1. Introduction
This manual provides essential information for the safe and effective use of your EPtech 6FT AC Power Cord. This power cord is designed as a replacement or spare for various Ion Block Rocker Bluetooth speaker models, including iPA56, iPA56B, iPA56C, iPA56D, and iPA56S. Please read this manual thoroughly before use.
Figure 1: EPtech 6FT AC Power Cord. This image displays the black power cord with a standard 3-prong male plug on one end and a female IEC C13 connector on the other, designed for compatible electronic devices.
2. Product Features
- High Quality Construction: 100% Brand New, high quality AC power cord.
- Standard Compatibility: Features a 3-prong USA standard power cable design.
- Optimal Length: Cable length of 6 feet (approximately 1.8 meters) for flexible placement.
- Advanced Safety Features: Includes Over Current Protection, Total Power Protection, Over Voltage Protection, and Short Circuit Protection to ensure safe operation.
- Certified Quality: Manufactured with the highest quality materials and certified by FCC, CE, and RoHS standards.
Figure 2: High Quality Power Cable Design. This diagram illustrates the internal components of the power cable, highlighting the high-quality copper wire conductors and the durable PVC insulation jacket, ensuring reliable power transmission.
Figure 3: Safety Design with Multiple Protections. This image showcases the various safety features integrated into the power cord's design, including protection against over-temperature, over-voltage, over-current, and short circuits, ensuring user and device safety.
3. Setup
The EPtech AC Power Cord is designed for simple plug-and-play operation.
- Identify Compatible Device: Ensure your device (e.g., Ion Block Rocker Bluetooth speaker) requires a 3-prong IEC C13 power cord.
- Connect to Device: Insert the female end (IEC C13 connector) of the EPtech power cord firmly into the power input port of your compatible device.
- Connect to Power Outlet: Insert the male 3-prong plug into a standard USA 120V AC wall outlet.
- Verify Connection: Ensure both ends of the cord are securely connected before powering on your device.
4. Operating Instructions
Once the power cord is correctly connected, your device should receive power. The power cord itself does not require any specific operational steps beyond proper connection.
- Ensure the power outlet is active.
- Turn on your device using its power switch.
- If the device does not power on, check all connections and the power outlet.
5. Maintenance
Proper care and maintenance will extend the life of your power cord.
- Storage: When not in use, coil the cord loosely. Avoid tight coiling or kinking, which can damage the internal wires.
- Cleaning: Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or immerse the cord in water.
- Inspection: Periodically inspect the cord for any signs of damage, such as cuts, fraying, or exposed wires. Discontinue use immediately if damage is found.
- Environment: Keep the cord away from extreme temperatures, direct sunlight, and moisture.
Figure 4: Durable & Compact Design. This image highlights the robust construction and compact form factor, emphasizing the product's durability and suitability for various environments, including home, office, and travel.
6. Troubleshooting
If you encounter issues with your power cord, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Loose connection, faulty outlet, damaged cord. | Ensure both ends of the cord are securely plugged in. Test the outlet with another device. Inspect the cord for visible damage; if damaged, replace it. |
| Cord feels hot during use. | Overload, internal damage. | Unplug immediately. Ensure the device's power requirements do not exceed the cord's capacity. If the issue persists, discontinue use and replace the cord. |
| Intermittent power to device. | Loose connection, internal wire damage. | Check connections. If the problem continues, the cord may have internal damage and should be replaced. |
7. Specifications
| Attribute | Value |
|---|---|
| Brand | EPtech |
| Model Number | CAB180324123 |
| Cable Length | 6 feet (1.8 meters) |
| Connector Type (Male) | 3-prong USA Standard (Type B) |
| Connector Type (Female) | IEC C13 |
| Item Weight | 8 ounces |
| Certifications | FCC, CE, RoHS |
| Safety Features | Over Current Protection, Total Power Protection, Over Voltage Protection, Short Circuit Protection |
8. Warranty and Support
For information regarding warranty coverage and customer support, please refer to the product packaging or the seller's terms of sale. EPtech products are manufactured with quality in mind, and customer satisfaction is a priority.
If you have any questions or require assistance, please contact EPtech customer service: