We R Memory Keepers Wick Candle Making Kit Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of your We R Memory Keepers Wick Candle Making Kit. Please read all instructions carefully before operating the device to ensure proper function and safety.

The Wick Candle Making Kit is designed to simplify the candle-making process, allowing users to create custom candles with ease. It is compatible with various wax types, including paraffin, beeswax, and soy wax.

2. Safety Information

WARNING: Proposition 65 Warning

This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

• Always operate the candle maker on a stable, heat-resistant surface.
• Keep out of reach of children and pets. Adult supervision is required when children are present.
• Do not leave the device unattended while in operation.
• Avoid contact with hot wax and heated surfaces. Use appropriate protective gear, such as heat-resistant gloves, if necessary.
• Ensure the locking cover lid is securely in place during operation to prevent spills.
• Do not immerse the electrical unit in water or any other liquid.
• Unplug the device when not in use and before cleaning.

3. Package Contents

Verify that all components are present in your kit:

• 1 x Wick Candle Maker Machine
• 3 lbs Paraffin Wax
• 72 inches Cotton Wick
• 3 x Candle Rubber Stoppers
• 4 x Wax Pigment Packs (Red, Yellow, Blue, White)
• 3 x Candle Molds with Base
• 1 x Color Mixing Chart
• Additional accessories: 3 metal rods (for wick centering)

4. Setup

1. Unpack: Carefully remove all items from the packaging.
2. Placement: Place the Wick Candle Maker machine on a flat, stable, and heat-resistant surface. Ensure adequate ventilation.
3. Wick Preparation:
   • Thread the cotton wick through the small hole in the center of a rubber stopper.
   • Secure the wick at the bottom of the stopper with a knot or by pressing the wick into the stopper's groove.
   • Insert the stopper with the wick into the base of your chosen candle mold. Ensure the wick is centered and taut.
   • Use a metal rod or a wick bar (if included or self-supplied) across the top of the mold to keep the wick centered and upright.
4. Wax Loading: Open the lid of the candle maker. Pour the desired amount of wax pellets into the melting chamber.
5. Add Color/Scent (Optional): If using pigment or essential oils, add them to the wax in the melting chamber. Refer to the color mixing chart for pigment ratios.

5. Operating Instructions (Candle Making Process)

1. Power On: Plug the candle maker into a standard electrical outlet.
2. Set Temperature: Turn the temperature dial to the desired setting (Low, Medium, High). The machine features a thermostat to maintain consistent wax temperature.
3. Melt Wax: Allow the wax to melt completely. Stir occasionally with a wooden stick to ensure even melting and color distribution.
4. Position Mold: Place the prepared candle mold with the centered wick directly under the wax valve.
5. Dispense Wax: Turn the wax valve knob to open and allow the melted wax to flow into the mold. Fill the mold to the desired level.
6. Cooling: Once filled, turn the wax valve knob to close. Carefully remove the mold and place it on a flat, stable surface to cool and solidify. This process can take several hours depending on the size of the candle and ambient temperature.
7. Second Pour (Optional): For layered candles or to top off shrinkage, repeat steps 4-6 once the first layer has partially solidified.
8. Remove Candle: Once the candle is completely cool and hard, gently remove it from the mold.
9. Trim Wick: Trim the wick to approximately 1/4 inch above the candle surface.

6. Maintenance and Cleaning

Regular cleaning ensures the longevity and optimal performance of your candle maker.

1. Unplug: Always unplug the device and allow it to cool completely before cleaning.
2. Remove Excess Wax: Once cooled, any remaining solid wax in the melting chamber can be gently scraped out. The removable wax collector facilitates this.
3. Wipe Down: Use a soft, damp cloth to wipe the exterior of the machine. For stubborn wax residue, a small amount of rubbing alcohol on a cloth can be used, but avoid contact with electrical components.
4. Clean Molds: Wash candle molds and rubber stoppers with warm, soapy water. Ensure they are completely dry before reuse.
5. Storage: Store the candle maker and its components in a clean, dry place.

7. Troubleshooting

• Wax not melting:
  • Ensure the device is plugged in and the power switch is on.
  • Check the temperature setting; increase if necessary.
  • Verify that the wax is suitable for melting in the device (paraffin, soy, beeswax).
• Wax not dispensing:
  • Ensure the wax is fully melted and free of solid clumps.
  • Check that the wax valve knob is fully open.
  • Inspect the wax valve for any blockages and clear carefully if found (only when cool and unplugged).
• Wick not centered:
  • Ensure the rubber stopper is securely placed at the bottom of the mold.
  • Use a wick bar or metal rod across the top of the mold to hold the wick in place during pouring and cooling.
• Candle has air bubbles or uneven surface:
  • Pour wax slowly to minimize air bubbles.
  • Allow the candle to cool slowly and evenly. A second pour can often fix shrinkage or surface imperfections.

8. Specifications

• Brand: We R Memory Keepers
• Model Name: The Wick Candle Maker
• Item Model Number: 660651
• UPC: 633356606512
• Dimensions (L x W x H): 7.83 x 7.67 x 9.52 inches
• Item Weight: 1 Pounds
• Material: Paraffin Wax (kit includes), compatible with Beeswax, Soy
• Number of Pieces (Kit): 19
• Safety Certification: UL listed

9. Warranty and Support

For warranty information or technical support, please contact We R Memory Keepers customer service directly. Refer to the product packaging or the official We R Memory Keepers website for current contact details.

Manufacturer: We R Memory Keepers

Website: We R Memory Keepers Store