BANDAI Complete Selection Modification CSM O Medal Holder Instruction Manual

1. Introduction and Overview

The BANDAI Complete Selection Modification (CSM) O Medal Holder is a meticulously crafted collectible designed for adult enthusiasts of Kamen Rider OOO. This holder serves as a dedicated storage solution for your O-Medals, replicating the design seen in the series. It is an essential accessory for organizing and displaying your O-Medal collection, ensuring they are kept secure and accessible.

Figure 1: Front view of the BANDAI CSM O Medal Holder.

2. Product Contents

Your package should contain the following item:

• One (1) BANDAI Complete Selection Modification CSM O Medal Holder

Please inspect all contents upon receipt to ensure no items are missing or damaged.

3. Setup

3.1 Unpacking

1. Carefully remove the O Medal Holder from its packaging.
2. Retain the packaging for future storage or transport, if desired.

3.2 Initial Inspection

Before use, visually inspect the O Medal Holder for any signs of damage that may have occurred during shipping. If any damage is observed, please refer to the 'Warranty and Support' section.

4. Operating Instructions

4.1 Storing O-Medals

The CSM O Medal Holder is designed to securely store O-Medals. It can accommodate up to 24 O-Medals, including those from the 'CSM Ooz Driver Complete Set' and 'CSM Ooz Driver', as well as other 'O-Medal' series toys and 'Premium O MEDAL COLLECTION' items.

1. Open the O Medal Holder by gently unlatching the clasp.
2. Carefully insert each O-Medal into the designated slots. Ensure the medals are oriented correctly to fit snugly.
3. Once all desired medals are placed, close the holder and secure the clasp.

Figure 2: O-Medals being stored within the holder.

4.2 Display

The O Medal Holder can be displayed either closed, showcasing its exterior design, or open, to present your collection of O-Medals. Choose a stable, flat surface for display.

5. Maintenance

5.1 Cleaning

To maintain the appearance of your O Medal Holder:

• Wipe the exterior with a soft, dry cloth.
• Avoid using abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
• For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth.

5.2 Storage

When not in use or on display, store the O Medal Holder in a cool, dry place away from direct sunlight and extreme temperatures. This will help preserve its condition over time.

6. Troubleshooting

6.1 Medals Not Fitting

If an O-Medal does not fit into a slot:

• Ensure the O-Medal is correctly oriented. Some medals may have specific alignment requirements.
• Verify that the medal is an authentic O-Medal compatible with the holder.
• Do not force medals into slots, as this may cause damage to both the medal and the holder.

6.2 Minor Scratches or Wear

As a collectible item, minor wear may occur over time with handling. Handle the holder with care to minimize such occurrences.

7. Specifications

8. Warranty and Support

This product is covered by the manufacturer's standard warranty. For specific warranty details, claims, or technical support, please refer to the official BANDAI website or contact their customer service department. Please retain your proof of purchase for any warranty-related inquiries.