LONDAFISH Triple Jet Flame Butane Torch Lighter User Manual

1. Important Safety Warnings

• Keep out of reach of children.
• Ignite lighter away from face and clothing.
• Do not puncture or incinerate lighter.
• Do not expose to temperatures above 49°C (120°F).
• Never attempt to disassemble or modify the lighter.
• Ensure flame is extinguished after each use.
• Use only high-quality butane fuel.
• Avoid prolonged exposure to direct sunlight.

2. Product Overview

The LONDAFISH Triple Jet Flame Butane Torch Lighter is a robust and versatile tool designed for various ignition needs. It features a wind-resistant triple torch flame, a built-in punch cutter, and a convenient butane fuel window.

Figure 2.1: Labeled components of the LONDAFISH Triple Jet Flame Lighter, showing the safety cover, butane window, ignition button, butane refill hole, and cigar punch tool.

Key Features:

• Triple Jet Flame: Provides a powerful, wind-resistant flame for quick and efficient ignition.
• Butane Fuel Window: Allows for easy monitoring of fuel levels.
• Integrated Punch Cutter: A convenient tool for cigar preparation.
• Adjustable Flame: Control the flame height to suit your needs.
• Durable Construction: Made from zinc for longevity.

3. Setup

3.1 Unpacking

Carefully remove the lighter from its packaging. Inspect the lighter for any visible damage. The lighter is shipped without fuel for safety reasons.

3.2 Butane Refilling

Before refilling, ensure the lighter is completely empty of gas. This is crucial to prevent air pockets that can hinder proper ignition.

1. Purge Residual Air: Invert the lighter and use a small screwdriver or similar tool to press the butane refill valve (located at the bottom of the lighter). Hold it down until all residual air and gas are expelled. You may hear a hissing sound. This step is vital for optimal performance.
2. Prepare Butane Canister: Use a high-quality butane fuel canister with a long nozzle.
3. Refill: Invert the lighter and firmly press the butane canister nozzle into the refill valve. Hold for approximately 5-10 seconds. Repeat this process 2-3 times to ensure a full refill.
4. Wait: After refilling, wait for at least 5 minutes before attempting to ignite the lighter. This allows the gas to stabilize and reach room temperature.

Figure 3.1: Proper technique for refilling the butane lighter, demonstrating how to invert the lighter and press the butane canister nozzle into the refill valve.

4. Operating Instructions

4.1 Ignition

1. Open the safety cover.
2. Press the ignition button firmly. The triple jet flames will ignite.
3. Release the ignition button to extinguish the flame.

Figure 4.1: The LONDAFISH Triple Jet Flame Lighter in operation, showing the powerful blue flame.

4.2 Flame Adjustment

The flame height can be adjusted using the flame adjustment wheel located at the bottom of the lighter.

1. Locate the flame adjustment wheel at the bottom of the lighter.
2. Use a small flat-head screwdriver or a similar tool to turn the wheel.
3. Turn towards the '+' sign for a larger flame and towards the '-' sign for a smaller flame.
4. Note: Do not adjust to the absolute lowest setting, as this may prevent ignition. Do not force the adjustment wheel.

Figure 4.2: Detail of the flame adjustment mechanism, indicating the '+' and '-' symbols for increasing or decreasing flame height.

4.3 Using the Punch Cutter

The integrated punch cutter is located at the bottom of the lighter, opposite the refill valve.

1. Push the button down on the side of the lighter to release the punch cutter tool.
2. Carefully use the punch cutter to create a clean hole in your cigar.
3. Retract the punch cutter when not in use.

Figure 4.3: The integrated cigar punch cutter extended from the lighter body, ready for use.

5. Maintenance

5.1 Cleaning

Regular cleaning helps maintain the lighter's performance and appearance.

• Use a soft, dry cloth to wipe the exterior of the lighter.
• For stubborn spots, a slightly damp cloth can be used, followed by immediate drying.
• Keep the burner nozzles free from debris. Use a can of compressed air if necessary.

5.2 Storage

Store the lighter in a cool, dry place, away from direct sunlight and heat sources. Ensure the lighter is empty of fuel if storing for extended periods.

6. Troubleshooting

• Lighter Not Igniting:
  • Check fuel level using the butane window. If low, refill the lighter (refer to Section 3.2).
  • Ensure the lighter has been properly purged of air before refilling.
  • Verify the flame adjustment is not set to the lowest possible setting. Adjust slightly higher.
• Weak or Inconsistent Flame:
  • This often indicates air in the fuel tank or low fuel. Purge and refill the lighter.
  • Ensure you are using high-quality butane fuel.
• Gas Leakage:
  • If you detect a gas leak, immediately move to a well-ventilated area.
  • Do not attempt to ignite the lighter.
  • Contact customer support if the issue persists after ensuring the refill valve is properly sealed.

7. Specifications

8. Warranty and Support

LONDAFISH provides a 90-day return and refund service for this product. For any questions or concerns, please contact our customer support. All emails will be replied to within 24 hours.

For further assistance, please refer to the official LONDAFISH store or contact the seller directly.

9. Product Video