NATNO 45W AC Adapter for HP Laptops (19.5V 2.31A) - Models 15-BS000, 17-BS000 Series Instruction Manual

Introduction

This manual provides essential information for the safe and efficient use of your NATNO 45W AC Adapter. Please read these instructions carefully before using the product to ensure proper functionality and to prevent damage to your device or the adapter.

Safety Information

To ensure safe operation, observe the following precautions:

Do not expose the adapter to water or excessive moisture.
Avoid dropping or subjecting the adapter to severe impacts.
Do not disassemble or attempt to repair the adapter yourself. Refer to qualified service personnel.
Ensure the adapter is used in a well-ventilated area to prevent overheating.
Only use the adapter with compatible devices as specified in this manual.
Unplug the adapter from the power outlet when not in use for extended periods.

Diagram showing safety features of the NATNO AC adapter including over voltage, over charge, over heating, and over current protection.

Figure 1: Safety and Multiple Protection Features. The adapter is designed with built-in safeguards against over voltage, over charge, over heating, and over current to protect your laptop.

Package Contents

The package contains the following item:

1 x NATNO 45W AC Adapter/Laptop Charger

Setup

Connect the AC Power Cord: Plug the AC power cord into the adapter's power input port. Ensure a secure connection.
Connect to Power Outlet: Insert the AC power cord's plug into a standard wall power outlet (100-240V AC).
Connect to Laptop: Carefully insert the adapter's DC output connector (4.5mm x 3.0mm blue tip) into the power input port of your compatible HP laptop.

NATNO 45W AC Adapter with its power cord and laptop connector.

Figure 2: NATNO 45W AC Adapter. This image shows the adapter unit with its attached DC cable and the separate AC power cord.

Operating Instructions

Once connected, the adapter will automatically begin charging your laptop's battery and/or power the laptop directly. A charging indicator light on your laptop (if present) should illuminate.

Ensure all connections are firm before use.
Do not force the connector into your laptop's port. If it does not fit easily, verify compatibility.
It is normal for the adapter to feel warm during operation. If it becomes excessively hot, disconnect it immediately and refer to the troubleshooting section.

Compatibility

This NATNO 45W AC Adapter is specifically designed for HP laptops requiring 19.5V output with 2.31A current and a 4.5mm x 3.0mm connector tip. It is compatible with, but not limited to, the following HP laptop series and models:

Image showing various compatible HP laptop model series for the NATNO 45W AC adapter, including 15-AC000, 15-AY000, 15-BA000, 15-BS000, 15-CS000, 15-DA000, 15-DB000, 15-DY000, 15-F000, 15-G000, 15-R000, 17-BS000, 17-BY000, 17-X000, and 17-Y000.

Figure 3: Compatible HP Laptop Model Series. This image lists various HP laptop series that are compatible with this 45W adapter.

Compatible HP Laptop Series:

HP 15-BS000 Series (e.g., 15-bs168cl, 15-bs010ds, 15-bs013dx, 15-bs060wm, 15-bs192od, 15-bs033cl, 15-bs095ms, 15-bs015dx, 15-bs020wm, 15-bs016dx, 15-bs038dx, 15-bs078cl, 15-bs060wm, 15-bs013nr, 15-bs077nr, 15-bs053od, 15-bs091ms, 15-bs080wm, 15-bs053od, 15-bs131nr, 15-bs023cy, 15-bs016dx, 15-bs038cl, 15-bs058ca, 15-bs065nr, 15-bs091ms, 15-bs132nr, 15-bs008cy, 15-bs011cy, 15-bs234w, 15-bs212wm, 15-bs144wm, 15-bs134wm, 15-bs115dx, 15-bs289wm, 15-bs033cl, 15-bs244wm, 15-bs091ms, 15-bs070wm)
HP 17-BS000 Series (e.g., 17-bs049dx, 17-bs067cl, 17-bs010nr, 17-bs020nr, 17-bs017cy, 17-bs018dx, 17-bs011dx, 17-bs014cy, 17-bs019dx, 17-bs051od, 17-bs061st, 17-bs057cl, 17-bs027cy, 17-bs027ds, 17-bs057cl, 17-bs058cl, 17-bs069nr, 17-bs072nr, 17-bs010ds, 17-bs010nr, 17-bs061st, 17-bs062st, 17-bs057cl, 17-bs058cl)
HP 15-BA000 Series (e.g., 15-ba009dx, 15-ba079dx, 15-ba015wm, 15-ba018wm, 15-ba009ns, 15-ba013cl, 15-ba014nr, 15-ba154nr, 15-ba051wm, 15-ba037cl, 15-ba042nr, 15-ba013ds, 15-ba015ds, 15-ba061dx, 15-ba013cy, 15-ba007cy)
HP 15-BW000 Series (e.g., 15-bw011dx, 15-bw053od, 15-bw033wm, 15-bw017cl, 15-BS015dx, 15-BS013dx, 15-bw032wm)
HP 15-AC000 Series (e.g., 15-ac121dx, 15-ac143dx, 15-ac037cl, 15-ac139ds, 15-ac134ds, 15-ac138ds, 15-ac061nr, 15-ac113cl, 15-ac163nr, 15-ac143wm, 15-ac158dx, 15-ac130ds, 15-ac157cl, 15-ac156nr)
HP 15-AY000 Series (e.g., 15-ay009dx, 15-ay039wm, 15-ay041wm, 15-ay103dx, 15-ay061nr, 15-ay052nr, 15-ay065nr, 15-ay087cl, 15-ay122cl, 15-ay015dx, 15-ay091ms, 15-ay198nr, 15-ay013dx, 15-ay011nr)
HP 15-CS000 Series (e.g., 15-cs3073cl, 15-cs3153cl, 15-cs3075wm, 15-cs0051wm, 15-cs2079nr, 15-cs3019nr, 15-cs3055wm, 15-cs0072wm, 15-cs0053cl)
HP 15-DB000 Series (e.g., 15-db0031nr, 15-db0011dx, 15-db0015dx, 15-db0005dx, 15-db0047wm, 15-db0015dx, 15-db0011dx, 15-db0031nr, 15-db1003dx, 15-db0093wm, 15-db0066wm, 15-db0004dx, 15-db0051od)
HP 15-F000 Series (e.g., 15-f272wm, 15-f233wm, 15-f387wm, 15-f204wm, 15-f162dx, 15-f010dx, 15-f024wm, 15-f271wm, 15-f010wm, 15-f305dx, 15-f222wm, 15-f008cl, 15-f272w, 15-f018dx, 15-f209wm, 15-f004wm, 15-f097nr, 15-f125wm, 15-f033wn, 15-1272wm, 15-1233wm, 15-1387wm, 15-1018dx, 15-1004wm, 15-1013dx, 15-1097nr, 15-1033wn)

Compatible Part Numbers (P/N):

740015-002, 741727-001, TPN-LA03, 845611-001, PA-1450-56HA, 845836-850, A045R07DH, PA-1450-36HE, HSTNN-LA40, 719309-003, 721092-001, 719309-001, 740015-001, 740015-003, ADP-45FE B, HSTNN-DA40

Important Connector Information:

This adapter features a 4.5mm x 3.0mm connector with a blue tip. Please verify your laptop's power port matches this size and type. This adapter is designed for 45W systems and is not compatible with 65W or 90W systems.

Diagram illustrating the 4.5mm x 3.0mm connector size of the NATNO AC adapter.

Figure 4: Connector Size. This diagram clearly shows the dimensions of the 4.5mm x 3.0mm connector tip.

Comparison of 4.5mm x 3.0mm connector with 7.4mm x 5.0mm and USB-C connectors, highlighting the correct type for this adapter.

Figure 5: Confirming Connector Type. This image compares the correct 4.5mm x 3.0mm connector with incompatible 7.4mm x 5.0mm and USB-C types, emphasizing the importance of matching the connector.

Specifications

Feature	Specification
Input Voltage	AC 100-240V, 50-60Hz
Output Voltage	19.5V
Output Current	2.31A
Power Output	45W
Connector Size	4.5mm x 3.0mm (Blue Tip)
Cable Length	Approximately 9 feet (5ft AC cord + 4ft DC cord)
Item Weight	10.1 ounces
Dimensions (LxWxH)	9 x 3.2 x 1.1 inches
Color	Black
Manufacturer	DongGuan Simer Electronics Co.,LTD
Model Number	SK90195231

Diagram showing the 9-foot total length of the power cord, split into 5 feet for the AC cord and 4 feet for the DC cord, along with internal cable construction details like pure copper core, PVC shield, and insulation layer.

Figure 6: Cable Length and Construction. This image illustrates the total cable length and the internal structure of the power cable, highlighting its durable design.

Troubleshooting

Problem	Solution
Laptop not charging.	Ensure all cables are securely connected to the adapter, wall outlet, and laptop. Verify the wall outlet is functional by testing with another device. Confirm the adapter's specifications (voltage, amperage, wattage, connector size) match your laptop's requirements. Restart your laptop.
Adapter feels excessively hot.	Disconnect the adapter immediately. Ensure the adapter is in a well-ventilated area, not covered by blankets or other materials. Avoid placing the adapter on soft surfaces that can block airflow. If overheating persists after ensuring proper ventilation, discontinue use and contact customer support.
Connector does not fit into laptop.	Do not force the connector. Double-check your laptop's power port dimensions against the adapter's 4.5mm x 3.0mm connector size (refer to Figure 4 and Figure 5). Ensure you are inserting the connector correctly and not at an angle.

Maintenance

Keep the adapter clean and free from dust. Use a soft, dry cloth for cleaning.
Store the adapter in a cool, dry place when not in use.
Avoid tightly wrapping the cables around the adapter, as this can cause damage over time.
Regularly inspect the cables and connectors for any signs of wear or damage. If damage is found, discontinue use.

Warranty and Support

Your NATNO AC Adapter comes with the following warranty and support:

30 Days Money Back Guarantee: If you are not satisfied with your purchase, you may return it within 30 days for a full refund.
12 Months Exchange: The product is covered by a 12-month exchange warranty for manufacturing defects.

For warranty claims or technical support, please contact the seller or NATNO customer service through the platform where the product was purchased.

NATNO SK90195231