Product Overview
The Velvac Indicator Light (Model 090215) is a green LED light designed for various automotive and electrical applications. It features a durable chrome housing and a nylon base, engineered for long-lasting performance.
Image of the Velvac Green LED Indicator Light, showing its chrome housing and attached 20 AWG lead wires.
This indicator light is suitable for use in systems requiring a clear visual signal, operating efficiently at 12 VDC. Its robust design ensures reliability in various environmental conditions.
Installation Instructions
Follow these steps for proper installation of the Velvac Indicator Light:
- Prepare Mounting Hole: A 7/16" (approximately 11.1 mm) diameter mounting hole is recommended for secure installation. Ensure the surface is clean and free of debris.
- Insert Light: Carefully insert the indicator light into the prepared mounting hole. The chrome housing should sit flush against the mounting surface.
- Wire Connections: The light comes with 20 AWG lead wires. Connect these wires to your 12 VDC power source.
- Identify the positive and negative leads. Typically, one wire is for positive (+) and the other for negative (-) or ground. Refer to your vehicle's or system's wiring diagram for correct polarity.
- Ensure all connections are secure and insulated to prevent short circuits.
- Test Functionality: After wiring, apply power to the circuit to verify that the green LED illuminates correctly.
Note: The LEDs are rated for 15 mA at 12 VDC. Exceeding this voltage or current may damage the light.
Operation
The Velvac Indicator Light is designed for straightforward operation:
- Once properly installed and connected to a 12 VDC power source, the green LED will illuminate when power is supplied to its leads.
- This light serves as a visual indicator for various functions, such as power status, system activation, or warning signals, depending on its integration into your electrical system.
- The estimated bulb life expectancy is 100,000 hours, providing long-term, reliable indication.
- The light is designed to operate effectively within a temperature range up to +185° F (85° C).
Maintenance
The Velvac Indicator Light requires minimal maintenance due to its durable LED design:
- Cleaning: Periodically wipe the chrome housing with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners that could scratch the finish.
- Inspection: Regularly inspect the wiring connections for any signs of wear, corrosion, or looseness. Ensure the light remains securely mounted.
- LED Longevity: LEDs are known for their long lifespan. No bulb replacement is necessary under normal operating conditions.
Troubleshooting
If your Velvac Indicator Light is not functioning as expected, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not illuminate. | No power supply, incorrect wiring, blown fuse in circuit. | Check power source, verify wiring polarity (positive/negative), inspect circuit fuse. |
| Light flickers or is dim. | Loose connection, insufficient voltage, faulty wiring. | Secure all connections, ensure stable 12 VDC supply, inspect wires for damage. |
| Light housing is loose. | Improper mounting, vibration. | Ensure mounting hole is correct size (7/16") and light is fully seated. |
If issues persist after attempting these solutions, consult a qualified technician or contact Velvac customer support.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | 090215 |
| Light Source Type | Light Emitting Diode (LED) |
| Light Color | Green |
| Operating Voltage | 12 VDC |
| Current Draw | 15 mA (at 12 VDC) |
| Housing Material | Chrome |
| Base Material | Nylon |
| Wire Gauge | 20 AWG |
| Recommended Mounting Hole Diameter | 7/16" |
| Estimated Bulb Life | 100,000 hours |
| Operating Temperature | Up to +185° F (85° C) |
| Item Weight | 0.32 ounces |
| Package Dimensions | 5 x 3 x 1 inches |
| UPC | 728974107166 |
| Country of Origin | Indonesia |
Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the official Velvac website or contact their customer service directly. Specific warranty terms may vary.
Velvac Contact Information:
- Website: www.velvac.com (Please note: This is a placeholder link as specific support links were not provided.)
- Customer Service: Refer to the website for contact numbers or email addresses.