Introduction
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your XLERATOReco XL-W-ECO 1.1N High Speed Commercial Hand Dryer. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Image: Two XLERATOReco XL-W-ECO 1.1N hand dryers, showcasing their sleek white cast cover design. These units are designed for high-speed commercial use.
Product Specifications
| Specification | Detail |
|---|---|
| Model | XL-W-ECO 1.1N |
| Dry Time | 8-10 Seconds |
| Energy Consumption | 500 Watts (No Heat Technology) |
| Voltage | 110/120V |
| Amperage | 4.5 Amps |
| Cover Material | White Cast |
| Mounting | Surface Mount |
| Noise Reduction | 1.1N Noise Reduction Nozzle |
| Dimensions (H x W x D) | 12 11/16" (322 mm) x 11 3/4" (298 mm) x 6 11/16" (170 mm) |
| Item Weight | 35.4 pounds |
| Manufacturer | Excel Dryer |
| Certifications | GreenSpec Listed, LEED Credits, Made in USA Certified |
Image: Side view of the XLERATOReco hand dryer, illustrating its precise dimensions: 12 11/16 inches (322 mm) in height, 11 3/4 inches (298 mm) in width, and 6 11/16 inches (170 mm) in depth. These measurements are crucial for proper installation planning.
Image: The XLERATOReco hand dryer displayed alongside its key certifications, including GSA approval, BuildingGreen approval, and UL certification, highlighting its compliance with industry standards and environmental considerations.
Safety Instructions
- Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Disconnect power at the circuit breaker before installing or servicing the unit.
- Ensure proper grounding to prevent electrical shock.
- Do not operate the hand dryer if it is damaged or malfunctioning.
- Keep hands and foreign objects away from the air outlet and intake during operation.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Setup and Installation
The XLERATOReco hand dryer is designed for surface mounting. Ensure the mounting surface is structurally sound and capable of supporting the unit's weight.
Tools Required:
- Drill
- Screwdriver (Phillips and Flathead)
- Wire Strippers
- Level
- Measuring Tape
- Pencil
Installation Steps:
- Select Location: Choose a suitable wall location, ensuring adequate clearance around the unit for user access and maintenance. Refer to local accessibility guidelines for mounting heights.
- Prepare Wiring: Ensure power is disconnected. Run appropriate electrical wiring (110/120V, 4.5 Amps) to the chosen installation point.
- Mount Back Plate: Remove the cover from the hand dryer to expose the mounting holes. Secure the back plate to the wall using appropriate fasteners for the wall type. Use a level to ensure the unit is straight.
- Electrical Connection: Connect the electrical supply wires to the terminal block inside the unit. Follow the wiring diagram provided inside the unit cover. Ensure all connections are secure.
- Attach Cover: Reattach the hand dryer cover, ensuring it is securely fastened.
- Test Operation: Restore power at the circuit breaker. Test the hand dryer by placing hands under the sensor.
Operating Instructions
The XLERATOReco hand dryer operates automatically via an infrared sensor.
- Activate: Place hands directly under the air outlet. The sensor will detect your hands and activate the air flow.
- Dry Hands: Move hands slowly back and forth under the air stream to ensure thorough drying. The high-speed air flow will dry hands in 8-10 seconds.
- Deactivate: Remove hands from the sensor's range. The air flow will automatically stop.
Image: A user demonstrating the proper way to use the XLERATOReco hand dryer, placing hands under the sensor for automatic activation and efficient drying.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your XLERATOReco hand dryer.
Cleaning:
- Exterior: Clean the exterior cover with a soft, damp cloth and mild soap. Avoid abrasive cleaners or solvents that may damage the finish.
- Sensor Lens: Gently wipe the sensor lens with a soft, dry cloth to ensure proper operation.
Air Filter Maintenance:
The unit features an air filter intake to protect internal components. Periodically inspect and clean the air filter.
- Disconnect Power: Always disconnect power to the unit at the circuit breaker before performing any maintenance.
- Remove Cover: Carefully remove the hand dryer cover.
- Locate Filter: Identify the air filter at the intake point (refer to internal diagram).
- Clean/Replace Filter: Remove the filter and clean it with a vacuum cleaner or wash it with warm, soapy water. Ensure it is completely dry before reinstallation. Replace if damaged.
- Reassemble: Reinstall the filter and securely attach the cover.
- Restore Power: Restore power and test the unit.
Image: An internal view of the XLERATOReco hand dryer, highlighting key components such as the sealed control board, adjustable sound option, air filter intake, 1.1N noise reduction nozzle, and external LED diagnostic panel. This view is useful for understanding maintenance points.
Troubleshooting
Refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hand dryer does not activate. | No power supply. Obstructed sensor. Faulty sensor. | Check circuit breaker. Clean sensor lens. Contact qualified service personnel. |
| Air flow is weak. | Clogged air filter. Motor issue. | Clean or replace air filter. Contact qualified service personnel. |
| Unit runs continuously. | Sensor malfunction. Obstruction in sensor path. | Clean sensor lens. Contact qualified service personnel. |
| Unusual noise during operation. | Loose components. Motor bearing wear. | Disconnect power and inspect for loose parts (if qualified). Contact qualified service personnel. |
For issues not listed or if solutions do not resolve the problem, contact Excel Dryer customer support or a qualified service technician.
Warranty Information
The XLERATOReco XL-W-ECO 1.1N High Speed Commercial Hand Dryer comes with a 7-Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.
For full warranty terms and conditions, please refer to the official Excel Dryer website or contact customer support.
Support and Contact
For technical assistance, parts, or warranty inquiries, please contact Excel Dryer customer support.
- Manufacturer: Excel Dryer
- Website: www.exceldryer.com
- Phone: Refer to the manufacturer's website for current contact numbers.