1. Product Overview
The Relaxdays Toilet Butler is a freestanding toilet accessory set designed to provide convenient access to both toilet paper and a toilet brush. Its modern design, featuring a mix of shiny chrome and matte black, seamlessly integrates into various bathroom decors. This unit is freestanding, eliminating the need for drilling or permanent installation.
Image of the Relaxdays Toilet Butler, a freestanding unit with a toilet paper holder at the top and a toilet brush and container at the base. The unit features a black base and top tray, with chrome-plated vertical and horizontal bars.
2. Safety Information
- Ensure all components are securely fastened during assembly to prevent instability.
- Do not place excessively heavy objects on the top tray.
- Keep the toilet brush clean and replace the head regularly for hygiene.
- Keep out of reach of small children to prevent accidental injury.
- Avoid using abrasive cleaners that may damage the finish of the product.
3. Package Contents
Please check the package carefully to ensure all parts are present before beginning assembly.
- Toilet Butler components (main vertical pole, base, top tray, toilet paper holder bar, brush container)
- Toilet brush with handle and replaceable head
- Assembly hardware (screws, washers, Allen key if required)
- Assembly instructions (this manual)
4. Setup and Assembly
The Relaxdays Toilet Butler requires simple assembly. Follow these steps carefully:
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Attach the main vertical pole to the base using the provided screws and tools. Ensure it is firmly secured.
- Slide the toilet paper holder bar through the designated holes on the vertical pole and secure it.
- Attach the top tray to the upper part of the vertical pole, ensuring it is level and stable.
- Place the brush container into its designated slot on the base.
- Insert the toilet brush into the container.
- Once assembled, place the unit on a flat, stable surface in your desired bathroom location.
Close-up view of the Relaxdays Toilet Butler's top tray, designed to hold small items like a smartphone, and the sturdy black base. This image highlights the chrome finish of the support bars and the matte black finish of the tray and base, indicating key assembly areas.
5. Operating Instructions
- Toilet Paper Dispensing: Simply place a standard toilet paper roll onto the horizontal holder bar.
- Toilet Brush Use: Remove the toilet brush from its container for cleaning. After use, allow excess water to drip off before returning it to the container to maintain hygiene.
- Top Tray: The small tray at the top can be used to hold small personal items such as a smartphone or air freshener.
6. Maintenance and Care
- Cleaning the Unit: Wipe down the chrome and black surfaces with a soft, damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Dry thoroughly to prevent water spots.
- Cleaning the Brush Container: The brush container is removable for easy and hygienic cleaning. Simply lift it out, empty any liquid, wash with soap and water, disinfect if necessary, and dry completely before reinserting.
- Brush Head Replacement: For maximum hygiene, the toilet brush head is replaceable. When replacing, ensure the new head has a diameter of approximately 8 cm and an inner thread of about 9.5 mm. Relaxdays brush head model 10021025 is compatible.
Detailed image of the black toilet brush head, showing its bristles and the threaded connection point. This image is useful for identifying the correct replacement brush head.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit feels unstable or wobbly. | Loose assembly screws or uneven surface. | Tighten all assembly screws. Ensure the unit is placed on a flat, level surface. |
| Toilet paper holder bar slides out. | Not properly secured during assembly. | Re-insert the bar and ensure any securing mechanisms (e.g., small screws) are tightened. |
| Brush head appears worn or ineffective. | Normal wear and tear. | Replace the brush head with a compatible Relaxdays replacement (Model 10021025 or similar specifications). |
| Difficulty cleaning the brush container. | Accumulation of residue. | Remove the container from the base and wash thoroughly with soap and water. Disinfect as needed. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 10022547 |
| Brand | Relaxdays |
| Material | Steel (Chromed Iron, Iron, Plastic) |
| Color | Black-silver |
| Overall Dimensions (H x W x D) | Approx. 66.5 x 20 x 13.5 cm (26.18"L x 6.3"W x 5.31"H) |
| Base Dimensions (W x D) | Approx. 20 x 13.5 cm |
| Item Weight | Approx. 1.5 kg (3.3 lbs) |
| Special Feature | Removable brush container, Freestanding design, Top tray for small items |
| Brush Head Diameter | Approx. 8 cm |
| Brush Head Thread | Approx. 9.5 mm |
Diagram illustrating the dimensions of the Relaxdays Toilet Butler. The overall height is approximately 66.5 cm, the base width is 20 cm, and the base depth is 13.5 cm. This provides a clear visual reference for the product's size.
9. Warranty Information
Relaxdays products are manufactured with quality and durability in mind. For specific warranty terms and conditions, please refer to the purchase documentation or contact Relaxdays customer support directly. Keep your proof of purchase for any warranty claims.
10. Customer Support
If you have any questions, require assistance with assembly, or encounter any issues not covered in this manual, please contact Relaxdays customer support. Visit the official Relaxdays website for contact details and further product information.
Please note: Product specifications and design are subject to change without prior notice for continuous improvement.