1. Overview
This manual provides instructions for the Feit Electric A19 LED Light Bulbs, model A800/830/10KLED/10/RP. These bulbs are designed to offer energy-efficient lighting for various residential and commercial applications. They provide 800 lumens of 2700K Soft White light, equivalent to a standard 60-watt incandescent bulb, while consuming only 10 watts of power.
Key Features:
- Energy Saving: Replaces 60W incandescent bulbs with 10W LED, offering up to 83% energy savings.
- Long Lasting: Designed for an average life of 11,000 hours (approximately 10 years), reducing the frequency of bulb replacements.
- Soft White Light: Produces a 2700K color temperature, ideal for creating a warm and inviting atmosphere.
- Instant On: Provides full brightness immediately upon activation, with no warm-up time.
- Quality and Safety: UL listed and FCC compliant, ensuring high standards for performance and safety.
Figure 1: Feit Electric A19 LED Light Bulbs (10-pack packaging).
2. Safety Information
Please read and understand all safety instructions before installing or using these LED bulbs. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Risk of Electric Shock: Always turn off the power to the fixture before inspecting, installing, or removing the bulb.
- Non-Dimmable: These bulbs are NOT designed for use with dimmers. Using them with a dimmer switch may cause flickering, damage to the bulb, or premature failure.
- Suitable for Damp Locations: These bulbs are suitable for use in damp locations, but not for direct exposure to water.
- Operating Temperature: Do not use in totally enclosed luminaires unless the fixture is specifically designed for LED bulbs. Excessive heat can shorten bulb life.
- Mercury-Free: These bulbs are 100% mercury-free.
- UL Listed: This product is UL listed, indicating compliance with safety standards.
3. Setup and Installation
Installation of the Feit Electric A19 LED Light Bulb is straightforward. Ensure the power is off before proceeding.
- Turn Off Power: Locate the light switch or circuit breaker controlling the fixture and turn off the power.
- Remove Old Bulb: Carefully unscrew the existing light bulb from the fixture. Allow it to cool if it has been recently in use.
- Install New Bulb: Screw the Feit Electric A19 LED bulb into the standard E26 medium base socket. Turn clockwise until it is finger-tight. Do not overtighten.
- Restore Power: Turn the power back on at the switch or circuit breaker.
- Test: Turn on the light switch to ensure the bulb is functioning correctly.
Figure 2: A19 LED Bulb dimensions and base type (E26 Medium).
4. Operation
The Feit Electric A19 LED Light Bulb operates like a standard light bulb. Once installed and power is restored, simply use the wall switch or fixture switch to turn the light on or off.
- Instant Brightness: The bulb will illuminate to full brightness immediately without any delay.
- Light Output: Provides 800 lumens of light, suitable for general room illumination.
- Color Temperature: Emits a 2700K Soft White light, creating a warm and comfortable ambiance.
- Non-Dimmable: This bulb is not compatible with dimmer switches. Ensure it is used in a non-dimmable circuit.
Figure 3: Illustration of the bulb's light output in a room setting.
5. Maintenance
Feit Electric A19 LED Light Bulbs require minimal maintenance due to their long lifespan and durable design.
- Cleaning: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- No User-Serviceable Parts: The bulb contains no user-serviceable parts. Do not attempt to open or repair the bulb.
- Disposal: Dispose of old bulbs according to local regulations for electronic waste.
6. Troubleshooting
If you encounter issues with your Feit Electric A19 LED Light Bulb, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture, loose connection, or faulty bulb. | Check if the light switch is on. Ensure the bulb is securely screwed into the socket. Check the circuit breaker. If issues persist, replace the bulb. |
| Bulb flickers. | Incompatible dimmer switch or unstable power supply. | Ensure the bulb is not connected to a dimmer switch, as it is non-dimmable. Check for loose wiring in the fixture. |
| Bulb is too dim. | Incorrect bulb for desired brightness. | Verify the bulb's lumen output (800 lumens for this model) meets your lighting needs. |
Figure 4: Feit Electric LED bulbs are designed for flicker-free operation in compatible fixtures.
7. Specifications
Detailed technical specifications for the Feit Electric A19 LED Light Bulb (Model: A800/830/10KLED/10/RP):
| Specification | Value |
|---|---|
| Model Number | A800/830/10KLED/10/RP |
| Bulb Shape Size | A19 |
| Bulb Base | E26 Medium |
| Light Type | LED |
| Wattage | 10 Watts |
| Incandescent Equivalent | 60 Watts |
| Brightness | 800 Lumens |
| Light Color | 2700K Soft White |
| Color Rendering Index (CRI) | 80 |
| Voltage | 110-120 Volts |
| Average Life | 11,000 Hours / 10 Years |
| Special Features | Non Dimmable, Mercury Free, Instant On, UL Listed, FCC Compliant |
| Indoor/Outdoor Usage | Indoor, Outdoor (Suitable for Damp Locations) |
| Material | Plastic |
| Product Dimensions | 2.35"W x 4.4"H |
Figure 5: Feit Electric A19 LED Light Bulb.
8. Warranty and Support
Warranty Information:
This product is covered by the warranty as labelled on the product packaging. Please refer to the packaging for specific warranty terms and conditions.
Customer Support:
For 24/7 customer support, frequently asked questions, and additional resources, please visit the Feit Electric help center:
Visit Feit Electric Help Center
Figure 6: Feit Electric customer support information.
