Kiven 150W LED High Bay Light UFO Commercial Lighting User Manual

Introduction

The Kiven LED high bay light is designed for commercial and industrial applications such as factories, warehouses, and workshops. This luminaire offers high luminous efficiency, providing significant energy savings compared to older lighting systems. Featuring a Sosen UL certified driver, LM80 LED, and a cold forging aluminum heat sink, this UFO LED high bay light is built for durability and a long operational lifespan.

Image: Kiven 150W LED High Bay Light, showcasing its UFO design and hanging chain.

Important Safety Instructions

Please read and understand all instructions before installation and use. Retain this manual for future reference.

• Ensure the power supply is disconnected before installation, maintenance, or cleaning.
• Installation should be performed by a qualified electrician in accordance with local electrical codes.
• Do not operate the light with damaged wiring or components.
• Avoid direct eye exposure to the light source when illuminated.
• This product is rated IP65 waterproof, suitable for outdoor and indoor use, but should not be submerged in water.
• Ensure the mounting structure can support the weight of the fixture.

Package Contents

Verify that all components are present and undamaged upon opening the package:

• 1 × UFO High Bay Light
• 1 × Eye Hook Mount
• 1 × Power Cable (5 ft UL listed plug-in cord)
• 1 × Hanging Chain (3.3 ft)
• 1 × User Manual

Setup and Installation

The Kiven 150W LED High Bay Light is designed for straightforward chain mount installation. The included US hook, US plug, and 5-foot cable facilitate quick setup.

1. Prepare Mounting Location: Identify a suitable ceiling or overhead structure capable of securely supporting the light fixture.
2. Attach Eye Hook: Securely fasten the provided eye hook mount to the chosen mounting point.
3. Connect Chain: Attach one end of the hanging chain to the eye hook mount and the other end to the fixture's integrated hanging point.
4. Secure Safety Wires (Optional but Recommended): If additional safety wires are available (not included), attach them between the fixture and the mounting structure for extra security.
5. Plug In: Once the fixture is securely suspended, plug the 5-foot UL listed power cord into a compatible 100-240VAC power outlet.

Image: Diagram illustrating the chain mount installation process, showing the chain, fixture, and plug connection.

Image: Product view highlighting key dimensions (9.8" height, 19.9" width) and the 5 ft UL listed plug-in cord.

Operating Instructions

Operating the Kiven 150W LED High Bay Light is simple:

• Ensure the light is properly installed and securely plugged into a power source.
• Turn on the power supply to illuminate the light.
• Turn off the power supply to switch off the light.
• If connected to a wall switch or timer, operate the light using that control.

Maintenance

Regular maintenance ensures optimal performance and longevity of your LED high bay light:

• Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the fixture. For stubborn dirt, a slightly damp cloth can be used, followed by drying. Do not use abrasive cleaners or solvents.
• Inspection: Periodically inspect the hanging chain, power cable, and connections for any signs of wear, damage, or corrosion. Address any issues promptly.
• LEDs: The LED light source is designed for long-term use and typically does not require replacement.

Troubleshooting

If you encounter issues with your Kiven LED High Bay Light, refer to the following common solutions:

• Light Does Not Turn On:
  • Check if the power cord is securely plugged into a working outlet.
  • Verify that the power supply (e.g., wall switch, circuit breaker) is turned on.
  • Inspect the power cord for any visible damage.
• Light Flickers:
  • Ensure all electrical connections are secure.
  • Confirm the voltage supply is within the specified operating range (100-240VAC).
• Reduced Brightness:
  • Clean the light fixture to remove any dust or debris that may be obstructing light output.

If these steps do not resolve the issue, please contact customer support.

Specifications

Image: Detailed view of the LED chips and the reflective surface within the high bay light fixture.

Warranty Information

This Kiven product is covered by a standard manufacturer's warranty. For specific details regarding warranty duration, coverage, and claims process, please refer to the documentation included with your purchase or contact Kiven customer support directly.

Customer Support

For any questions, technical assistance, or support needs, please visit the official Kiven Store or contact their customer service department.

Kiven Store: Visit the Kiven Store on Amazon