1. Product Overview
The BOSCH Universal Aquatak 130 is a high-pressure washer designed for efficient cleaning of various surfaces. Equipped with a 1700W motor and a maximum pressure of 130 bar, it effectively removes dirt, grime, and mud from cars, patios, driveways, and outdoor furniture. Its compact and portable design, weighing 7.9 kg, includes wheels and an additional handle for easy maneuverability and storage. The integrated Auto-Stop system contributes to energy efficiency and reduced water consumption.
Image 1.1: The BOSCH Universal Aquatak 130 High-Pressure Washer, showcasing its compact design and integrated hose/gun storage.
2. Safety Information
WARNING: Pressure washers can be powerful and dangerous if not handled carefully. Always prioritize safety by wearing appropriate protective gear, keeping a safe distance, and never pointing the nozzle at people, animals, or yourself.
This appliance is intended for domestic use only. Do not use for commercial or industrial purposes.
Image 2.1: Sticker indicating the product is for domestic use only.
3. Product Components
The package for your BOSCH Universal Aquatak 130 High-Pressure Washer typically contains the following items:
- BOSCH Universal Aquatak 130 Main Unit
- Water Filter
- 1x BOSCH 360° High Pressure Gun
- 1x High Pressure Detergent Nozzle (450ml capacity)
- 6-meter High-Pressure Hose
- 1x 3-in-1 Nozzle (Rotary, Fan-Jet, Pencil Jet)
- 1x Lance
Image 3.1: Included accessories: high-pressure gun, hose, 3-in-1 nozzle, and detergent bottle.
4. Assembly and Initial Setup
- Unpack Components: Carefully remove all items from the packaging and ensure all listed components are present.
- Attach Handle: If the handle is not pre-assembled, slide it into the designated slots on the main unit until it clicks securely into place.
- Connect High-Pressure Hose: Connect one end of the 6-meter high-pressure hose to the outlet on the pressure washer unit and the other end to the high-pressure gun. Ensure connections are tight to prevent leaks.
- Connect Water Supply: Attach a garden hose (not included) to the water inlet on the pressure washer. Ensure the water filter is properly installed at the inlet. Connect the other end of the garden hose to a water tap.
- Connect Power: Plug the power cord into a suitable grounded electrical outlet (240V).
- Prime the Pump: Before switching on the unit, turn on the water tap completely. Squeeze the trigger on the high-pressure gun to allow water to flow through the system and expel any air. Continue until a steady stream of water emerges from the nozzle. This primes the pump and prevents damage.
5. Operating Instructions
5.1 General Operation
- Ensure the unit is properly set up and primed as described in Section 4.
- Turn on the main power switch on the pressure washer unit. The motor will start briefly and then stop, indicating it is ready (Auto-Stop function).
- Point the nozzle at the surface to be cleaned, maintaining a safe distance.
- Squeeze the trigger on the high-pressure gun to start the water flow. Release the trigger to stop the flow.
- After use, turn off the power switch, turn off the water tap, and squeeze the trigger to release any remaining pressure before disconnecting hoses.
5.2 Using the 3-in-1 Nozzle
The Universal Aquatak 130 features a versatile 3-in-1 nozzle, allowing you to switch between different spray patterns for various cleaning tasks:
- Rotary Jet: Provides a powerful, rotating jet for stubborn dirt and grime on hard surfaces like concrete and paving.
- Fan-Jet: Delivers a wide, flat spray suitable for general cleaning of larger areas, such as vehicles, walls, and garden furniture.
- Pencil Jet: A concentrated, high-impact stream for precise cleaning of very small, tough spots. Use with caution due to its intensity.
To change the spray pattern, simply twist the nozzle head on the lance until the desired pattern is selected.
5.3 Using the High-Pressure Detergent System
The integrated 450ml high-pressure detergent system allows for quick and even application of cleaning solutions.
- Fill the detergent bottle with an appropriate pressure washer detergent. Do not use solvents or flammable liquids.
- Attach the detergent bottle to the designated port on the pressure washer unit.
- Ensure the 3-in-1 nozzle is set to the low-pressure detergent setting (if available, or use the dedicated detergent nozzle if separate).
- Operate the pressure washer as usual. The detergent will be mixed with the water and applied to the surface.
- After applying detergent, switch back to a high-pressure setting (e.g., Fan-Jet) to rinse the surface thoroughly.
- Clean the detergent bottle and nozzle after each use to prevent clogging.
Image 5.1: The pressure washer unit with the high-pressure detergent bottle attached.
6. Usage Guidelines
The Bosch Aquatak range is intended for domestic use only around the home and is not intended for commercial use. The following table provides guidance on suitable cleaning applications based on pressure requirements:
Image 6.1: Guide for selecting the right pressure washer based on cleaning application and pressure levels.
7. Maintenance and Storage
- Cleaning: After each use, rinse the high-pressure gun, lance, and nozzles with clean water. Wipe down the main unit with a damp cloth.
- Water Filter: Regularly check and clean the water filter at the inlet to prevent debris from entering the pump.
- Hose and Cord: Inspect the high-pressure hose and power cord for any signs of damage, kinks, or wear before and after each use. Replace damaged components immediately.
- Winterization (for cold climates): If storing in an area where temperatures may drop below freezing, drain all water from the pump, hoses, and accessories to prevent damage from freezing. Run a non-toxic antifreeze solution through the pump if recommended by the manufacturer.
- Storage: Store the pressure washer in a dry, frost-free location. Utilize the integrated storage for the hose, gun, and lance to keep components organized and protected.
8. Troubleshooting
Refer to the table below for common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not start | No power supply; Faulty power switch; Thermal overload activated | Check power connection and outlet; Ensure switch is ON; Allow unit to cool down |
| No pressure or low pressure | Insufficient water supply; Air in pump; Clogged nozzle; Water filter blocked | Ensure water tap is fully open; Prime the pump (Section 4.6); Clean nozzle; Clean water filter |
| Water leaks from connections | Loose connections; Damaged O-rings/seals | Tighten all connections; Inspect and replace damaged O-rings/seals |
| Detergent not dispensing | Detergent bottle empty; Nozzle not set to detergent mode; Detergent nozzle clogged | Refill detergent bottle; Adjust nozzle setting; Clean detergent nozzle |
9. Technical Specifications
| Specification | Value |
|---|---|
| Brand | Bosch |
| Model | Aquatak 130 |
| Power Source | Corded Electric |
| Motor Wattage | 1700 W |
| Voltage | 240 Volts |
| Maximum Pressure | 130 Bar |
| Maximum Flow Rate | 380 Liters Per Hour |
| Hose Length | 6 Metres |
| Cable Length | 5 Metres |
| Item Weight | 7.9 kg (approx. 7000 Grams) |
| Product Dimensions (L x W x H) | 14.4L x 14.2W x 17.3H Centimeters |
| Tank Volume (Detergent) | 450 Millilitres |
| Material | Plastic |
| Country of Origin | China |
10. Warranty and Customer Support
For warranty information, service, or technical assistance, please contact Bosch customer support:
- Manufacturer/Importer: Bosch Ltd., Post Box No: 3000, Hosur Road, Adugodi, Bangalore - 560030, India
- Customer Care Number: 18004258665
Please have your product model number (Aquatak 130) and serial number ready when contacting support.
