual provides essential instructions for the proper identification, installation, and maintenance of your Mb Motorsports C-039-2 Chrome Wheel Center Cap. Please read this manual thoroughly before proceeding with installation to ensure correct fitment and longevity of the product.
Product Identification
It is critical to verify the part numbers on the back of your existing wheel center cap to ensure compatibility with the Mb Motorsports C-039-2. This center cap is designed to fit wheels that specifically require part numbers such as C-039, 85195, or C-039-2.
Examine the back of your current center cap for embossed or printed numbers. If these numbers match, the C-039-2 center cap is likely compatible.
Image: Rear view of the center cap, highlighting the embossed part number "C-039" and material "ABS". This view is crucial for verifying compatibility with existing wheel specifications.
Image: Front view of the Mb Motorsports C-039-2 Chrome Wheel Center Cap, featuring the brand logo. This is the visible side of the cap once installed.
Installation
- Preparation: Ensure the wheel hub area where the center cap will be installed is clean and free of dirt, debris, or old adhesive residue. A clean surface facilitates proper seating.
- Alignment: Carefully align the new center cap with the opening in the wheel. Note any specific notches or tabs on the cap or wheel that need to be matched.
- Snap-On Installation: This center cap features a snap-on design. Apply even, firm pressure around the perimeter of the cap until it securely snaps into place. Avoid using excessive force or tools that could damage the cap or wheel.
- Verification: After installation, gently tug on the center cap to ensure it is firmly seated and does not wobble.
Maintenance
- Cleaning: To maintain the chrome finish, clean the center cap regularly with mild automotive soap and water. Use a soft cloth or sponge to avoid scratching the surface.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the chrome plating and underlying material.
- Drying: After washing, dry the center cap immediately with a clean, soft towel to prevent water spots.
Troubleshooting
- Cap Does Not Fit:
Solution: Re-verify the part numbers on the back of your original center cap against the required part numbers (C-039, 85195, C-039-2). Ensure the wheel opening dimensions match the center cap. This product is designed for specific fitment.
- Cap Feels Loose After Installation:
Solution: Ensure the cap is fully seated and all clips or tabs have engaged properly. Apply firm, even pressure around the entire perimeter until it snaps securely. Check for any obstructions in the wheel hub opening.
Specifications
| Feature | Detail |
|---|---|
| Brand | Mb Motorsports |
| Model Number | C-039-2 (Compatible with C-039, 85195) |
| Manufacturer Part Number | C-039 Chrome |
| UPC | 791512693162 |
| Item Weight | 3.2 ounces |
| Package Dimensions | 4 x 4 x 1 inches |
| Color | Silver (Chrome Finish) |
| Installation Type | Snap-On |
Warranty Information
Specific warranty details for the Mb Motorsports C-039-2 Chrome Wheel Center Cap are typically provided by the retailer at the time of purchase or by the manufacturer. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, refer to the documentation included with your purchase or contact Mb Motorsports directly.
Customer Support
For further assistance, questions, or support regarding your Mb Motorsports C-039-2 Chrome Wheel Center Cap, please contact the retailer from whom you purchased the product. You may also visit the official Mb Motorsports website for additional product information or contact details.