Trail Tech 712-118 Striker Digital Gauge Kit User Manual

1. Introduction

The Trail Tech Striker digital gauge is a compact and versatile instrument designed to provide essential vehicle information. It features a speedometer, voltmeter, trip distance tracker, clock, and displays both ambient and engine temperatures. The Striker is particularly suitable for electric start vehicles and those requiring multiple accessory monitoring, offering programmable LED indicators for charging system warnings.

Figure 1: The Trail Tech Striker Digital Gauge. This image shows the compact black unit with its digital display active, indicating speed (SPD), miles per hour (M/H), trip distance (DST), voltage (V), air temperature (AIR), and current time (clock icon). Buttons for navigation are visible at the bottom.

2. What's in the Box

Verify that all components are present before beginning installation:

• Digital Gauge (Striker unit)
• 19 Millimeter Water Temperature Sensor
• Magnet Kit
• Wheel Sensor
• Mounting Hardware
• Power Lead

3. Setup and Installation

The Striker kit includes necessary handlebar mounting hardware. An optional aluminum dashboard accessory can be purchased separately for alternative mounting. Installation involves connecting sensors and customizing settings.

3.1. Sensor Installation

Install the provided sensors to your vehicle. Refer to the model-specific instructions for precise sensor placement and wiring. The kit includes a 19mm water temperature sensor and a wheel sensor.

3.2. Power Connection

The Striker can operate on regulated AC or 12V DC electrical systems. Connect the power lead according to your vehicle's electrical system and the detailed wiring diagram in your model-specific instructions.

3.3. Initial Configuration

After installation, customize the Striker for your wheel size and set thresholds for the voltage over/under warning lights. These settings ensure accurate readings and proper warning functionality.

4. Operating the Striker Digital Gauge

The Striker displays various parameters on its screen. Use the buttons located on the unit to navigate through modes and access settings.

4.1. Display Functions

• Speed (SPD): Displays current vehicle speed.
• Voltage (V): Shows real-time battery voltage. The unit also tracks minimum and maximum voltage values.
• Trip Distance (DST): Measures distance traveled for a specific trip.
• Clock: Displays the current time.
• Temperature (AIR/ENGINE): Shows both ambient air temperature and engine temperature.

4.2. Programmable LED Indicators

The Striker features programmable LED indicator lights. These can be configured to warn when the charging system is overwhelmed or when voltage levels fall outside user-defined thresholds.

5. Maintenance Timers

The Striker includes two separate maintenance timers: OIL and WRENCH. These timers can be programmed to remind you of scheduled maintenance tasks, such as oil changes or general service intervals. Consult your model-specific instructions for details on setting and resetting these timers.

6. Troubleshooting

If the Striker is not functioning as expected, consider the following:

• No Display: Check power connections and ensure the unit is receiving adequate voltage.
• Inaccurate Readings: Verify that sensors are correctly installed and calibrated (e.g., wheel size for speed).
• Warning Lights: If LED indicators are active, check your vehicle's charging system and battery voltage. Refer to your vehicle's service manual for electrical system diagnostics.
• Electrical System Compatibility: Ensure your vehicle's electrical system (AC or 12V DC) is compatible with the Striker.

For detailed troubleshooting steps, refer to the comprehensive manual provided with your specific Striker kit.

7. Specifications

8. Warranty and Support

For information regarding product warranty, technical support, or replacement parts, please refer to the official Trail Tech website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.