KoluaWax Waxing Kit Hair Removal - SGWKIT Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your KoluaWax Waxing Kit. Please read all instructions carefully before first use to ensure optimal results and prevent injury.

Package Contents

Your KoluaWax Waxing Kit includes the following items:

• Digital Wax Warmer
• Removable Silicone Wax Pot
• Pre-Wax Oil
• Post-Wax Oil
• Applicator Sticks (various sizes)
• How-To Guide
• 4 Bags of Wax Beads (Coarse Hair, Brows & Face, Legs & Back, and All Hair Types)

Image: Contents of the KoluaWax Waxing Kit, showing the digital wax warmer, pink silicone pot, pre-wax and post-wax oils, four bags of wax beads, and various applicator sticks.

Safety Information

Please observe the following safety precautions:

• The digital wax warmer features precise temperature control to prevent burns. Always monitor the temperature display.
• Ensure hair is at least 1/4 inch long for proper waxing.
• Do not apply wax that is too hot. The wax should have the consistency of honey.
• Exfoliate skin 24-48 hours before waxing.
• Always perform a patch test on a small area of skin before full application to check for adverse reactions.
• Keep out of reach of children.
• Do not use on irritated, broken, or sunburned skin.

Setup

1. Unpack the Kit: Carefully remove all components from the packaging.
2. Place the Warmer: Position the digital wax warmer on a stable, heat-resistant surface.
3. Insert Silicone Pot: Place the removable silicone wax pot inside the warmer.
4. Add Wax Beads: Pour your desired KoluaWax beads into the silicone pot.
5. Connect Power: Plug the warmer into a suitable electrical outlet.

Operating Instructions

1. Melt Wax:

   Turn on the wax warmer and set the temperature. Heat the wax beads until they are fully melted and have a smooth, honey-like consistency. The digital display will show the current temperature. For optimal results, the wax should be hot enough to spread easily but not so hot that it causes discomfort or burns.

   

   Image: The KoluaWax digital wax warmer with pink wax beads melting inside the silicone pot, displaying a temperature of 150 degrees.

2. Prepare Skin:

   Cleanse the area to be waxed with the provided Pre-Wax Oil. Ensure the skin is completely dry before applying wax. Applying a fine layer of baby powder or cornstarch can help the wax adhere better to hair and less to skin, especially for sensitive areas.

3. Apply Wax:

   Using an applicator stick, spread a layer of wax in the direction of hair growth. Apply with firm pressure to ensure the wax adheres to the hair. The wax layer should be thick, similar to a banana peel, to allow for easy removal.

   

   Image: A person applying melted pink wax to their leg using a wooden applicator stick, demonstrating the application process.

4. Remove Wax:

   Wait approximately 30-60 seconds for the wax to harden. Once hardened, hold the skin taut with one hand and quickly pull the wax strip off in the opposite direction of hair growth with the other hand. Pull parallel to the skin, not upwards.

5. Soothe Skin:

   After waxing, apply the Post-Wax Oil to calm and refresh the skin, and to remove any wax residue. This oil also helps to moisturize the skin.

Maintenance

• Cleaning the Silicone Pot:

  Allow any remaining wax in the silicone pot to cool and harden completely. Once hardened, the wax can be easily popped out of the non-stick silicone pot. Wash the silicone pot with soap and water. This makes it reusable and easy to clean.

  

  Image: A four-panel image illustrating the easy cleaning process of the silicone wax pot: letting the wax cool, popping it out, washing with soap and water, and storing it.

• Cleaning the Warmer: Wipe the exterior of the wax warmer with a damp cloth. Do not immerse the warmer in water.
• Storage: Store the waxing kit in a cool, dry place away from direct sunlight.

Troubleshooting

Specifications

• Model Number: SGWKIT
• UPC: 860052000522
• Brand: KoluaWax
• Item Form: Wax
• Skin Type: All, Sensitive
• Product Benefits: Hair Removal
• Target Use Body Part: Face, Bikini, Eyebrow, Legs
• Scent Name: Unscented (for the warmer, wax beads have specific scents)
• Material Features: Dermatologist Tested, Gluten Free, Not Tested On Animals, Vegan
• Material Type Free: Alcohol Free, Aluminum Free, Formaldehyde Free, Paraben Free, Phthalate Free, Sodium Lauryl Sulfate Free, Sulfate Free
• Package Dimensions: 8.11 x 8.01 x 6.54 inches
• Item Weight: 2.98 pounds

Warranty and Support

For warranty information or product support, please refer to the official KoluaWax website or contact their customer service directly. The product typically includes a 30-day refund/replacement return policy through the retailer.

Manufacturer: KoluaWax

Brand Store: KoluaWax Amazon Store