1. Introduction
Welcome to the Tommee Tippee Closer To Nature Newborn Kit. This kit is designed to provide a natural feeding experience for your baby, making the transition between breast and bottle smooth. The Closer to Nature bottles feature a breast-like teat for easy latch-on and an anti-colic valve to reduce air ingestion, promoting comfortable feeding.
This manual provides essential information on how to set up, operate, maintain, and troubleshoot your Tommee Tippee Closer To Nature Newborn Kit. Please read these instructions carefully before first use and retain them for future reference.
Figure 1: Overview of the Tommee Tippee Closer To Nature Newborn Kit, showing various bottle sizes, teats, and a bottle brush.
2. Kit Contents
The Tommee Tippee Closer To Nature Newborn Kit typically includes:
- 2 x 250ml (9 fl oz) Closer To Nature Bottles
- 1 x 150ml (5 fl oz) Closer To Nature Bottle
- Closer To Nature Slow Flow Teats (pre-installed or as spares)
- Bottle and Teat Cleaning Brush
- Soother (pacifier)
Note: Actual contents may vary slightly based on specific kit packaging.
3. Setup and Assembly
3.1 Initial Cleaning
Before first use, disassemble all parts and wash them thoroughly in warm soapy water. Rinse all components in clean water and sterilize according to the instructions in the Maintenance section.
3.2 Assembling the Bottle
- Hold the teat and gently pull it through the screw ring until it clicks into place. Ensure the teat is securely fitted.
- Screw the assembled teat and screw ring onto the bottle. Do not overtighten.
- Ensure the anti-colic valve (located on the teat) is clear and not blocked.
Figure 2: Detail of the teat with its integrated anti-colic valve.
4. Operating Instructions
4.1 Preparing Formula or Milk
- Always follow formula manufacturer's instructions for preparation.
- Ensure hands and surfaces are clean.
- Measure the required amount of water using the bottle's clear markings.
Figure 3: Bottle with clear measurement indicators for accurate feeding preparation.
4.2 Feeding Your Baby
- Always check the milk temperature before feeding by sprinkling a few drops on the inside of your wrist. It should feel lukewarm.
- Hold your baby in a comfortable, semi-upright position.
- Ensure the teat is full of milk to prevent your baby from swallowing air.
- Allow your baby to feed at their own pace.
Figure 4: A baby feeding comfortably from a Tommee Tippee bottle.
5. Maintenance
5.1 Cleaning
For hygiene and safety, always wash the product immediately after use.
- Hand Washing: Disassemble all parts. Wash in warm soapy water using the provided bottle and teat brush. Rinse thoroughly.
- Dishwasher: All components are dishwasher safe (top rack only). Avoid placing items near strong-colored foods which could stain.
5.2 Sterilization
Sterilize all components after cleaning and before each use until your baby is at least 12 months old.
- Boiling: Place all disassembled parts in boiling water for 5 minutes. Ensure there is enough water to cover all items and prevent damage.
- Steam Sterilization: Use an electric steam sterilizer or microwave sterilizer according to the manufacturer's instructions.
- Cold Water Sterilization: Use a cold water sterilization solution according to the manufacturer's instructions.
5.3 Storage and Replacement
- Store all components in a dry, covered container away from direct sunlight or heat.
- Inspect teats before each use. Replace teats at the first signs of damage or weakness, such as tears, stickiness, or enlargement.
- For safety and hygiene, it is recommended to replace teats every 2-3 months.
6. Troubleshooting
- Problem: Bottle leaks during feeding.
Solution: Ensure the screw ring is tightened correctly, but not overtightened. Check that the teat is pulled through the screw ring securely and that the anti-colic valve is not blocked or damaged.
- Problem: Baby is struggling to feed or milk flow is too slow.
Solution: Check the teat for blockages. Ensure the anti-colic valve is clear. Consider if a faster flow teat is needed for your baby's age and feeding stage (Tommee Tippee offers various flow rates).
- Problem: Baby shows signs of colic or excessive gas.
Solution: The Closer To Nature bottles are designed with an anti-colic valve. Ensure this valve is clean and functioning correctly. Make sure the teat is always full of milk during feeding to minimize air intake. Burp your baby frequently during and after feeding.
- Problem: Bottle or teat discolors.
Solution: This can occur if components are washed with strong-colored foods. While generally harmless, ensure thorough rinsing. If discoloration persists or affects functionality, consider replacement.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 42245055 |
| Brand | Tommee Tippee |
| Bottle Type | Anti-Colic Bottle |
| Bottle Material | Glass (as per main product image) |
| Teat Material | Silicone |
| Teat Type | Vented, Breast-like shape |
| Capacity | 150ml (5 fl oz) and 250ml (9 fl oz) bottles included in kit |
| Product Dimensions | 3.35 x 12.28 x 6.77 inches (Kit packaging) |
| Item Weight | 1.54 pounds (0.7 Kilograms) |
| Dishwasher Safe | Yes (Top rack) |
8. Warranty Information
Tommee Tippee products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Tommee Tippee website. Keep your proof of purchase for any warranty claims.
9. Customer Support
If you have any questions, concerns, or require assistance with your Tommee Tippee Closer To Nature Newborn Kit, please contact Tommee Tippee customer support. Contact information can typically be found on the product packaging or on the official Tommee Tippee website: www.tommeetippee.com.
