Dream On Me Anna 3-in-1 Convertible Full-Size Baby Crib & Changer Instruction Manual

1. Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Dream On Me Anna 3-in-1 Convertible Full-Size Baby Crib & Changer. This versatile furniture piece is designed to adapt to your child's growth, transitioning from a crib to a toddler bed and a full-size daybed. It also includes an integrated changing table with storage.

Please read all instructions carefully before assembly and retain this manual for future reference.

2. Safety Information

Your child's safety is our highest priority. The Dream On Me Anna Crib & Changer is designed and manufactured to meet or exceed all applicable safety standards.

• GREENGUARD Gold Certified: This product has been screened for over 10,000 chemicals and VOCs, contributing to cleaner indoor air.
• JPMA Certified: Certified by the Juvenile Products Manufacturers Association, ensuring it meets the highest safety standards.
• CPSIA Compliant: Lead and phthalate levels are well below federal safety limits.
• Weight Limit: The crib and attached changing table have a maximum weight recommendation of 50 pounds.
• Always ensure all hardware is securely tightened before each use.
• Never leave a child unattended on the changing table. Always use the safety strap provided.
• Do not use the crib if any parts are missing, damaged, or broken. Contact customer support for replacement parts.
• Keep small parts and plastic bags away from children during assembly.

3. Included Components

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Crib Frame Components
• Changing Table Components
• 1" Changing Pad
• Assembly Instruction Manual
• Hardware Pack (screws, bolts, etc.)

4. Setup and Assembly

Assembly of the Dream On Me Anna Crib & Changer is required. Please follow the detailed instructions provided in the separate Assembly Instruction booklet included with your product. Ensure you have adequate space and the necessary tools (typically a Phillips head screwdriver and Allen wrench, often included in the hardware pack).

• Unpack all components and lay them out on a soft, clean surface to prevent scratches.
• Identify all parts using the parts list in the assembly manual.
• Follow the step-by-step diagrams and instructions carefully.
• Do not overtighten screws during initial assembly; tighten fully once the unit is stable.
• Ensure the changing table is securely attached to the crib frame as per instructions.

5. Operating Instructions

5.1 Crib Mode

The Anna crib features 3 adjustable mattress height positions to accommodate your child's growth and ensure safety. The mattress (sold separately) should always be placed on the lowest setting once your child can stand.

• Highest Position: For newborns, allowing easier access to the baby.
• Middle Position: For infants who can push up on their hands and knees.
• Lowest Position: For toddlers who can stand or pull themselves up.

Refer to the assembly manual for instructions on adjusting the mattress support.

5.2 Changing Table Functionality

The integrated changing table provides a convenient and secure space for diaper changes and includes storage for essentials.

• The changing table comes with a 1-inch changing pad.
• Always use the safety strap with the easy-release buckle to secure your baby during changes.
• Two open shelves below the changing surface offer accessible storage for diapers, wipes, and other baby items.
• The changing table is detachable from the crib for independent use or when no longer needed.

5.3 Conversion Options

The Anna 3-in-1 crib is designed to convert into a toddler bed and a full-size daybed, extending its utility as your child grows. Conversion kits are sold separately.

• Toddler Bed: Converts by removing the front rail and adding a universal toddler guardrail (sold separately).
• Daybed: Converts by removing the front rail, providing an open-front seating option.

Refer to the specific conversion kit instructions for detailed steps.

6. Maintenance and Care

Proper care will ensure the longevity and safety of your Dream On Me Anna Crib & Changer.

• Cleaning: Wipe with a dry cloth. For stubborn marks, use a damp cloth with mild soap and water, then immediately dry thoroughly. Avoid abrasive cleaners or strong chemicals.
• Hardware: Periodically check all screws, bolts, and fasteners to ensure they are tight and secure. Do not overtighten.
• Storage: If storing the crib, disassemble it according to the instructions and store all parts in a dry, temperature-controlled environment.
• Finish: The crib is made from New Zealand pinewood with a durable finish. Avoid exposing it to direct sunlight or extreme temperature changes to prevent warping or fading.

7. Troubleshooting

If you encounter any issues with your Dream On Me Anna Crib & Changer, please refer to the following common solutions:

• Loose Parts: If any parts feel loose, re-tighten the corresponding hardware. Do not use the product if parts remain loose or damaged.
• Squeaking: Squeaking may occur due to loose joints. Check and tighten all assembly hardware.
• Difficulty with Conversion: Ensure all original hardware is used correctly and that conversion kits (if applicable) are installed according to their specific instructions.
• Missing Parts: If you discover missing parts during assembly, do not proceed. Contact Dream On Me customer support immediately.

For issues not covered here, please contact Dream On Me customer support.

8. Specifications

9. Warranty and Support

9.1 Warranty Information

The Dream On Me Anna 3-in-1 Convertible Full-Size Baby Crib & Changer is backed by a 1-year limited manufacturer’s warranty. This warranty covers manufacturing defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

The warranty does not cover damage resulting from improper assembly, misuse, abuse, alteration, or normal wear and tear.

9.2 Customer Support

For any questions regarding assembly, missing parts, warranty claims, or general product inquiries, please contact Dream On Me customer support:

• Website: dreamonme.com
• Phone: Refer to the Dream On Me website for current contact numbers.
• Email: Refer to the Dream On Me website for current contact email.

When contacting support, please have your product model number (678-SGY) and proof of purchase readily available.