Introduction
Thank you for choosing the Walker Edison Montclair Mid Century Modern Coffee Table. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Safety Warning:
- Keep all small parts and packaging materials away from children.
- Assemble on a soft, clean surface to prevent scratching.
- Do not use power tools for assembly unless specifically instructed, as this may damage the product.
- Ensure all connections are secure before use.
Image: The Montclair coffee table featuring a dark walnut finish, glass top, and a single drawer, situated in a modern living room.
Package Contents
Verify that all components and hardware are present before beginning assembly. Your package should include:
- Table panels (top, bottom, sides, drawer components)
- Tempered safety glass panel
- Legs (4 units)
- Hardware Pack (screws, dowels, cam locks, drawer slides, etc.)
- Step-by-step assembly instructions
Setup and Assembly Instructions
This coffee table is designed for ready-to-assemble setup. Follow the included step-by-step instructions carefully. General assembly steps typically involve:
- Unpack and Identify Parts: Lay out all components and hardware. Compare them against the parts list in your instruction manual to ensure everything is present.
- Assemble the Main Frame: Connect the side panels to the bottom panel using the provided hardware (e.g., dowels, cam locks, screws). Ensure all connections are snug but do not overtighten screws to avoid stripping.
- Install Drawer Slides: Attach the drawer slides to the designated areas on the table frame and the drawer box. Pay attention to the orientation of the slides.
- Assemble the Drawer: Construct the drawer box using the drawer panels and hardware. Insert the assembled drawer into the slides.
- Attach the Legs: Securely fasten the four legs to the underside of the table.
- Place the Glass Top: Carefully position the tempered safety glass panel onto the designated area of the table top. Ensure it sits evenly and securely.
Image: Front view of the coffee table, showing the drawer and the open shelf with the glass top.
Image: Detailed view of one of the black tapered legs attached to the coffee table base.
Image: A close-up showing the open drawer and the adjacent open storage shelf, highlighting the wood grain.
Operating Instructions
The Montclair coffee table is designed for general living room use. Observe the following guidelines for optimal performance and longevity:
- Weight Capacity: The top surface supports up to 40 lbs. The bottom tier supports up to 30 lbs. The drawer supports up to 20 lbs. Do not exceed these limits to prevent damage or injury.
- Drawer Use: The single drawer provides concealed storage. Open and close the drawer gently to ensure smooth operation of the slides.
- Glass Top: The tempered safety glass top is durable but should be handled with care. Avoid placing extremely hot items directly on the glass without a coaster.
Image: Technical diagram illustrating the overall dimensions (42" L x 20" D x 18" H) and individual weight capacities for the top surface (40 lbs), bottom shelf (30 lbs), and drawer (20 lbs).
Image: The coffee table styled with a plant, candle, and books on the open shelf, demonstrating its functional use.
Maintenance
Proper care will help maintain the appearance and longevity of your coffee table.
- Cleaning Wood Surfaces: Wipe wood surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that can damage the laminate finish. Dry immediately with a clean cloth.
- Cleaning Glass Top: Use a standard glass cleaner and a soft, lint-free cloth to clean the tempered glass. Avoid spraying cleaner directly onto the wood frame.
- Spills: Clean spills immediately to prevent staining or damage to the wood finish.
- Hardware Check: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary, but do not overtighten.
Image: A detailed view of the dark walnut wood grain and the clear tempered glass surface, illustrating the materials to be maintained.
Troubleshooting
If you encounter issues during or after assembly, consider the following:
- Wobbly Table: Ensure all legs are securely attached and all frame screws are tightened. Uneven flooring can also cause wobbling; try repositioning the table or using furniture pads.
- Drawer Not Sliding Smoothly: Check that the drawer slides are correctly installed and aligned on both the drawer and the table frame. Ensure no debris is obstructing the slides.
- Stripped Screws: If a screw hole becomes stripped, avoid overtightening. You may need to use a wood glue and toothpick to fill the hole, allow it to dry, and then re-insert the screw carefully.
- Missing Parts: If any parts are missing from the hardware pack or main components, contact Walker Edison customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | AF42JMGLDW |
| Overall Dimensions (H x D x L) | 18” H x 22” D x 42” L (40.64 x 50.8 x 106.68 cm) |
| Drawer Dimensions (H x D x L) | 3.375” H x 15” D x 11” L (8.6 x 38.5 x 27.6 cm) |
| Top Surface Weight Capacity | Up to 40 lbs |
| Bottom Tier Weight Capacity | Up to 30 lbs |
| Drawer Weight Capacity | Up to 20 lbs |
| Materials | Warp-resistant MDF, Durable Laminate, Tempered Safety Glass, Alloy Steel, Wood |
| Color | Dark Walnut/Glass |
| Item Weight | 27.22 kg |
Warranty and Support
For warranty information, replacement parts, or further assistance, please refer to the warranty card included with your product or visit the official Walker Edison website. Ensure you have your model number (AF42JMGLDW) and purchase details available when contacting support.