Smith's Cordless Electric Knife and Tool Sharpener

Introduction

Thank you for choosing the Smith's Cordless Electric Knife and Tool Sharpener. This versatile and portable sharpening system is designed to provide a sharp edge for a wide variety of knives and tools. Featuring a powerful rechargeable lithium-ion battery, adjustable angle guides, and replaceable abrasive belts, this sharpener offers convenience and precision for all your sharpening needs. Please read this manual thoroughly before operation to ensure safe and effective use of your sharpener.

Safety Information

WARNING: Always exercise extreme caution when handling sharp objects and operating sharpening equipment. Failure to follow these safety instructions may result in serious injury.

• Read all instructions before using the sharpener.
• Keep hands and fingers away from the abrasive belt during operation.
• Wear appropriate eye protection (safety glasses) when sharpening.
• Ensure the work area is well-lit and clear of obstructions.
• Do not immerse the sharpener in water or other liquids.
• Do not attempt to sharpen serrated blades or scissors with this device.
• Keep out of reach of children.
• Use only the provided charging plug and approved replacement belts.
• Disconnect the sharpener from the charger before cleaning or performing maintenance.

Setup

Package Contents

Upon opening your package, verify that all components are present:

• Smith's Cordless Electric Knife and Tool Sharpener
• Canvas Storage Bag
• Charging Plug (Power Supply)
• 9 Replaceable Abrasive Belts (3 Coarse, 3 Medium, 3 Fine)

Image: The Smith's Cordless Electric Knife and Tool Sharpener, its yellow canvas storage bag, charging adapter, and a set of abrasive belts.

Charging the Battery

The sharpener is powered by a rechargeable lithium-ion battery. For optimal performance, fully charge the battery before first use.

1. Locate the charging port on the sharpener.
2. Connect the charging plug to the sharpener's charging port.
3. Plug the charging adapter into a standard electrical outlet.
4. The charging indicator light will illuminate (refer to product for specific light behavior, e.g., red for charging, off for fully charged).
5. A full charge typically takes less than one hour, providing approximately 15 minutes of continuous runtime.

Installing/Replacing Abrasive Belts

The sharpener comes with three types of abrasive belts: Coarse (80 Grit), Medium (240 Grit), and Fine (600 Grit). Choose the appropriate grit for your sharpening task.

Image: A stack of three abrasive belts, demonstrating the different grit textures.

1. Ensure the sharpener is turned off and disconnected from the charger.
2. Locate the belt tension release mechanism (usually a lever or button).
3. Release the tension and carefully remove the old belt, if applicable.
4. Position the new belt around the rollers, ensuring it is centered and aligned.
5. Engage the belt tension mechanism to secure the belt firmly in place.
6. Gently rotate the belt by hand to confirm it moves freely and is properly seated.

Image: A detailed view of the sharpener's head, illustrating the belt path and internal components.

Operating Instructions

General Sharpening Principles

• Always start with the Coarse grit belt for dull or damaged edges, then progress to Medium, and finish with Fine for a polished edge.
• Apply light, consistent pressure. Excessive pressure can generate heat and damage the blade.
• Maintain a slow, controlled pass through the sharpening guides.
• Ensure the entire length of the blade edge makes contact with the abrasive belt.

Using the Adjustable Angle Guide

The sharpener features an adjustable angle guide that can be set to 15, 20, 25, or 30 degrees to accommodate various blade types. The guide is also removable if not needed for certain tools.

1. Identify the desired sharpening angle for your knife or tool.
2. Adjust the guide to the corresponding angle setting.
3. Ensure the guide is securely locked in place before sharpening.

Sharpening Knives

1. Select the appropriate grit belt and angle setting.
2. Turn on the sharpener.
3. Place the heel of the knife blade into the sharpening guide slot.
4. With light, consistent pressure, pull the knife slowly through the slot towards the tip, ensuring the entire edge passes over the belt.
5. Repeat on the opposite side of the blade. Alternate sides with each pass.
6. Continue until a burr forms along the edge.
7. Progress to finer grit belts, reducing the number of passes on each side.
8. Finish with the Fine grit belt for a razor-sharp edge.

Image: A user demonstrating how to sharpen a knife using the Smith's Cordless Electric Knife and Tool Sharpener, holding the knife firmly against the guide.

Sharpening Tools

The sharpener's rotating head allows for sharpening various tools that may not fit into the angle guide, such as shovels, axes, or lawnmower blades.

1. Remove the angle guide if it obstructs the tool.
2. Select the appropriate grit belt.
3. Turn on the sharpener.
4. Carefully bring the edge of the tool into contact with the moving abrasive belt, maintaining a consistent angle.
5. Move the tool along the belt to sharpen the entire edge.
6. Repeat on the opposite side if the tool has a double bevel.
7. Exercise extreme caution to avoid contact with the moving belt.

Image: A user sharpening a shovel with the Smith's Cordless Electric Knife and Tool Sharpener, highlighting its capability for larger tools.

Maintenance

Cleaning the Sharpener

• Always ensure the sharpener is turned off and unplugged before cleaning.
• Use a dry cloth or a soft brush to remove metal shavings and dust from the sharpener's body and belt area.
• Do not use water or abrasive cleaners.

Belt Replacement

Abrasive belts will wear out over time and should be replaced when they no longer effectively sharpen. Refer to the "Installing/Replacing Abrasive Belts" section under Setup for detailed instructions.

Battery Care

• Store the sharpener in a cool, dry place.
• Avoid fully discharging the battery frequently. Recharge when the performance noticeably decreases.
• If storing for an extended period, charge the battery to approximately 50% capacity.

Troubleshooting

Specifications

• Model: 50969
• Brand: Smith's
• Material: Acrylonitrile Butadiene Styrene
• Color: Multicolor (Yellow/Gray)
• Product Dimensions: 9.45"L x 5.12"W x 5.75"H
• Item Weight: 1.76 Pounds
• Grit Types Included: Coarse (80), Medium (240), Fine (600)
• Battery Type: Lithium Ion (included)
• Continuous Runtime: Approximately 15 minutes
• Charge Time: Under 1 hour
• Included Components: Cordless knife and tool sharpener, Smith's bag, 9 belts, power supply
• UPC: 027925509692

Image: Dimensional view of the sharpener, indicating its length, width, and height.

Warranty and Support

Warranty Information

Specific warranty details for the Smith's 50969 Cordless Electric Knife and Tool Sharpener are not provided within this manual. Please refer to the product packaging or the official Smith's website for the most current warranty policy and registration information.

Customer Support

For technical assistance, replacement parts, or any questions regarding your Smith's product, please visit the official Smith's website or contact their customer service department. Contact information can typically be found on the manufacturer's website or product packaging.

You can visit the Smith's store online at: Smith's Store on Amazon