Cedarslink 1.5 Meter Square Aluminum DJ Lighting Truss Totem
Cedarslink 1.5 Meter Square Aluminum DJ Lighting Truss Totem Instruction Manual
Model: 1.5 Meter Square Aluminum DJ Lighting Truss Totem
Introduction
This manual provides detailed instructions for the safe and effective assembly, operation, and maintenance of your Cedarslink 1.5 Meter Square Aluminum DJ Lighting Truss Totem. Please read this manual thoroughly before use and retain it for future reference.
General Safety Instructions
Always ensure all connections are secure before use.
Do not exceed the maximum load capacity of the truss system.
Inspect the truss for any damage before each use. Do not use if damaged.
Ensure the totem is placed on a stable, level surface.
Keep children and unauthorized personnel away from the truss system during assembly and operation.
Consult a qualified professional for complex installations or if you have any doubts regarding safe usage.
Package Contents
Verify that all components listed below are present and undamaged upon opening the package:
One (1) 20"x20" metal base with half coupler connections.
One (1) 1.5 meter (4.92 ft.) square aluminum 290mm x 290mm (12"x12") truss section with 2" tube diameter.
One (1) 12"x12" aluminum top plate with half couplers.
Image: All components of the Cedarslink 1.5 Meter Square Aluminum DJ Lighting Truss Totem, including the base plate, truss section, and top plate.
Setup and Assembly
Follow these steps to assemble your Cedarslink Truss Totem:
Prepare the Base: Place the 20"x20" metal base on a stable, level surface where the totem will be used. Ensure there is adequate space around the base for stability.
Attach the Truss Section: Align the bottom end of the 1.5 meter square aluminum truss section with the half coupler connections on the metal base. Securely fasten the truss section to the base using the provided hardware (pins and clips). Ensure all connections are tight and the truss is firmly seated.
Install the Top Plate: Align the 12"x12" aluminum top plate with the half coupler connections at the top of the truss section. Securely fasten the top plate using the provided hardware (pins and clips). Verify that the top plate is stable and level.
Final Check: Before mounting any equipment, gently shake the assembled totem to ensure all connections are secure and the structure is stable.
Operation
The Cedarslink Truss Totem is designed to support various lighting fixtures and equipment, such as moving head lights or monitors.
Mounting Equipment: Use appropriate clamps and safety cables (not included) to securely attach your lighting fixtures or monitors to the 12"x12" aluminum top plate. Ensure the weight is evenly distributed and does not exceed the totem's maximum load capacity.
Cable Management: Route power and signal cables neatly along the truss structure using cable ties to prevent tripping hazards and maintain a professional appearance.
Stability: Always ensure the totem remains stable, especially when adjusting equipment or in environments with potential vibrations. Consider using sandbags on the base for added stability if necessary (not included).
Maintenance
Regular maintenance ensures the longevity and safe operation of your truss totem.
Cleaning: Wipe down aluminum surfaces with a soft, damp cloth. Avoid abrasive cleaners that could damage the finish.
Inspection: Periodically inspect all welds, connections, pins, and clips for signs of wear, damage, or corrosion. Replace any damaged components immediately.
Storage: When not in use, disassemble the totem and store components in a dry, clean environment to prevent corrosion and damage.
Troubleshooting
Problem
Possible Cause
Solution
Totem feels unstable after assembly.
Loose connections; uneven surface; overloaded.
Ensure all pins and clips are fully engaged. Move to a level surface. Reduce load if exceeding capacity. Consider adding sandbags to the base.
Difficulty connecting truss sections.
Misalignment; bent pins; debris in couplers.
Check alignment carefully. Inspect pins for damage and straighten if possible, or replace. Clean couplers of any obstructions.
Visible damage (bends, cracks) on truss.
Impact during transport or use; material fatigue.
Do not use the damaged component. Contact Cedarslink support for replacement parts.
Specifications
Brand
Cedarslink
Model
1.5 Meter Square Aluminum DJ Lighting Truss Totem
Truss Section Length
1.5 Meter (4.92 ft.)
Truss Section Dimensions
290mm x 290mm (12"x12") Square
Main Tube Diameter
2 inches
Base Plate Dimensions
20"x20"
Top Plate Dimensions
12"x12"
Material
Aluminum, Metal
Color
Silver
Shape
Square
Finish Type
Aluminum, Metal
Mounting Type
Floor Mount
UPC
049008667013
ASIN
B07D51GTM5
Warranty and Support
For specific warranty information regarding your Cedarslink 1.5 Meter Square Aluminum DJ Lighting Truss Totem, please refer to the documentation included with your purchase or visit the official Cedarslink website.
If you require technical assistance, have questions about assembly, or need to report a missing or damaged part, please contact Cedarslink customer support through their official channels. You can often find support contact information on the product packaging or the brand's online store page.
