User Manual

Product Overview

This manual provides instructions for the genuine replacement remote control designed for the 2018 Serta Motion Plus Adjustable Bed. It is crucial to ensure your original remote matches the appearance of the remotes shown in this manual for compatibility. This remote is specifically for the 2018 Serta Motion Plus model and may not function with any other Serta adjustable bed models.

The remote features an ergonomic design for comfortable handling and allows control over various bed functions, including head and foot articulation, massage settings, and pre-programmed positions like Flat and Zero Gravity.

Product Images

Image 1: Front view of the gray Serta Motion Plus replacement remote control. It features buttons for massage timers (10, 20, 30 min), Head and Foot adjustments (up/down), Timer/All Off, Snore, Wave, Flat, and Zero G positions. The Serta logo is visible at the bottom.

Image 2: Angled view of the black Serta Motion Plus replacement remote control. This image highlights the ergonomic shape and the illuminated button labels, which include controls for massage, head and foot articulation, and pre-set positions.

Setup and Syncing Instructions

This replacement remote requires syncing with your Serta Motion Plus Adjustable Bed. Follow these general steps for pairing. Specific instructions may vary slightly based on your bed's control box version.

1. Locate the Control Box: The control box is typically found underneath the bed frame, often near the head or foot end.
2. Power Cycle (Optional): Unplug the bed from the power outlet for 30 seconds, then plug it back in. This can sometimes reset the system.
3. Press the Learn/Pair Button: On the control box, locate a small button, often labeled "Learn," "Pair," or "Sync." Press and hold this button for approximately 3-5 seconds. A light on the control box may flash or change color, indicating it's in pairing mode.
4. Pair the Remote: While the control box light is flashing, immediately press and hold any button on the new remote control (e.g., the "Flat" button or "Head Up" button) for 3-5 seconds.
5. Confirmation: The light on the control box should stop flashing or change to a solid color, and the bed should respond to the remote's commands, indicating successful pairing.
6. Test Functions: Test all buttons on the remote to ensure full functionality.

If syncing is unsuccessful, repeat the steps. Ensure the remote has fresh batteries (not included) before attempting to pair.

Operating Instructions

Familiarize yourself with the remote's buttons to control your Serta Motion Plus Adjustable Bed.

• Head Up/Down: Use the HEAD arrow buttons to raise or lower the head section of the bed.
• Foot Up/Down: Use the FOOT arrow buttons to raise or lower the foot section of the bed.
• FLAT: Press the FLAT button to return the bed to a completely flat position.
• ZERO G: Press the ZERO G button to move the bed into the Zero Gravity position, which elevates the head and feet to promote circulation and relieve pressure.
• MASSAGE (10 MIN, 20 MIN, 30 MIN): These buttons activate the massage function for the specified duration. Press the desired time button to start the massage.
• TIMER/ALL OFF: This button can be used to turn off all active functions (like massage) or to stop the bed's movement.
• SNORE: Activates the anti-snore position, which slightly elevates the head to help reduce snoring.
• WAVE: Activates a wave massage pattern.

Maintenance

• Battery Replacement: The remote typically uses AAA batteries (not included). If the remote's range decreases or it becomes unresponsive, replace the batteries. Refer to the battery compartment on the back of the remote for proper orientation.
• Cleaning: Clean the remote with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as they may damage the remote's surface or internal components.
• Storage: Store the remote in a dry place, away from extreme temperatures and direct sunlight, when not in use for extended periods.

Troubleshooting

Specifications

• Product Type: Replacement Remote Control
• Brand: Serta Motion Plus
• Manufacturer: Serta Motion Plus
• Compatible Devices: 2018 Serta Motion Plus Adjustable Bed
• Color: Available in Gray and Black versions
• Special Feature: Ergonomic design
• Max Number of Supported Devices: 1 (per remote)
• ASIN: B07CBPFVQS
• First Available Date: April 7, 2018

Support and Warranty

For technical assistance, troubleshooting beyond this guide, or inquiries regarding warranty information, please contact the seller or manufacturer directly.

This product is sold by Salt Lake Mattress by Bradleys. For support, you may visit their Amazon seller page or contact them through the Amazon platform.

Note: Specific warranty terms and conditions are provided by the seller or manufacturer at the time of purchase. Please retain your purchase receipt for warranty claims.