1. Product Overview
The Hanzim Flameless Flickering LED Pillar Candles offer a safe and convenient alternative to traditional candles. Crafted from real wax, these battery-operated candles provide a realistic flickering flame effect and warm light, enhancing any indoor setting without the risks of open flames, smoke, or dripping wax. This 9-pack set includes various pillar sizes and two remote controls for easy operation.
Key Features:
- Realistic Appearance: Made from real ivory wax with LED lights that mimic a natural flickering flame.
- Safety First: Battery-powered design eliminates fire risk, smoke, and messy dripping wax, making them safe for homes with children and pets.
- Convenient Remote Control: Includes a 10-key remote for easy operation, allowing control of on/off, timer settings, light modes (flicker/static), and brightness levels.
- Integrated Timer Function: Set candles to automatically turn off after 2, 4, 6, or 8 hours, with the timer cycling every 24 hours.
- Long-lasting LED: LED lamps have a lifespan of up to 50,000 hours, providing extended use.
2. Package Contents
Your Hanzim Flameless Flickering LED Pillar Candles package includes:
- 9 x LED Flameless Candles (two 4" pillars, two 5" pillars, two 6" pillars, one 7" pillar, one 8" pillar, one 9" pillar; each 2.2" diameter)
- 2 x 10-Key Remote Controls
- 1 x Operating Manual
Note: 2 AA batteries are required per candle and are NOT included in this package.
3. Setup
3.1 Battery Installation
- Locate the battery compartment at the bottom of each LED candle.
- Open the battery cover by sliding it off.
- Insert 2 AA batteries into each candle, ensuring correct polarity (+/-).
- Replace the battery cover securely.
- Turn the ON/OFF switch on the bottom of each candle to the "ON" position.
3.2 Initial Placement
Place the candles in your desired indoor locations. Ensure the candles are within range of the remote control for convenient operation.
4. Operating Instructions
The Hanzim Flameless LED Candles are operated using the included 10-key remote control.
4.1 Remote Control Functions
| Button | Function |
|---|---|
| ON | Turns all paired candles ON. |
| OFF | Turns all paired candles OFF. |
| 2H / 4H / 6H / 8H | Sets the timer for 2, 4, 6, or 8 hours. Candles will automatically turn off after the set time and turn on again at the same time the next day (24-hour cycle). |
| Candle Mode | Activates the realistic flickering flame effect. |
| Light Mode | Activates a steady, non-flickering light. |
| DIM (-) | Decreases the brightness level. |
| DIM (+) | Increases the brightness level. |
4.2 Pairing the Remote
The remote control is typically pre-paired with the candles. If a candle does not respond, ensure its bottom switch is in the "ON" position and try pressing the "ON" button on the remote again while pointing it directly at the candle.
5. Maintenance
5.1 Battery Replacement
When the light from the candles appears dim or the remote control responsiveness decreases, it's time to replace the batteries. Follow the steps in Section 3.1 to replace the 2 AA batteries in each candle.
- Always use fresh, high-quality AA batteries for optimal performance.
- Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the candles will not be used for an extended period to prevent leakage.
5.2 Cleaning
To clean the candles, gently wipe them with a soft, dry cloth. Do not use abrasive cleaners or immerse the candles in water.
5.3 Storage
Store candles in a cool, dry place away from direct sunlight or extreme temperatures to prevent wax deformation.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Candle does not turn on. | Batteries are dead or incorrectly installed. | Check battery polarity and replace with fresh AA batteries. |
| ON/OFF switch on the bottom is in the "OFF" position. | Slide the switch to the "ON" position. | |
| Remote control is not working. | Remote battery is dead. | Replace the CR2025 coin cell battery in the remote control. |
| Remote is too far or obstructed. | Ensure direct line of sight and operate within a reasonable range (approx. 10-16 ft). | |
| Timer function is inconsistent. | Interference or low battery. | Ensure candles are not near strong electromagnetic interference. Replace batteries if needed. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Hanzim |
| Model Number | F9 |
| Color | Ivory |
| Material | Real Wax |
| Light Source Type | LED |
| Light Color | Warm White |
| Power Source | Battery Powered (2 AA batteries per candle, not included) |
| Battery Life (approx.) | 150 hours |
| LED Lamp Lifetime | Up to 50,000 hours |
| Candle Diameter | 2.2 inches |
| Candle Heights | Two 4", two 5", two 6", one 7", one 8", one 9" |
| Control Method | Remote Control |
| Special Features | Remote control, Timer (2/4/6/8H), Flickering/Static Light, Dimmable |
| Indoor/Outdoor Usage | Indoor (Not Water Resistant) |
| Item Weight | 3.52 Pounds (total for set) |
| UPC | 602463115682 |
8. Warranty & Support
For any questions, concerns, or support regarding your Hanzim Flameless Flickering LED Pillar Candles, please refer to the contact information provided at the point of purchase or visit the official Hanzim store on Amazon.
Specific warranty details may vary. Please retain your proof of purchase for any warranty claims.