Shop Japan FN002281

Shop Japan FN002281 Shark Steam Mop Basic Instruction Manual

Model: FN002281 | Brand: Shop Japan

1. Introduction

The Shop Japan FN002281 Shark Steam Mop Basic is designed to revolutionize floor cleaning with its high-temperature dry steam, exceeding 100°C. This powerful steam lifts dirt and grime, allowing for easy wiping and sanitization. It's simple, powerful, and speedy, requiring only tap water – no buckets, rags, or detergents needed. Weighing approximately 1.4kg, it's lightweight and easy to handle, even with one hand.

2. Important Safety Instructions

  • Always read all instructions before use. Use only as directed in this manual.
  • Keep the appliance away from children and pets.
  • Do not direct steam at people, animals, or electrical appliances.
  • Use only tap water; do not add cleaning solutions, perfumes, or other chemicals to the water tank.
  • Ensure the appliance is unplugged before filling or emptying the water tank, or performing any maintenance.
  • Do not leave the appliance unattended while plugged in or operating.
  • Allow the appliance to cool completely before storing.

3. Package Contents

Please check that all items are included in your package:

  • Main Unit x 1
  • Dedicated Microfiber Pads x 2
  • Water Supply Set (Measuring Cup) x 1
  • Dedicated Carpet Glider x 1

4. Setup

4.1 Assembly

  1. Assemble the Handle: Connect the handle sections firmly until they click into place.
  2. Attach the Mop Head: Securely attach the mop head to the main unit.

4.2 Filling the Water Tank

  1. Fill the Water Tank: Open the water tank cap. Use the provided measuring cup to fill the water tank with tap water. Do not overfill. Close the cap securely.
Filling the water tank of the Shark Steam Mop Basic

Image: Filling the water tank of the Shark Steam Mop Basic with the provided measuring cup.

  1. Attach Microfiber Pad: Securely attach a dedicated microfiber pad to the mop head.

5. Operating Instructions

  1. Power On: Plug the power cord into a suitable electrical outlet.
  2. Heat Up: The steam mop will begin to heat up. Wait approximately 30 seconds for the steam to be ready. The indicator light will signal when it's ready for use.
Shark Steam Mop Basic emitting steam during operation

Image: The Shark Steam Mop Basic in action, showing steam being released for cleaning.

  1. Start Cleaning: Gently glide the mop head over the floor surface. The high-temperature steam will loosen dirt and grime, which the microfiber pad will then absorb.
Woman comfortably using the Shark Steam Mop Basic without bending

Image: A woman demonstrating the ease of use of the steam mop, highlighting that it can be used while standing, reducing back strain.

  1. Carpet Cleaning: For carpets and rugs, attach the dedicated carpet glider over the microfiber pad before use.
  2. Continuous Use: The flow heater system allows for continuous use by refilling the water tank as needed.

6. Maintenance

  1. Unplug and Cool Down: Always unplug the steam mop and allow it to cool completely before cleaning or storing.
  2. Clean Microfiber Pads: Remove the microfiber pads after each use and wash them according to their care instructions (typically machine washable).
Microfiber pad being placed into a washing machine

Image: A microfiber pad being placed into a washing machine for cleaning.

  1. Empty Water Tank: If storing for an extended period, empty any remaining water from the tank.
  2. Wipe Down Unit: Wipe the exterior of the steam mop with a soft, damp cloth. Do not use abrasive cleaners or solvents.

7. Troubleshooting

No Steam

  • Check if the unit is properly plugged in.
  • Ensure the water tank is filled with water.
  • Allow sufficient time for the unit to heat up (approx. 30 seconds).
  • Check if the power button is pressed.

Water Leaking

  • Ensure the water tank cap is securely closed.
  • Do not overfill the water tank.
  • Ensure all connections (handle, mop head) are secure.

8. Specifications

Dimensions (Main Unit with pole)Approx. 118 cm (assembled)
Pad SizeApprox. 17 x 29.5 cm
WeightApprox. 1.4 kg
Power100V 50/60Hz
Power Consumption1500W
Cord LengthApprox. 5.0 m
Tank Capacity220 ml
FeaturesCompact design, recommended for interior and carpet use, stick form factor.
Sterilization Performance99.9% sterilization, 94.5% dust mite reduction, 99.9% pollen reduction (based on tests).
Comparison table of Shark Steam Mop models

Image: A comparison table showing features of different Shark Steam Mop models, including the Basic, Portable, and All-in-One versions. It details color options, compatible floor materials, applicable cleaning areas, steam adjustment, dusters, continuous use time, head mobility, self-standing capability, and test results for sterilization, dust mite reduction, and pollen reduction.

9. Product Videos

Mistsince Steam Cleaner NV602

Video: This video demonstrates the unboxing, assembly, and initial operation of the Mistsince NV602 steam cleaner. It shows how to connect the extension pipes, attach the mop head, fill the water tank, and activate the steam function. The video also highlights its use in cleaning kitchen surfaces like stovetops and sinks with various brush attachments.

Mistsince Steam Cleaner NV603A

Video: This video showcases the Mistsince NV603A steam cleaner, emphasizing its ability to clean various floor types effectively. It demonstrates the steam mop removing footprints, crayon marks, and oil stains, ensuring a clean and safe environment for babies and pets. The video also highlights its lightweight design, adjustable steam levels (LO, MI, HI), and suitability for different surfaces like wood, tile, and tatami mats.

Hybrid Steam Cleaner

Video: This video presents a hybrid steam cleaner, highlighting its lightweight design (2.1kg) and ease of use for various cleaning tasks. It shows the device cleaning floors, removing stubborn stains like crayon marks, and transforming into a handheld unit for cleaning kitchen stovetops and bathroom tiles with different attachments. The video emphasizes its versatility and rich accessories.

How to Use Mistsince Steam Cleaner NV603A

Video: This video provides a step-by-step guide on how to use the Mistsince NV603A steam cleaner. It covers filling the water tank, powering on the device, waiting for it to heat up (approx. 15 seconds), and then pressing the steam button to begin cleaning. The video demonstrates the steam mop in action, effectively cleaning floors.

10. Warranty and Support

For warranty information, product support, or service inquiries, please refer to the warranty card included with your product or contact Shop Japan customer service. Keep your purchase receipt as proof of purchase.

© 2023 Shop Japan. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.