FITUEYES Dual Monitor Stand DT108001WB Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your FITUEYES Dual Monitor Stand, model DT108001WB. This adjustable 3-shelf wood desktop riser is designed to elevate your monitors to an ergonomic viewing height, reduce neck and shoulder strain, and optimize your workspace organization.

By following these guidelines, you can ensure proper setup and long-term functionality of your monitor stand.

Figure 1.1: Incorrect posture with monitor too low, leading to neck strain.

Figure 1.2: Correct posture with monitor elevated to eye level, promoting spinal alignment.

2. Safety Information

Please read and understand all safety instructions before assembly and use. Failure to do so may result in injury or product damage.

• Weight Capacity: Do not exceed the maximum load capacity of 55 pounds (25 kg). Overloading can cause instability and damage.
• Stable Surface: Always place the monitor stand on a flat, stable, and level surface to prevent tipping.
• Proper Assembly: Ensure all screws and connections are securely tightened before placing any equipment on the stand.
• Children and Pets: Keep small parts away from children and pets during assembly.
• Placement: Distribute weight evenly across the stand's surface. Avoid placing heavy items solely on the adjustable side sections without proper support.

3. Package Contents

Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Center Shelf Section (1)
• Side Shelf Sections (2)
• Support Legs (various sizes for center and sides)
• Connecting Pins/Screws
• Wood Dowels
• Rubber Anti-slip Pads
• Assembly Tool (e.g., screwdriver)
• Instruction Manual (this document)

Figure 3.1: Illustration of the monitor stand components for assembly.

4. Setup and Assembly

Assembly is designed to be straightforward and can typically be completed by one person in approximately 5 minutes. No additional tools are required beyond what is provided.

1. Identify Components: Lay out all parts and identify the center shelf, two side shelves, and the various support legs. Note that there are different length legs for the center and side sections.
2. Attach Legs to Center Shelf: Secure the appropriate support legs to the underside of the center shelf using the provided screws and wood dowels. Ensure they are firmly tightened.
3. Attach Legs to Side Shelves: Similarly, attach the support legs to the underside of the two side shelf sections.
4. Connect Side Sections to Center: Align the pre-drilled holes on the side sections with the connecting pins/screws on the center section. Gently push them together to form the desired length and angle. The design allows for free rotation and adjustment of the side sections.
5. Apply Anti-slip Pads: Affix the rubber anti-slip pads to the bottom of all support legs to prevent sliding and protect your desk surface.

Figure 4.1: Detail of screw installation during assembly.

Figure 4.2: Product dimensions and adjustable configuration options.

5. Operating Instructions

The FITUEYES Dual Monitor Stand offers versatile configurations to suit your workspace needs.

• Adjusting Length and Angle: The two side sections are designed to swivel freely from the center section. This allows you to adjust the overall length and angle of the stand to accommodate single or dual monitors, or to fit into a corner desk setup.
• Monitor Placement: Place your monitors on the elevated surfaces. The stand is suitable for monitors larger than 25" to 27". Ensure monitors are centered and stable.
• Workspace Organization: Utilize the space underneath the stand to store keyboards, mice, notebooks, and other desk accessories, helping to keep your desktop tidy.
• Versatile Use: The stand can also support other equipment such as laptops, printers, or decorative items, provided they do not exceed the weight capacity.

Figure 5.1: Example of a dual monitor setup with organized accessories.

Figure 5.2: Stand configured for a corner desk, demonstrating angle adjustment.

Figure 5.3: Versatile uses of the stand, including supporting a printer, laptop, and decorative items.

6. Maintenance

To ensure the longevity and appearance of your FITUEYES Dual Monitor Stand, follow these simple maintenance guidelines:

• Cleaning: Wipe the stand regularly with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the wood finish.
• Dusting: Use a dry cloth or duster to remove dust from the surfaces.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Avoid Moisture: Do not expose the stand to excessive moisture or direct sunlight, which can cause warping or discoloration.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information, product support, or to report missing/damaged parts, please contact FITUEYES customer service directly. Refer to your purchase documentation or the official FITUEYES website for contact details.

An additional user guide in PDF format may be available for download: FITUEYES Monitor Stand User Guide (PDF).