SuperATV 3" UTV Lift Kit Instruction Manual

1. Product Overview

The SuperATV 3" UTV Lift Kit is engineered to provide an additional three inches of ground clearance for your 2018+ Can-Am Maverick Trail 800 or 1000. This enhancement allows for the installation of larger tires, up to 30 inches, significantly improving your vehicle's off-road capability. The kit is designed to maintain the steering radius and ride comfort, ensuring a balanced performance upgrade.

Constructed from CNC milled 6061 aluminum alloy, the high-strength spacers are built for durability and longevity, providing a robust and reliable lift for your UTV.

Image: Front view of a Can-Am Maverick Trail UTV with the SuperATV 3-inch lift kit installed.

2. Safety Information

⚠ California Proposition 65 Warning: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

Always ensure your vehicle is on a stable, level surface before beginning any installation or maintenance. Use appropriate safety gear, including eye protection and gloves. If you are unsure about any step, consult a qualified mechanic.

3. Setup and Installation

SuperATV has transitioned to a paperless system for installation instructions. To access the detailed, step-by-step installation guide for your 3" UTV Lift Kit, please scan the QR code provided on your product invoice using any smart device (tablet, smartphone, etc.). This provides instant and easy access to the most current instructions.

General Installation Overview:

1. Safely lift and secure the vehicle.
2. Remove the wheels and access the suspension components.
3. Install the aluminum spacers onto the shocks as per the detailed instructions.
4. Reassemble the suspension and wheels, ensuring all fasteners are torqued to specifications.
5. Perform a final inspection and test drive in a safe environment.

Image: The durable aluminum alloy spacers included in the lift kit.

Image: Close-up of the lift kit component installed on the UTV's suspension.

4. Operating Considerations

After installing the 3" UTV Lift Kit, your vehicle will have increased ground clearance, allowing it to traverse more challenging terrain. You can now fit tires up to 30 inches for even greater capability.

The SuperATV lift kit is engineered to maintain a comfortable ride quality and good handling characteristics, minimizing the typical compromises associated with lift kits. However, always be mindful of the altered center of gravity and adjust your driving style accordingly, especially on uneven terrain or during sharp turns.

Image: Side view of the UTV with the lift kit, demonstrating increased height.

5. Maintenance

Regular inspection of your UTV's suspension components is crucial, especially after installing a lift kit. Pay attention to the following:

• Fastener Torque: Periodically check and re-torque all bolts and nuts associated with the lift kit and suspension to ensure they remain secure.
• Component Wear: Inspect the lift kit spacers, shocks, and other suspension parts for any signs of wear, damage, or corrosion.
• Alignment: After installation, it is recommended to check and adjust your vehicle's alignment to ensure proper tire wear and handling.
• Cleaning: Keep the lift kit components clean, especially after off-road use, to prevent dirt and debris buildup that could lead to premature wear.

6. Troubleshooting

If you encounter any issues after installing your SuperATV 3" UTV Lift Kit, consider the following:

• Unusual Noises: Check all installed components for proper seating and torque. Loose fasteners can cause rattling or clunking sounds.
• Uneven Ride Height: Verify that all spacers are correctly installed and seated on both sides of the vehicle. Ensure no components are binding.
• Poor Handling/Steering: Re-check alignment. Ensure tire pressure is correct. If issues persist, re-verify installation steps against the official instructions.
• Tire Rubbing: If larger tires are installed, ensure there is adequate clearance during full suspension travel and steering lock. Trimming may be required in some cases, or smaller tires may be necessary.

For persistent issues, refer to the detailed installation instructions accessed via the QR code or contact SuperATV customer support.

7. Specifications

8. Warranty and Support

For information regarding product warranty, returns, or technical support, please visit the official SuperATV website or contact their customer service directly. You can also refer to the contact information provided on your purchase invoice.

Visit the SuperATV Store on Amazon for more products and information.