Fangtek Handheld USB Barcode Scanner User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Fangtek Handheld USB Barcode Scanner. Designed for efficiency and ease of use, this 1D barcode reader is suitable for various applications including supermarkets, convenience stores, and warehouses. Please read this manual thoroughly to ensure optimal performance and longevity of your device.

Setup

Package Contents

• 1 x Fangtek Handheld USB Barcode Scanner
• 1 x USB Cable (attached)
• 1 x User Manual (this document)

Connecting the Scanner (Plug and Play)

The Fangtek barcode scanner is designed for simple plug-and-play installation. No additional drivers are typically required for most operating systems.

1. Locate an available USB port on your computer (Desktop or Laptop).
2. Insert the USB cable of the barcode scanner into the USB port.
3. Wait for your operating system to recognize the new hardware. This usually takes a few seconds.
4. The scanner will function as a keyboard input device, sending scanned data directly to any active text field.

Figure 1: The Fangtek Handheld USB Barcode Scanner with its integrated USB cable, ready for connection.

System Compatibility

The scanner is compatible with a wide range of operating systems, including Windows, Mac, and Linux. It integrates seamlessly with common software applications such as Microsoft Word, Excel, and Novell.

Operating Instructions

Basic Scanning Operation

To scan a barcode, aim the scanner's laser beam at the barcode and press the trigger button. A successful scan will typically be indicated by a beep and the data appearing in your active application.

Figure 2: Key features of the scanner, highlighting its buzzer warning, durable button, fast decoding, and driver-free operation.

Scanning Performance

• Scanning Speed: Up to 200 scans per second.
• Scanning Angle: Inclination angle 55°, Elevation angle 65°.
• Light Source: Visible Laser 650-670nm.
• Decode Capability: Supports Code11, Code39, Code93, Code32, Code128, Coda Bar, UPC-A, UPC-E, EAN-8, EAN-13, ISBN/ISSN, JAN.EAN/UPC Add-on2/5 MSI/Plessey, Telepen, China Postal Code, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, and more.

Figure 3: The scanner's capability to quickly decode various barcode conditions, including damaged, distorted, colorful, and reflective surfaces.

Figure 4: An illustration showing the high-quality 32-bit processor chip inside the scanner, contributing to its efficient performance.

Advanced Configuration (Programming Barcodes)

The scanner offers over 300 configurable options for prefix, suffix, and termination strings. These settings can be adjusted by scanning specific programming barcodes found in the included setup manual. Below are some common configuration options:

System Setup

• Version Information: 013301
• Restore Factory Settings: 013304

Interface Output Format

• USB Mode: 000708
• USB Virtual Serial Port: 000601
• Serial Port Mode: 000706

Sound Settings

• Turn On The Voice: 000707
• Turn Sound Off: 000603

Ending Character Settings

• Enter: 000709
• Carriage Return: 000705

Serial Port Baud Rate Settings

• 9600: 014200
• 11520: [No barcode provided]
• 19200: [No barcode provided]
• 38400: [No barcode provided]
• 57600: [No barcode provided]

Trigger Mode

• Single Trigger Mode: [No barcode provided]
• Automatic Continuous Scanning Mode: [No barcode provided]

Speed Setting

• The Fastest Transmission Speed: 001504
• Moderate Transmission Speed (Default): 001502
• The Transmission Speed Is Slightly Short: 001500

Language Settings

• America: [No barcode provided]
• Spain: [No barcode provided]
• Britain: [No barcode provided]
• Germany: [No barcode provided]
• Italy: [No barcode provided]
• France: [No barcode provided]
• Turkish-F: [No barcode provided]
• Canada: [No barcode provided]
• Turkish-Q: [No barcode provided]

Note: To apply a setting, scan the corresponding barcode from the physical manual or a printed version of the programming barcodes.

Maintenance

Cleaning the Scanner

To maintain optimal performance, keep the scanner's scanning window clean. Use a soft, lint-free cloth lightly dampened with water or a mild, non-abrasive cleaning solution. Avoid using harsh chemicals or abrasive materials that could scratch the window.

Storage

When not in use, store the scanner in a cool, dry place, away from direct sunlight and extreme temperatures. Protect the USB cable from kinks or damage.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the product packaging or contact Fangtek customer service directly. Contact details can typically be found on the manufacturer's official website or through your point of purchase.