Noe & Malu Floral Foam Blocks Instruction Manual

Introduction

This manual provides instructions for the proper use and care of Noe & Malu Floral Foam Blocks. These blocks are designed to support and hydrate fresh flowers, as well as securely hold artificial and dried arrangements. Each block measures 9 inches by 4 inches by 3 inches.

Image: Two Noe & Malu Floral Foam Blocks, showing their standard dimensions.

Key Features

• Effective Moisture Wicking and Stability: The foam wicks moisture to keep fresh floral arrangements vibrant and provides a stable base for designs.
• Versatile Wet and Dry Application: Suitable for fresh flowers (when soaked) and for securely holding artificial or dried flowers (used dry).
• Customizable Shaping: The soft, fine, and durable foam can be easily cut or molded into various shapes.
• Pliable Texture for Easy Shaping: The foam's texture allows for simple shaping and fitting into containers.
• Standard Pack Size: Each package contains two foam blocks, sized at 9" x 4" x 3" for general use.

Image: Visual representation of the floral foam's key attributes, including its ability to blend with stems, reusability, stability, absorption, and ease of shaping.

Setup for Fresh Flowers (Wet Use)

1. Prepare the Foam: If necessary, cut the foam block to the desired size and shape using a knife or floral cutter.
2. Soak in Water: Place the foam block into a basin of clean water. Allow it to absorb water naturally until it sinks completely. Do not force it underwater, as this can create dry pockets within the foam.
3. Placement: Once fully saturated, carefully place the foam into your chosen container or vase. Ensure it fits snugly to provide maximum stability for your arrangement.

Image: Step-by-step guide illustrating the preparation and use of floral foam for arrangements.

Operating Instructions

For Fresh Flower Arrangements:

• After soaking, insert the stems of fresh flowers directly into the saturated foam. The foam will hold the stems securely and provide continuous hydration.
• Ensure stems are cut at an angle before insertion for better water absorption.
• Periodically check the foam's moisture level and add water to the container as needed to keep the foam saturated and flowers hydrated for 7-10 days.

Image: A floral arrangement using the foam, highlighting its ability to keep flowers moist.

For Artificial or Dried Flower Arrangements:

• Use the foam blocks dry. The dense structure will firmly hold the stems of artificial or dried flowers, preventing movement.
• Cut the foam to fit your container or create specific shapes for your design.
• Insert stems directly into the dry foam. The foam's pliability allows for easy arrangement and repositioning.

Image: Examples of floral foam applications for various decorative purposes.

Shaping the Foam:

• The foam can be easily cut with a knife or scissors to achieve desired shapes for unique arrangements.
• Wear gloves if trimming extensively, as foam particles can be messy.

Image: Demonstrating how to cut floral foam into custom shapes.

Maintenance and Storage

• Reusability: While primarily designed for single-use with fresh flowers to ensure optimal hydration, the foam can be reused for artificial or dried arrangements if it retains its structural integrity.
• Storage: Store unused foam blocks in a cool, dry place away from direct sunlight to prevent degradation.
• Disposal: Dispose of used foam blocks according to local waste guidelines.

Troubleshooting

Problem: Foam not absorbing water properly.

Solution: Ensure the foam is allowed to soak naturally. Do not push it down into the water, as this can trap air inside and prevent full saturation. Let it sink on its own.

Problem: Flowers wilting quickly in fresh arrangements.

Solution: Verify that the foam is fully saturated before inserting flowers. Check water levels daily and replenish as needed. Ensure flower stems are cut at an angle and are inserted firmly into the foam.

Product Specifications

Image: Detailed dimensions of a single floral foam block.