HQRP Refrigerator Filter Instruction Manual

Introduction

This manual provides instructions for the installation, operation, and maintenance of your HQRP Refrigerator Filter. This filter is designed to reduce odors in your refrigerator and freezer, helping to maintain a fresh environment for your food.

Safety Information

• Always disconnect power to the refrigerator before attempting installation or replacement of any components.
• Keep the filter out of reach of children.
• Do not attempt to modify the filter.

Product Features

• Designed to eliminate foul odors from refrigerators and freezers.
• Reduces strong food odors from items like onions, garlic, fish, and spoiled foods.
• Helps prevent the buildup of odors, ensuring a fresh and clean refrigerator interior.
• Air actively passes through the filter to neutralize odors.
• Easy to install.

Image of the HQRP Refrigerator Filter, showcasing its pleated design and protective mesh.

Compatibility

This HQRP Refrigerator Filter is compatible with various Frigidaire, Electrolux, and Kenmore refrigerator models that use the PureAdvantage air filtration system.

Compatible with: Electrolux EAF1CB, Frigidaire AFCB, Kenmore 46-9917 / 9917.

Also fits Frigidaire Side-By-Side series including: GLHS66EJ, GLHS68EJ, GLHS69EH, GLHS69EJ, PHS68EJS, PHS69EHS, PHS69EJS, PHSB67EHS, PHSB67EJS, and many other specific models listed in the product description.

Installation Instructions

1. Locate the air filter compartment inside your refrigerator. This is typically found near the top or back of the fresh food section.
2. Open the filter compartment cover. Refer to your refrigerator's owner's manual if you have difficulty locating or opening it.
3. Remove the old air filter.
4. Insert the new HQRP Refrigerator Filter into the compartment, ensuring it is seated correctly.
5. Close the filter compartment cover securely.
6. Reset the filter indicator light on your refrigerator, if applicable. Consult your refrigerator's manual for specific instructions on resetting the indicator.

Image showing the HQRP Refrigerator Filter being inserted into the designated compartment inside a refrigerator.

Operation

Once installed, the HQRP Refrigerator Filter continuously works to circulate air through its activated carbon media, absorbing and neutralizing odors. No further action is required for its operation until replacement is due.

Maintenance and Replacement

For optimal performance and to ensure your refrigerator remains odor-free, replace the HQRP Refrigerator Filter every 6 months. Regular replacement prevents the filter from becoming saturated and losing its effectiveness.

Image illustrating a clean, fresh refrigerator interior, demonstrating the benefit of regular filter replacement. The filter is shown alongside.

Troubleshooting

Odors Persist After Installation

• Check Installation: Ensure the filter is correctly seated in its compartment and the cover is securely closed.
• Filter Age: If the filter has been in use for more than 6 months, it may be saturated and require replacement.
• Source of Odor: Verify that there are no spoiled food items or spills within the refrigerator that are causing the odors. Clean the refrigerator thoroughly if necessary.
• Refrigerator Settings: Ensure your refrigerator's temperature settings are appropriate for food storage.

Product Specifications

Image displaying the dimensions of the HQRP Refrigerator Filter: Length (L) 4-1/2 inches and Diameter (D) 2-3/8 inches.

Warranty Information

This HQRP Refrigerator Filter comes with a 2 weeks DOA (Dead On Arrival) replacement warranty. This warranty covers defects in materials or workmanship that prevent the product from functioning upon receipt. Please contact your retailer for warranty claims.

Support

For further assistance or inquiries regarding your HQRP Refrigerator Filter, please refer to the contact information provided by your retailer or visit the official HQRP website.