Coaster Fine Furniture LAVON 102671-S5 5-Piece Dining Set Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Coaster Fine Furniture LAVON 102671-S5 5-Piece Wood Dining Set. This set includes an extendable dining table with a storage pedestal base and four lattice back chairs, all finished in espresso. Please read these instructions carefully before beginning assembly or use to ensure proper setup and longevity of your furniture.

Image 1.1: The complete Coaster Fine Furniture LAVON 5-Piece Dining Set, featuring an extendable table and four lattice back chairs in an espresso finish.

2. Safety Information

Always follow basic safety precautions when assembling and using this product to reduce the risk of injury or damage. Keep all small parts and packaging materials away from children. Ensure all connections are secure before use. Do not stand on the table or chairs. Use on a level surface.

3. Setup and Assembly

Assembly is required for this dining set. It is recommended to have two adults for assembly. Ensure all parts are present before beginning. Refer to the included assembly hardware and diagrams for specific steps.

3.1. Unpacking

• Carefully remove all components from the packaging.
• Place components on a soft, clean surface (e.g., a blanket or carpet) to prevent scratches.
• Verify all parts are present against the parts list (not provided in this document, refer to product packaging).

3.2. Table Assembly

1. Attach the storage pedestal base to the tabletop using the provided hardware. Ensure proper alignment.
2. Secure all bolts and fasteners, but do not overtighten until the table is fully assembled.
3. Once the table is upright and stable, fully tighten all fasteners.

Image 3.1: Angled view of the dining table, highlighting the extendable top and the storage pedestal base.

3.3. Chair Assembly

1. Attach the chair back to the seat frame.
2. Attach the front legs to the seat frame.
3. Attach the side and front stretchers between the legs for stability.
4. Secure the padded seat cushion to the chair frame.
5. Repeat for all four chairs.

Image 3.2: Side view of a single lattice back dining chair with a padded seat.

4. Operation

4.1. Extending the Dining Table

The dining table features an 18-inch extension leaf to adjust its size. To extend the table:

1. Gently pull the two halves of the tabletop apart from the center.
2. Locate the 18-inch extension leaf and place it securely into the gap created.
3. Push the tabletop halves back together until they are flush with the extension leaf and locked into place.

To retract the table, reverse these steps, storing the leaf in a safe place when not in use.

Image 4.1: Top-down view of the dining table with the extension leaf inserted, showing its full length.

4.2. Using the Storage Pedestal

The table's pedestal base includes a closed storage unit and an open shelf. Use these for convenient storage of dining essentials such as placemats, napkins, or small serving dishes. Ensure items are placed securely to prevent shifting.

Image 4.2: Front view of the dining table, clearly showing the storage pedestal with its closed unit and open shelf.

5. Care and Maintenance

Proper care will help maintain the beauty and longevity of your dining set.

• Wood Surfaces: Wipe wood surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. Polish periodically with a furniture polish suitable for wood.
• Upholstered Seats: The product care instructions specify "Cleaning Code: X". This means to clean with a vacuum or soft brush only. Do not use water or solvent-based cleaners.
• General Care: Avoid direct sunlight and extreme temperature changes. Use coasters and placemats to protect surfaces from spills and heat. Periodically check and tighten all hardware connections.

Image 5.1: Close-up textures of the espresso wood finish and the black faux leather upholstery on the chair seats.

6. Troubleshooting

If you encounter any issues with your dining set, consider the following common solutions:

• Wobbly Table/Chairs: Ensure all assembly bolts and fasteners are securely tightened. Check that the furniture is on a level surface.
• Sticking Extension Leaf: Ensure the table halves are pulled apart sufficiently before inserting or removing the leaf. Check for any obstructions in the track mechanism.
• Minor Scratches: For minor scratches on wood, a wood repair marker or polish can often minimize their appearance.

For persistent issues or concerns not addressed here, please contact customer support.

7. Specifications

7.1. Dimensions

• Dining Table Dimensions: 42.25 - 60 inches (W) x 42 inches (D) x 30.5 inches (H)
• Side Chair Dimensions: 18.5 inches (W) x 21.25 inches (D) x 38.25 inches (H)
• Side Chair Seat Dimensions: 18 inches (W) x 16.75 inches (D) x 19.25 inches (H)

Image 7.1: Technical diagram illustrating the dimensions of the dining table.

Image 7.2: Technical diagram illustrating the dimensions of a dining chair.

8. Warranty Information

This product is covered by a 65-year limited warranty from the manufacturer, Coaster Fine Furniture. For specific details regarding coverage, terms, and conditions, please refer to the warranty documentation included with your purchase or contact Coaster Fine Furniture directly.

9. Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Coaster Fine Furniture customer support. You can typically find contact information on the product packaging or on the official Coaster Fine Furniture website.

For additional product information, you may visit the Coaster Fine Furniture Store on Amazon.