Introduction
The Medical Breakthrough Vending 5 Massage Chair is engineered to provide a comprehensive and therapeutic massage experience. Designed by a team of doctors and specialists, this chair integrates advanced technology with user-friendly features to promote relaxation and pain relief. Its robust construction ensures durability for commercial use, while its automated functions offer convenience for both operators and users.

Figure 1: Front view of the Medical Breakthrough Vending 5 Massage Chair.
Setup
Follow these steps to properly set up your Medical Breakthrough Vending 5 Massage Chair. It is recommended to have at least two people for safe handling and assembly.
Unboxing and Placement
- Cut Packing Tapes: Carefully cut all packing tapes and straps securing the outer cardboard box.
- Remove Outer Box: Fasten the dismantling port or the lower end of the outer box and lift it upwards to remove the entire outer packaging.
- Remove Internal Packaging: Remove all protective boards and foam inserts surrounding the chair. Be sure to remove the plastic bags covering the calf and main body sections.
- Position the Chair: With assistance, carefully lift the massage chair to its planned position. Pay attention to the front armrests and the groove of the back cover to ensure a stable lift. The chair features wheels on the bottom for easier movement once upright.
Video 1: Manufacturer's installation guide for the Medical Breakthrough Massage Chair. This video demonstrates the unboxing and initial setup steps.
Connecting Components
- Power Connection: Locate the power input port at the rear base of the chair. Plug in the provided power cord and turn on the main power switch. The chair will automatically begin its reset sequence.
- Hand Controller: Open the accessory bag and take out the hand controller bracket, power cord, and instruction manual. Install the hand controller bracket into the designated slot on the armrest. Carefully remove the protective cover from the hand controller and place it onto the bracket.
- Calf Section: Remove the left and right screws of the calf fixing cover. Insert the plug-in air tube into its corresponding port. Hang the calf section onto the calf holder and secure it by reinstalling the left and right screws.
- Leg Attachment Cloth: Install the leg attachment cloth over the calf section.
Operating Instructions
The Vending 5 Massage Chair offers multiple ways to control your massage experience, ensuring personalized comfort and therapy.
Control Methods
- Integrated Touchscreen: The primary control interface is a user-friendly touchscreen display located on the armrest. This allows for selection of massage programs, intensity adjustments, and other settings.
- Voice Control: The chair features intelligent voice control for hands-free operation. Simply use pre-defined voice commands to start, stop, or change massage settings.
- Quick Buttons: Convenient quick access buttons are located on the armrest for immediate control over essential functions like recline and power.
- Mobile App: A dedicated mobile application is available for remote control of the chair via Bluetooth, offering comprehensive control from your smartphone or tablet.
Massage Functions
- Zero Gravity Recline: Upon activation, the chair reclines to a zero-gravity position, distributing your body weight evenly to minimize pressure on the spine and enhance relaxation.
- Medical Body Scan: The chair performs an automatic body scan to map your unique body contours and pinpoint key pressure points. This ensures the massage rollers are precisely positioned for an optimized and personalized massage.
- Diverse Massage Programs: Choose from over 15 pre-programmed auto massage routines designed for various needs, including comfort, relaxation, stretch, back & waist, neck & shoulder, full body, spine protection, fatigue recovery, and more.
- Customizable Massage: In manual mode, you can select specific massage areas, adjust roller width, speed, and intensity (rolling, kneading, tapping, shiatsu).
- Heat Therapy: Integrated heating elements provide soothing warmth to the back and calves, promoting circulation and muscle relaxation.
- Foot and Calf Massage: The footrest features rollers for comprehensive foot massage and airbags for compression massage on the calves, aiding in circulation and relieving leg fatigue. The leg extenders accommodate users of various heights.

Figure 2: The Vending 5 Massage Chair in a reclined position, demonstrating its ergonomic design.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your massage chair.
- Cleaning: Regularly wipe down the chair's surfaces with a soft, damp cloth. For deeper cleaning, use a mild, non-abrasive cleaner. Avoid harsh chemicals that may damage the material.
- Inspection: Periodically inspect all cables, connections, and moving parts for any signs of wear or damage. Ensure all screws and fasteners are secure.
- Storage: If storing the chair for an extended period, ensure it is clean, dry, and covered to protect it from dust and moisture.
Troubleshooting
If you encounter any issues with your massage chair, refer to the following common troubleshooting tips:
- Chair Not Powering On:
- Check if the power cord is securely plugged into both the chair and a working electrical outlet.
- Ensure the main power switch at the rear base of the chair is in the "ON" position.
- Massage Rollers Not Functioning Correctly:
- Re-run the Medical Body Scan to allow the chair to re-map your body and adjust roller positions.
- Check the selected massage program or manual settings for intensity and area.
- Chair Not Reclining/Adjusting:
- Ensure there are no obstructions behind or around the chair preventing movement.
- Verify that the chair is not exceeding its maximum weight recommendation of 300 pounds.
- Unusual Noises:
- Minor operational noises are normal. If loud or persistent noises occur, ensure all components are securely fastened.
For issues not covered here, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Medical Breakthrough |
| Model Name/Number | Vending 5 |
| Color | Black |
| Material | Metal, Foam |
| Dimensions (W x L x H) | 34 inches x 42 inches x 60 inches |
| Maximum Weight Recommendation | 300 Pounds |
| Recommended Uses | Pain Relief |
| Back Style | Cushion back |
| Reclining Positions | 2 |
| Tilting | Yes |
| Assembly Required | No (minimal setup required) |
| UPC | 856813007169 |
Warranty and Support
For specific warranty details and terms, please refer to the documentation provided with your purchase or contact Medical Breakthrough directly. General customer support is available for product inquiries and assistance.
Manufacturer: Medical Breakthrough
Customer Support: Please visit the Medical Breakthrough Store on Amazon or refer to your product packaging for contact information.




