StarNY HP-10
StarNY HP-10 Digital Torque Meter User Manual
Model: HP-10
1. Introduction
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the StarNY HP-10 Digital Torque Meter. The HP-10 is a precision instrument designed for measuring and testing the torque of various tools, including electric screwdrivers, pneumatic screwdrivers, torque screwdrivers, and torque wrenches. It is also suitable for correcting the torque of these tools and measuring the torque of other fixtures.
Its simple operation, high accuracy, and portability make it ideal for a wide range of industrial and service applications.
2. Safety Information
Please read all safety warnings and instructions carefully before operating the device.
- Do not exceed maximum allowable load: Applying torque beyond the specified range can damage the instrument and void the warranty.
- Do not continuous impact: Avoid sudden, high-impact forces on the measurement head.
- Charging: When "LO" or "CHG" is displayed, charge quickly. Charging time should not exceed six hours. When charging the battery, keep the power ON.
- Battery: Do not detach the rechargeable battery from the main unit.
- Serial Number: Do not remove the main unit and charger serial numbers.
- Adapter: Do not leave or store the adapter with its string coiled.
- Voltage: The device operates on 6 volts DC. Ensure the correct power adapter is used.
3. Product Overview
The StarNY HP-10 Digital Torque Meter features a robust design with intuitive controls and a clear digital display for precise torque measurements.
Figure 3.1: Front view of the HP-10 Digital Torque Meter, showing the display, power switch, zero adjustment knob, reset button, unit/capacity switches, mode switch, and square drive socket.
3.1 Components
- Digital Display: Shows torque readings, unit, and battery status.
- Power Switch (ON/OFF): Controls the device's power.
- Zero Adjust Knob: Used to zero the display before measurement.
- Reset Button: Resets the measurement.
- Unit Switch: Selects measurement units (Kgf.Cm, Lbf.in, Nm).
- Capacity Switch: Adjusts the measurement capacity range.
- Mode Switch (PEAK/TRACK): Toggles between Peak Hold and Track modes.
- Square Drive Socket: The interface for connecting torque tools.
- DC IN Port: For connecting the power adapter for charging.
Figure 3.2: The HP-10 Digital Torque Meter neatly packed in its protective carrying case, alongside its power adapter and accessories.
4. Setup
4.1 Initial Charging
Before first use, or if the battery indicator shows "LO" or "CHG", the device needs to be charged. The HP-10 uses five 1.2V NiMH cells (1000mA) and offers approximately 96 hours of continuous running time on a full charge.
- Ensure the power switch is in the ON position.
- Connect the provided AC adapter to the DC IN port on the back of the unit.
- Plug the AC adapter into a suitable power outlet (AC 110-220V 50Hz).
- Allow approximately 6 hours for a full charge. The device features automatic charge control.
Note: The battery life is approximately 300 charges.
4.2 Powering On/Off
To power on the device, slide the Power Switch to the ON position. To power off, slide it to the OFF position.
5. Operating Instructions
5.1 Unit Selection
The HP-10 supports three common torque units: Kgf.Cm, Lbf.in, and Nm. To switch between units, use the Unit Switch located on the front panel.
- Kgf.Cm: Kilogram-force centimeter
- Lbf.in: Pound-force inch
- Nm: Newton meter
5.2 Zero Adjustment
Before taking a measurement, it is crucial to zero the display to ensure accuracy.
- Ensure no load is applied to the square drive socket.
- Rotate the Zero Adjust Knob until the display reads "0.000" (or close to zero, depending on the selected unit and range).
- Press the RESET button to confirm zero.
5.3 Measurement Modes
The HP-10 offers two measurement modes: Peak Hold and Track.
- PEAK Mode: In this mode, the display will hold the maximum torque value detected during the measurement. This is useful for capturing the peak torque applied.
- TRACK Mode: In this mode, the display shows the real-time torque value as it is being applied. This is useful for observing continuous torque changes.
To switch between modes, use the Mode Switch.
5.4 Taking a Measurement
- Power on the device and select the desired unit.
- Perform a zero adjustment as described in Section 5.2.
- Select the appropriate measurement mode (PEAK or TRACK).
- Connect the torque tool (e.g., screwdriver, wrench) to the square drive socket.
- Apply torque to the tool. Observe the reading on the digital display.
- For PEAK mode, the highest value will be held. For TRACK mode, the value will update in real-time.
- After measurement, remove the tool.
6. Maintenance
Proper maintenance ensures the longevity and accuracy of your HP-10 Digital Torque Meter.
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the device in its protective carrying case in a dry, cool environment, away from direct sunlight and extreme temperatures.
- Battery Care: Recharge the battery when indicated. Avoid completely draining the battery for extended periods. If storing for a long time, charge the battery periodically.
- Calibration: For continued accuracy, periodic calibration by a qualified technician is recommended.
7. Troubleshooting
This section addresses common issues you might encounter with your HP-10 Digital Torque Meter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Battery is depleted. | Connect the AC adapter and charge the device for at least 6 hours. Ensure the power switch is ON during charging. |
| Inaccurate readings. | Device not zeroed correctly. Exceeding maximum load. Needs calibration. | Perform zero adjustment before each measurement. Ensure applied torque is within the specified range. Contact customer support for calibration services. |
| "LO" or "CHG" displayed. | Low battery. | Charge the device immediately. |
| Display frozen in PEAK mode. | This is normal behavior for PEAK mode. | Press the RESET button to clear the peak value, or switch to TRACK mode for real-time readings. |
8. Specifications
Detailed technical specifications for the StarNY HP-10 Digital Torque Meter.
| Parameter | Value |
|---|---|
| Peak Range (N.m) | 0.015 - 1.000 |
| Peak Range (lbf.in) | 0.15 - 1.000 |
| Peak Range (kgf.cm) | 0.15 - 10.00 |
| Accuracy | Up to ±1% (F.S.) |
| Dimension (mm) | 230(W) x 124(D) x 65.2(H) |
| Weight | 4 kg |
| Battery Pack | Five 1.2V NiMH cells, 1000mA |
| Charging Time | Approx. 6 hours |
| Continuous Running Time (Full Charge) | 96 Hours |
| Battery Life | Approx. 300 charges |
| Material | Metal |
| Voltage | 6 Volts (DC) |
| Power Source | Battery (Internal NiMH) |
| Operating Temperature | -10°C to 40°C |
| Operating Humidity | 35%RH to 65%RH |
Figure 8.1: Detailed performance specifications for various HP series torque meters, including the HP-10 model.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official StarNY website. Keep your purchase receipt as proof of purchase.
Protection plans are available for extended coverage:
- 3-Year Protection Plan
- 4-Year Protection Plan
- Complete Protect: One plan covers all eligible past and future purchases.
For returns, a 30-day refund/replacement policy applies from the date of purchase.