Movo WMIC80 UHF Expandable Wireless Lavalier Microphone System User Manual

Introduction

The Movo WMIC80 UHF Expandable Wireless Lavalier Microphone System is designed to provide high-quality audio recording for DSLR cameras, camcorders, and portable recorders. This system operates within the UHF frequency range of 568 MHz-599 MHz, offering 96 unique frequency selections across two groups of 48 channels to ensure clear, interference-free transmission. It is ideal for various applications including EFP/ENG, interviews, vlogging, and more, providing reliable audio capture over distances up to 330 feet (100m) in open areas.

The system includes a portable bodypack transmitter with a lavalier microphone, and a portable receiver that can accommodate up to two WMIC80 transmitters, allowing for flexible recording setups.

What's in the Box

Image: A visual representation of all components included in the Movo WMIC80 system packaging.

• 1 x Portable Bodypack Transmitter with Lavalier Microphone
• 1 x Portable Receiver (capable of receiving signals from up to 2 WMIC80 transmitters)
• 1 x Camera Shoe Mount
• 1 x Stereo 3.5mm Output Cable
• 1 x XLR Output Cable
• User Manual (this document)
• Warranty Card

Product Overview

Transmitter (TX)

Image: The Movo WMIC80 transmitter and receiver units, along with the included cables and lavalier microphone.

• Lavalier Microphone Input: Connects the included lavalier microphone.
• Line-In Input: For connecting external audio sources.
• Power/Mute Button: Press and hold to power on/off. Short press to mute/unmute.
• LCD Display: Shows channel number, battery status, and signal strength.
• Channel Selection Buttons: Used to change the operating frequency channel.
• Belt Clip: For attaching the transmitter to clothing or a belt.
• Battery Compartment: Requires 2 AA batteries.

Receiver (RX)

• Antennas (ANT-A, ANT-B): For receiving signals from transmitters.
• Line Out: 3.5mm output for connecting to cameras, camcorders, or recorders.
• Headphone Output: 3.5mm jack for real-time audio monitoring.
• Power Button: Press and hold to power on/off.
• LCD Display: Shows channel number, battery status, and signal strength for both A and B channels.
• Channel Selection Buttons: Used to change the operating frequency channel.
• Shoe Mount: For attaching the receiver to a camera's hot shoe.
• Battery Compartment: Requires 2 AA batteries.

Setup Instructions

1. Install Batteries: Open the battery compartments on both the transmitter and receiver. Insert 2 AA batteries into each unit, ensuring correct polarity.
2. Attach Lavalier Microphone: Connect the lavalier microphone to the "MIC IN" port on the transmitter. Secure the microphone to the subject's clothing, approximately 6-8 inches from the mouth, to capture optimal audio.
3. Mount Receiver: Attach the receiver to your camera's hot shoe using the provided camera shoe mount.
4. Connect Receiver to Camera: Use the appropriate output cable (3.5mm Stereo or XLR) to connect the "LINE OUT" port on the receiver to the audio input of your camera, camcorder, or audio recorder.
5. Power On Units: Press and hold the power button on both the transmitter and receiver until their LCD displays illuminate.
6. Select Channels:
   • On the receiver, use the channel selection buttons to choose a desired frequency channel.
   • On the transmitter, adjust its channel to match the receiver's selected channel. Ensure both units are on the same group (A or B) and channel number for proper pairing.
   • If interference is detected, select a different channel until clear audio is achieved. The system offers 96 unique frequency selections to minimize interference.
7. Monitor Audio: Connect headphones to the "HEADPHONE" jack on the receiver to monitor the audio in real-time. Adjust the headphone volume as needed.

Image: The Movo WMIC80 receiver mounted on a DSLR camera, demonstrating a typical setup for professional audio recording.

Operating Instructions

Channel Synchronization

For optimal performance, ensure the transmitter and receiver are synchronized to the same channel. The WMIC80 system features an automatic scan function to find the clearest available frequency. If manual adjustment is needed, use the channel selection buttons on both units to match them.

Image: The Movo WMIC80 system being used in an indoor setting, demonstrating its capability for interference-free transmission during an interview.

Using Multiple Transmitters (Expandable System)

The WMIC80 receiver is designed to accommodate up to two WMIC80 transmitters simultaneously. This is useful for recording two subjects at once. To use two transmitters:

1. Ensure you have a second WMIC80 transmitter unit.
2. Power on both transmitters and the receiver.
3. Assign one transmitter to Channel Group A and the other to Channel Group B on the receiver.
4. Match the channels on each transmitter to their respective groups (A or B) on the receiver.
5. Monitor both audio channels via the receiver's headphone output.

Image: An illustration of the Movo WMIC80 system's expandability, showing two transmitters wirelessly connected to a single receiver.

Audio Range and Performance

The system offers a wireless range of over 330 feet (100m) in open, unobstructed areas and approximately 200 feet (60m) with obstacles. Factors such as physical barriers, Wi-Fi signals, and other wireless devices can affect the effective range. For best results, maintain a clear line of sight between the transmitter and receiver whenever possible.

Image: A diagram visually representing the 330-foot audio transmission range between the Movo WMIC80 transmitter and receiver.

Lavalier Microphone Usage

The included lavalier microphone is omnidirectional, meaning it captures sound equally from all directions. This makes it suitable for various recording scenarios. Ensure the microphone is securely clipped and positioned correctly for clear audio capture.

Image: A close-up view of the Movo WMIC80 omnidirectional lavalier microphone, highlighting its design for professional audio capture.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the units. Do not use liquid cleaners or solvents.
• Battery Care: Remove batteries from the units if they will not be used for an extended period to prevent leakage.
• Storage: Store the system in a cool, dry place, away from direct sunlight and extreme temperatures.
• Cable Care: Avoid sharp bends or kinks in the cables to prevent damage.

Troubleshooting

Specifications

Warranty and Support

The Movo WMIC80 UHF Expandable Wireless Lavalier Microphone System comes with a 1-Year Warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please refer to the warranty card included in your product packaging or visit the official Movo website for contact information.

Movo provides US-based customer support to assist with any technical inquiries or issues you may encounter.

For further assistance, you may contact Movo support via their official website: Movo Support