OMNI5 MK2416-03
OMNI5 K2416 Engine & Transmission Mount Set User Manual
Compatible with 1990-1997 Ford Ranger 2.3L
Product Overview
The OMNI5 K2416 Engine and Transmission Mount Set is designed to provide stable support for your vehicle's engine and transmission, reducing vibrations and ensuring proper alignment. This set includes two engine mounts and one transmission mount, specifically engineered for compatibility with 1990-1997 Ford Ranger models equipped with a 2.3L engine.
Figure 1: Complete OMNI5 K2416 Engine and Transmission Mount Set. This image displays all three components included in the set: two engine mounts and one transmission mount, ready for installation.
Compatibility
This mount set is compatible with the following vehicle specifications:
- Vehicle: Ford Ranger
- Model Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
- Engine Size: 2.3L
For precise fitment, always verify compatibility with your vehicle's VIN number or consult the manufacturer's fitment guide.
Components Included
The K2416 set includes the following components:
- 2x Engine Mounts: Interchange Number A2698, Other Number EM2698
- 1x Transmission Mount: Interchange Number A2639, Other Number EM2639
Figure 2: OMNI5 Engine Mount (A2698). This image shows a single engine mount, characterized by its cylindrical rubber body and metal mounting studs.
Figure 3: OMNI5 Transmission Mount (A2639). This image displays the transmission mount, featuring a rectangular metal bracket with rubber dampening and mounting points.
Installation Guidelines
Installation of engine and transmission mounts typically requires specialized tools and automotive knowledge. It is highly recommended that installation be performed by a certified mechanic or an experienced automotive technician. Improper installation can lead to vehicle damage or safety hazards.
General Steps (Consult Service Manual for Specifics):
- Safety First: Ensure the vehicle is securely lifted and supported on jack stands. Disconnect the battery.
- Support Engine/Transmission: Use a suitable engine hoist or transmission jack to support the engine and/or transmission before removing mounts.
- Remove Old Mounts: Carefully unbolt and remove the old engine and transmission mounts. Note their orientation.
- Install New Mounts: Position the new OMNI5 mounts in their correct locations. Ensure all bolts are aligned and hand-tightened before final torque.
- Torque Bolts: Refer to your vehicle's service manual for the correct torque specifications for all mounting bolts.
- Lower Vehicle: Slowly lower the engine/transmission onto the new mounts.
- Final Checks: Reconnect the battery. Inspect all connections and ensure no tools or debris are left in the engine bay.
Note: Always refer to your specific vehicle's repair manual for detailed, step-by-step instructions and safety precautions.
Maintenance and Inspection
Engine and transmission mounts are wear items that can degrade over time due to heat, vibration, and chemical exposure. Regular inspection can help identify issues before they lead to more significant problems.
Inspection Schedule:
- Inspect mounts during routine oil changes or vehicle maintenance.
- Check for visible cracks, tears, or excessive compression in the rubber components.
- Look for signs of fluid leaks from hydraulic mounts (if applicable, though these are solid rubber/metal).
- Ensure all mounting bolts are tight and free from corrosion.
If any signs of wear or damage are observed, replacement is recommended to maintain vehicle performance and comfort.
Troubleshooting Common Issues
Worn or failing engine and transmission mounts can manifest in several ways. Here are common symptoms and potential causes:
| Symptom | Possible Cause (Worn Mounts) | Resolution |
|---|---|---|
| Excessive engine vibration felt in cabin | Degraded rubber in engine mounts | Inspect and replace engine mounts |
| Clunking or banging noises during acceleration/braking | Engine/transmission shifting due to failed mounts | Inspect and replace affected mounts |
| Engine appears to move excessively when revved in park/neutral | Worn engine mounts allowing too much movement | Inspect and replace engine mounts |
| Vibration during gear shifts (especially automatic) | Worn transmission mount | Inspect and replace transmission mount |
If you experience any of these symptoms, it is advisable to have your vehicle inspected by a qualified technician.
Specifications
| Attribute | Detail |
|---|---|
| Product Model Number | MK2416-03 |
| Brand | OMNI5 |
| Material | Alloy Steel (with rubber components) |
| Item Weight | 8.31 pounds (total package) |
| Package Dimensions | 10 x 8 x 4 inches |
| Engine Mount Interchange # | A2698 |
| Transmission Mount Interchange # | A2639 |
| Mounting Type | Chassis Mount |
Warranty and Support
OMNI5 provides a Five-Year Warranty for this product, offering a one-time replacement for parts. This warranty covers manufacturing defects and material failures under normal operating conditions.
For warranty claims, technical support, or any product-related inquiries, please contact OMNI5 customer service through the retailer where the product was purchased or visit the official OMNI5 store page on Amazon: OMNI5 Amazon Store.
When contacting support, please have your purchase details and product model number (MK2416-03) available.