1. Introduction
This manual provides instructions for the Saicoo S0201B-ESMC USB-C Smart Card Reader. This device is designed for various contact smart card operations, including online banking, digital signature applications, and government ID access.
Image 1.1: Saicoo USB-C Smart Card Reader with a Common Access Card (CAC) inserted, demonstrating its primary function.
2. Features
- USB-C Connectivity: Features a reversible Type-C connector for easy connection.
- Wide Card Compatibility: Supports 5V, 3V, and 1.8V Smart Cards, ISO 7816 Class A, B, and C. Compatible with CAC (Common Access Card), Government ID, and National ID cards.
- Automatic Card Detection: Powers on and off automatically when a card is inserted or removed.
- Ergonomic Design: Features a stable, vertical design with a reinforced base to prevent tipping.
- Security Standards: PIV and EMS ready, meeting ISO7816 Class A, B, and C standards.
- High-Speed Data Transmission: Supports data transfer rates up to 12 Mbps.
3. System and Card Compatibility
3.1 System Requirements
- Windows (32/64bit) XP/Vista/7/8/10/11
- Mac OS X
- Linux / Chromebook OS
Note: No drivers are required for Windows 11/10/8/7 or Mac OS 10.11.1 and above. The device is plug-and-play for these operating systems.
3.2 Card Compatibility
The Saicoo S0201B-ESMC is compatible with a wide range of smart cards and applications:
- Banks, post office, and chip cards issued nationwide.
- Common Access Card (CAC), Government ID, National ID.
- Applications for digital authentication and security, including online-banking, digital signatures, Network ATM transfers, payment, balance inquiries, tax payments, utility payments, credit card bill payments, and cash card payments.
- Specific applications such as ActivClient, AKO, OWA, DKO, JKO, NKO, BOL, GKO, Marinenet, AF Portal, Pure Edge Viewer, ApproveIt, DCO, DTS, LPS, and Disa Enterprise Email.
Image 3.1: The Saicoo USB-C Smart Card Reader illustrating its compatibility with various card types and applications, including hospital, bank, military, and online payment systems.
4. Setup Instructions
4.1 Initial Connection
- Connect the USB-C cable from the smart card reader to an available USB-C port on your computer.
- For Windows 11/10/8/7 and Mac OS 10.11.1 and above, the device is plug-and-play and should be recognized automatically.
4.2 Driver Installation (If Required)
For older operating systems or specific configurations, manual driver installation might be necessary. Please visit the official Saicoo website for the latest drivers.
4.3 Special Considerations
- DOD and USG Users: A third-party CAC Enabler program is required to utilize the full functionality of your CAC card.
- Mac Users: Java must be installed on your system for certain smart card operations. Please install Java first. Related links can often be found on the smart card page of the Saicoo website.
Image 4.1: The Saicoo USB-C Smart Card Reader in use, connected to a laptop, demonstrating a typical setup for accessing smart card functions.
5. Operating Instructions
5.1 Inserting a Smart Card
Gently insert your smart card into the designated slot on the reader with the chip facing upwards and towards the reader. Ensure the card is fully seated for proper contact.
5.2 Using the Reader
Once the card is inserted and recognized by your system, you can proceed with your desired smart card operation. This may include:
- Logging into secure government or military websites.
- Accessing online banking services.
- Applying digital signatures to documents.
- Performing secure transactions.
Follow the prompts provided by your operating system or specific application to complete the smart card operation.
5.3 Removing a Smart Card
After completing your task, gently pull the smart card out of the reader. The reader will automatically power down when the card is removed.
6. Specifications
| Model Number | S0201B-ESMC |
| Connectivity Technology | USB Type C |
| Card Types Supported | 5V, 3V, and 1.8V Smart Cards, ISO 7816 Class A, B and C |
| Certifications Standards | ISO-7816 & EMV2 2000 Level 1, CE, FCC, VCCI, CCID, Microsoft WHQL, EMV, USB-IF CCID standard |
| Data Transmission Speed | Up to 12 Mbps |
| Product Dimensions | 6.3 cm (2.48") L x 6.3 cm (2.48") W x 6.3 cm (2.48") H (approximate, based on image) |
| Item Weight | 3.52 ounces |
Image 6.1: Front and side views of the Saicoo USB-C Smart Card Reader with its dimensions clearly marked.
7. Troubleshooting
7.1 Device Not Recognized
- Ensure the USB-C cable is securely connected to both the reader and your computer.
- Try connecting the reader to a different USB-C port on your computer.
- Restart your computer and try again.
- Verify that your operating system is up to date.
- If using an older OS, check the Saicoo website for specific drivers.
7.2 Smart Card Not Reading
- Ensure the smart card is inserted correctly with the chip facing upwards and fully seated.
- Clean the smart card's chip with a soft, dry cloth to remove any dust or debris.
- Confirm that the smart card itself is not damaged.
- For DOD/USG cards, ensure you have a compatible third-party CAC Enabler program installed and configured correctly.
- For Mac users, confirm that Java is installed on your system.
- Check the settings of the application you are using to access the smart card.
7.3 Slow Performance
- Ensure no other demanding USB devices are connected to the same USB hub, which might affect performance.
- Verify that your computer meets the minimum system requirements for the smart card applications you are using.
8. Warranty and Support
The Saicoo S0201B-ESMC USB-C Smart Card Reader comes with an 18-month warranty from the date of purchase.
Saicoo also provides lifetime technical support for this product. If you encounter any issues or have questions not covered in this manual, please contact Saicoo customer support through their official website or the contact information provided with your purchase.