Benjara Poplar Wood Leatherette Dining Chair (Set Of 2), Black

Introduction

This manual provides instructions for the assembly, use, and maintenance of your Benjara Poplar Wood Leatherette Dining Chairs. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product.

Safety Information

• Ensure all parts are present and undamaged before assembly.
• Do not overtighten screws during assembly to avoid damaging the wood.
• Do not stand on the chair.
• Do not exceed the recommended weight capacity (refer to manufacturer specifications if available).
• Keep away from open flames and excessive heat sources.
• Regularly check and tighten all fasteners to maintain stability and prevent accidents.

Package Contents

Your package should contain the following items:

• 2 x Benjara Poplar Wood Leatherette Dining Chairs (BM171539)
• Assembly Hardware (screws, washers, Allen wrench)

Setup and Assembly

Follow these steps to assemble your dining chairs. It is recommended to assemble the chairs on a soft, clean surface to prevent scratching.

1. Unpack all components and verify against the package contents list.
2. Attach the front legs to the seat frame using the provided screws and washers. Do not fully tighten yet.
3. Attach the back legs to the seat frame, ensuring proper alignment. Do not fully tighten yet.
4. Once all legs are attached, place the chair upright on a level surface. Apply gentle pressure to the seat to ensure all legs are evenly touching the floor.
5. Systematically tighten all screws until secure. Do not overtighten.
6. Repeat the process for the second chair.

Image: Assembled Benjara Poplar Wood Leatherette Dining Chairs in a dining room setting.

Image: Benjara Dining Chair Dimensions, indicating 26"D x 22"W x 41"H.

Operating Instructions

These chairs are designed for indoor dining and general seating purposes. Ensure the chair is placed on a stable, level surface before use. Sit centrally on the seat for optimal balance and comfort. Avoid standing on the chair or using it as a step stool.

Maintenance and Care

Cleaning the Leatherette Upholstery:

• For daily cleaning, wipe with a soft, damp cloth.
• For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain or damage the material.
• For stubborn stains, use a mild soap solution (e.g., diluted dish soap) on a soft cloth, then wipe with a clean, damp cloth and dry thoroughly.
• Avoid harsh chemicals, abrasive cleaners, or solvents, as these can damage the faux leather.
• Keep away from direct sunlight and heat sources to prevent fading and cracking.

Cleaning the Wood Frame:

• Dust regularly with a soft, dry cloth.
• For deeper cleaning, wipe with a slightly damp cloth and immediately dry with a clean, soft cloth.
• Avoid excessive moisture.
• Do not use silicone-based polishes or waxes, as they can build up over time and attract dust.

Troubleshooting

Chair Wobbles After Assembly:

• Loosen all screws slightly.
• Place the chair on a flat, level surface and apply even pressure to the seat.
• While maintaining pressure, systematically tighten all screws. This helps the chair settle into an even position.

Screws Become Loose Over Time:

• This is normal for furniture. Periodically check all fasteners (every 3-6 months) and tighten them as needed to ensure stability and safety.

Minor Scratches on Wood Frame:

• Minor scratches can sometimes be concealed with a wood repair marker or furniture polish matching the wood finish.

Specifications

Warranty and Support

For information regarding product warranty, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please contact the retailer where the product was purchased.