KAWADA Nanoblock NBH-166 Sights to See Farm Building Kit Instruction Manual

1. Introduction

Thank you for choosing the KAWADA Nanoblock NBH-166 Sights to See Farm Building Kit. Nanoblocks are miniature building blocks, with the smallest piece measuring just 4x4x5 mm. This kit allows you to construct a detailed farm scene, including a cow, a fence, a tree, and a Nanobbit figure. This manual provides essential information for assembly, maintenance, and safe use of your Nanoblock kit.

2. Safety Information

WARNING: CHOKING HAZARD - Small Parts. Not suitable for children under 3 years due to small parts that could be swallowed. Recommended for ages 12 and up.

• Keep all small parts away from young children and pets.
• Do not put blocks in your mouth.
• Dispose of packaging materials responsibly.

3. Package Contents

The Nanoblock NBH-166 Sights to See Farm Building Kit includes:

• Approximately 250 miniature building blocks.
• One Nanobbit figure.
• Instruction sheet (visual guide for assembly).

The Nanobbit figure included in the kit, wearing blue overalls.

4. Setup and Assembly

Follow these general guidelines for assembling your Nanoblock kit. Refer to the included visual instruction sheet for specific step-by-step diagrams.

1. Preparation: Unpack all components. It is recommended to sort the blocks by color and size to facilitate the building process. Due to their small size, use a clean, flat, and well-lit surface.
2. Follow Instructions: Carefully follow the visual instructions provided with your kit. Each step will show which blocks to use and where to place them.
3. Precision: Nanoblocks require precision due to their small size. Use gentle pressure to connect blocks. If a block is difficult to place, ensure it is correctly oriented.
4. Base Construction: Begin by building the base of the farm scene as indicated in the instructions. This provides a stable foundation for the rest of the model.
5. Layer by Layer: Nanoblock models are typically built layer by layer. Pay close attention to the color and placement of each block in every step.
6. Adding Details: Once the main structure is complete, add the smaller details like the cow, fence, tree, and the Nanobbit figure according to the instructions.

Completed Nanoblock Farm scene with a cow, fence, tree, and a Nanobbit figure.

Another view of the completed Nanoblock Farm, showing the detailed construction from a different angle.

Side view of the Nanoblock Farm, highlighting the cow and the green baseplate.

5. Operating (Building Process Tips)

The Nanoblock NBH-166 kit is rated Skill Level 2, suitable for beginners and experienced builders alike. Here are some tips for an enjoyable building experience:

• Patience is Key: Building with Nanoblocks requires patience and attention to detail. Take your time with each step.
• Use Tweezers (Optional): For very small or hard-to-reach blocks, a pair of fine-tipped tweezers can be helpful for precise placement.
• Check Your Work: Periodically review your progress against the instruction diagrams to ensure accuracy. Correcting mistakes early is easier than later.
• Educational Benefits: This kit helps develop concentration, dexterity, spatial reasoning, and color/shape recognition.

6. Maintenance

To keep your Nanoblock model in good condition:

• Cleaning: If the blocks or assembled model become dusty, gently wipe them with a soft, dry cloth. For more stubborn dirt, a slightly damp cloth can be used, but ensure no water gets trapped between blocks. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the assembled model or loose blocks in a clean, dry place away from direct sunlight and extreme temperatures to prevent discoloration or warping.
• Disassembly: If you wish to disassemble the model, do so carefully to avoid damaging the blocks. Use a block separator tool if available, or gently pry blocks apart.

7. Troubleshooting

Here are solutions to common issues you might encounter:

• Missing Pieces: Double-check all packaging and your work area. If a piece is genuinely missing, contact the retailer or manufacturer for assistance.
• Difficulty Connecting Blocks: Ensure the blocks are correctly aligned. Apply firm but gentle pressure. If a block seems too tight, try a different block of the same type, as manufacturing tolerances can vary slightly.
• Model Instability: Review previous steps to ensure all blocks are securely connected and placed according to the instructions. An unstable base can affect the entire model.
• Instructions Unclear: If a step in the visual instructions is unclear, try looking at the subsequent steps to understand the overall structure. Online communities or manufacturer websites may also offer additional support or clearer images.

8. Specifications

9. Warranty and Support

KAWADA products are manufactured to high-quality standards. Specific warranty information may vary by region and retailer. For any questions, missing parts, or support needs, please contact the retailer where you purchased the product or visit the official KAWADA Nanoblock website for customer service information.

Please retain your proof of purchase for any warranty claims.