Beileshi 81000M

Beileshi Headband Lighted Magnifying Glasses with LED Light (Model 81000M) Instruction Manual

Introduction

This manual provides instructions for the Beileshi Headband Lighted Magnifying Glasses, Model 81000M. This device is designed to assist with close-up tasks requiring magnification and illumination. It features multiple interchangeable lenses and an adjustable LED light, making it suitable for various applications such as reading, crafting, electronic repair, and jewelry work.

Product Components

The Beileshi Headband Lighted Magnifying Glasses include the following main components:

  • Headband with integrated LED light unit
  • Fixed 8X auxiliary lens
  • Five interchangeable main lenses: 1.0X, 1.5X, 2.0X, 2.5X, 3.5X
  • Battery compartment (for 3 AAA batteries, not included)
  • Headband adjustment knob
  • Lens storage case
  • Cleaning cloth
Detailed diagram of the Beileshi headband magnifier, labeling key components such as the headband, battery compartment, power switch, LED light, small auxiliary lens, back lens, front lens, sponge lining, and headband regulating wheel. Also includes a comparison table of lens magnification and focal lengths.
Diagram of Beileshi Headband Magnifier Components

Setup

1. Battery Installation

The LED light requires 3 AAA batteries. To install:

  1. Locate the battery compartment on the top of the headband unit.
  2. Open the battery compartment cover.
  3. Insert three AAA batteries, ensuring correct polarity (+/-). A ribbon is provided in the compartment to aid in battery removal.
  4. Close the battery compartment cover securely.
Instructions for power supply installation in the Beileshi headband magnifier, showing how to insert three AAA batteries into the compartment and use the rope for easy removal.
Battery Installation Steps

2. Headband Adjustment

Adjust the headband for a comfortable and secure fit:

  1. Pull out the knob located at the back of the headband.
  2. Rotate the knob left or right to adjust the headband size until it fits comfortably around your head.
  3. Press the knob back in to lock the headband size.
  4. The entire lighting frame can be tilted upwards or downwards by rotating the side knobs counter-clockwise to release, adjust, and then clockwise to lock.
Step-by-step guide on how to adjust the headband size of the Beileshi magnifier: 1. Pull out the knob, 2. Rotate to adjust headband size, 3. Press the knob to fix the size. Also shows how the head position can be adjusted by the entire set.
Headband Size and Angle Adjustment

3. Lens Installation

The magnifier features two lens slots for interchangeable lenses and one fixed 8X auxiliary lens.

  1. Select the desired interchangeable lens(es) (1.0X, 1.5X, 2.0X, 2.5X, 3.5X) from the provided set.
  2. Slide the chosen lens(es) into the front or back lens slots until they click into place. You can use one or two lenses simultaneously in these slots.
  3. The fixed 8X auxiliary lens can be flipped down for additional magnification as needed.
Image showing the Beileshi headband magnifier with its five interchangeable lenses (1.0X, 1.5X, 2.0X, 2.5X, 3.5X) and the fixed 8X lens, illustrating how they are inserted into the dual lens slots.
Interchangeable Lens System

Operating Instructions

1. Changing Magnification

The device offers 23 magnification combinations by utilizing the fixed 8X lens and the five interchangeable lenses (1.0X, 1.5X, 2.0X, 2.5X, 3.5X) in the dual slots. You can combine lenses to achieve higher magnifications. For example, inserting a 2.5X lens and a 3.5X lens, along with the fixed 8X lens, can provide a combined magnification.

Refer to the table below for common magnification and focal length combinations:

Detailed diagram of the Beileshi headband magnifier, labeling key components such as the headband, battery compartment, power switch, LED light, small auxiliary lens, back lens, front lens, sponge lining, and headband regulating wheel. Also includes a comparison table of lens magnification and focal lengths.
Magnification and Focal Length Table (part of diagram)

2. LED Light Operation

The integrated LED light provides illumination for your work area:

  1. Press the power switch on the LED unit to cycle through brightness settings: Off > Low Brightness > High Brightness > Off.
  2. The angle of the LED light can be adjusted by tilting the light unit up or down to direct illumination precisely onto your task.
Comparison images showing the two brightness levels of the LED light on the Beileshi headband magnifier: soft light and strong light, along with a depiction of the battery compartment and required AAA batteries.
LED Light Brightness Settings

3. Folding Lenses

When not in use, the lenses can be folded up and retracted to prevent obstruction or damage.

Diagram illustrating the adjustable features of the Beileshi headband magnifier, including the LED light source angle, foldable and retractable lenses, double lens orbit, and comfortable soft-cushioned headband.
Foldable Lens Mechanism

4. Wearing with Eyeglasses

The Beileshi Headband Magnifying Glasses are designed to be worn comfortably over most prescription eyeglasses, allowing users to combine their corrective vision with magnification.

An individual wearing the Beileshi headband magnifier over their prescription glasses while performing close-up work, demonstrating its compatibility.
Wearing the Magnifier Over Eyeglasses

Maintenance

1. Cleaning

To maintain optical clarity and device longevity:

  • Use the provided cleaning cloth or a soft, lint-free cloth to gently wipe the lenses.
  • For stubborn smudges, lightly dampen the cloth with lens cleaning solution or water. Avoid harsh chemicals.
  • Clean the headband and body with a soft, dry cloth.

2. Storage

Store the magnifying glasses in a clean, dry place, preferably in the provided lens storage case, to protect the lenses from scratches and dust.

Troubleshooting

  • LED Light is Dim or Not Working: Check if the AAA batteries are correctly installed and have sufficient charge. Replace batteries if necessary.
  • Vision is Unclear or Blurry: Ensure the lenses are clean. Adjust the distance between your eyes and the object being viewed to find the optimal focal length for the selected magnification. Verify that the correct lens combination is used for your task.
  • Magnifier Feels Uncomfortable or Loose: Re-adjust the headband size using the rear knob until a snug and comfortable fit is achieved. Ensure the side knobs are tightened after adjusting the angle.

Specifications

  • Brand: Beileshi
  • Model Number: 81000M
  • Magnification Strength: 1.0X to 14.0X (via interchangeable and fixed lenses)
  • Lens Material: Glass
  • Power Source: 3 x AAA batteries (for LED light)
  • Item Weight: Approximately 0.63 Kilograms (1.38 pounds)
  • Product Dimensions: 11.5"L x 8.46"W
  • Color: White

Safety Information

  • Do not look directly at the sun or other strong light sources through the lenses, as this can cause permanent eye damage.
  • Keep the device out of reach of children to prevent misuse or accidental damage.
  • Avoid dropping the device or subjecting it to strong impacts, which may damage the lenses or internal components.
  • Dispose of used batteries responsibly according to local regulations.

Warranty and Support

For any questions regarding the use of this product, or if you encounter quality problems, please contact Beileshi customer support. We are committed to resolving any issues and ensuring your satisfaction, including providing replacements for products with quality defects.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.