Introduction
Thank you for choosing the DAKASON 30W LED Wall Pack. This product is designed to provide efficient and reliable outdoor lighting with features such as a dusk-to-dawn photocell and an adjustable head. This manual provides essential information for safe installation, operation, and maintenance of your LED wall pack. Please read it thoroughly before installation and keep it for future reference.
Image: DAKASON 30W LED Wall Pack with adjustable head installed on a building exterior, illuminating the area below.
Safety Information
Please observe the following safety precautions during installation and operation:
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances.
- Ensure the supply voltage is compatible with the fixture's requirements (100-277V AC).
- Do not handle the fixture with wet hands or when standing on wet or damp surfaces.
- This fixture is designed for outdoor use and is IP65 rated for wet locations.
- Do not attempt to modify or disassemble the fixture beyond what is described in this manual.
Package Contents
Verify that all components are present before beginning installation:
- DAKASON 30W LED Wall Pack Fixture (x2 for 2-pack)
- Photocell (pre-installed)
- Non-photocell cover (for disabling photocell function)
- Mounting hardware (screws, wire nuts)
- Instruction Manual
Product Features
- Energy Efficient: Consumes 30 watts, replacing 100-150 watt metal halide lights, saving up to 80% energy.
- Built-in Photocell: Automatically turns the light on at dusk and off at dawn. Can be converted to non-photocell operation.
- Adjustable Head: Fixture angle can be adjusted 0-90 degrees for precise light direction.
- Durable Construction: Made of die-cast aluminum housing and tempered glass lens, IP65-rated waterproof and vibration resistant.
- Long Lifespan: Maintenance-free LEDs with 50,000 hours of life.
Setup & Installation
Follow these steps for proper installation of your DAKASON LED Wall Pack. Ensure power is disconnected before starting.
1. Mounting the Fixture
- Choose a suitable mounting location on a wall or vertical surface, ensuring it can support the fixture's weight.
- Securely attach the mounting plate to the junction box or wall using appropriate screws and anchors (not included, if required for your surface).
- Ensure the mounting plate is oriented correctly, typically with 'UP' arrow pointing upwards, to allow proper hinge function.
Image: Diagram illustrating the junction box mounting process, showing the fixture opened to reveal wiring and the separate mounting plate.
2. Wiring Connections
- Connect the fixture's black wire to the supply's live/hot wire.
- Connect the fixture's white wire to the supply's neutral wire.
- Connect the fixture's green/ground wire to the supply's ground wire.
- Use appropriate wire nuts to secure all connections. Ensure connections are tight and insulated.
- Carefully tuck all wires into the junction box.
3. Securing the Fixture
- Attach the fixture body to the mounted plate, ensuring it is securely hinged.
- Close the fixture and tighten any securing screws to ensure a watertight seal.
Image: DAKASON LED Wall Pack installed on a building during heavy rain, demonstrating its IP65 waterproof rating for wet locations.
4. Photocell Configuration (Optional)
The fixture comes with a pre-installed photocell for dusk-to-dawn operation. If you prefer to control the light with a wall switch, you can replace the photocell with the included non-photocell cover.
- To disable the photocell, carefully disassemble the housing of the lamp to access the photocell.
- Pull out the existing photocell.
- Screw in the non-photocell cover into the opening.
- Reassemble the lamp housing.
Image: Diagram illustrating the steps to convert the LED wall pack from photocell to non-photocell operation by replacing the sensor with a cover.
Operating Instructions
Photocell Operation
If the photocell is installed, the fixture will automatically turn on when ambient light levels drop (dusk) and turn off when light levels rise (dawn). Ensure the photocell is not obstructed by objects or other light sources, which could interfere with its operation.
Image: Close-up of the photocell sensor on the DAKASON LED Wall Pack, illustrating its function to automatically turn on at dusk and off at dawn.
Adjusting the Light Head
The fixture's head can be adjusted to direct light as needed. Loosen the adjustment screw on the side of the fixture, pivot the light head to the desired angle (0-90 degrees), and then securely tighten the screw to lock it in place.
Image: Diagram illustrating the 0-90 degree adjustable head feature of the LED wall pack, showing the range of motion.
Maintenance
The DAKASON LED Wall Pack is designed for minimal maintenance. However, periodic cleaning can help maintain optimal performance.
- Cleaning: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or lens.
- Inspection: Periodically check the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- The LEDs are integrated and not user-replaceable.
Troubleshooting
If you encounter issues with your LED Wall Pack, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Faulty wiring Photocell malfunction (if installed) | Check circuit breaker and power connections. Verify wiring connections are secure. Ensure photocell is not obstructed or try replacing it with the non-photocell cover to test. |
| Light stays on during the day | Photocell obstructed or receiving insufficient light Photocell malfunction | Clear any obstructions from the photocell. Ensure it is exposed to natural daylight. Test with the non-photocell cover. |
| Light flickers | Loose wiring connection Voltage fluctuations | Check and secure all wiring connections. Consult a qualified electrician to check power supply stability. |
Specifications
Image: Dimensions diagram for the DAKASON 30W LED Wall Pack, showing length, width, and height measurements.
| Attribute | Value |
|---|---|
| Brand | DAKASON |
| Model Number | WP-30D-50 |
| Wattage | 30 Watts |
| Brightness | 3300 Lumens |
| Color Temperature | 5000 Kelvin (Cool White) |
| Voltage | 100-277 Volts (AC) |
| Material | Die-cast Aluminum, Tempered Glass |
| Dimensions (L x W x H) | 6.6" x 7.9" x 4.3" |
| Item Weight | 4 Pounds |
| IP Rating | IP65 (Waterproof) |
| Special Features | Dusk-to-Dawn Photocell, Adjustable Head, Full Cut-Off, Instant On, Not Dimmable, Shatter Resistant |
| Certifications | ETL Listed |
| UPC | 766832159971 |
Warranty Information
This DAKASON LED Wall Pack comes with a 5-year warranty. The warranty is provided by the seller. Please retain your proof of purchase for any warranty claims.
Customer Support
For any questions, concerns, or issues regarding your DAKASON LED Wall Pack, please contact us through the Amazon Buyer-Seller Messaging Service. Our support team is available to assist you.