1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Livpure i25 25 LPH RO UV Commercial Water Purifier. Please read this manual thoroughly before operating the appliance and retain it for future reference.
The Livpure i25 is a commercial-grade water purification system designed to provide clean and safe drinking water. It incorporates a 7-stage purification process to ensure high-quality output.
Key Features:
- 7-Stage Smart Water Purification System: Includes Sediment Filter, Pre-Activated Carbon Filter cum Adsorber, Carbon Block Filter cum Adsorber, Anti-Scalant Cartridge, Reverse Osmosis (RO) Membrane, UV Disinfection Column, and Post Carbon.
- Designed for Commercial RO applications.
- Features a Taste Enhancer for improved water quality.
- Equipped with Autoflush functionality for membrane longevity.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage to the appliance:
- Ensure the power supply matches the specifications listed on the product label.
- Do not operate the purifier with a damaged power cord or plug.
- Keep the appliance away from direct sunlight, high temperatures, and corrosive chemicals.
- Only use genuine Livpure replacement parts and filters.
- Do not attempt to repair or modify the appliance yourself. Contact qualified service personnel.
- Ensure proper ventilation around the unit.
- This appliance is intended for commercial use.
3. Components Included
Upon unpacking, please verify that all the following components are present:
- Livpure i25 Water Purifier Unit
- Industrial Filter Cartridge
- Autoflush mechanism
- Installation Kit (hoses, connectors, etc.)
- User Manual
Image 1: Livpure i25 Commercial RO UV Water Purifier. This image displays the main purification unit, typically installed under a sink or in a designated utility area.
4. Setup and Installation
The Livpure i25 is designed for Under Sink Installation. Professional installation is highly recommended to ensure proper functioning and to avoid damage.
Installation Steps (General Guide):
- Site Selection: Choose a suitable location under the sink that provides adequate space for the unit and access for maintenance. Ensure the area is dry and protected from extreme temperatures.
- Water Supply Connection: Turn off the main water supply. Connect the purifier's inlet to the cold water line using the provided connectors and shut-off valve.
- Drain Connection: Install the drain saddle valve onto the drain pipe to allow wastewater discharge from the RO membrane.
- Dispenser Faucet Installation: Drill a hole in the sink or countertop (if not already present) and install the dedicated purified water faucet.
- Filter Installation: Insert the filter cartridges into their respective housings as per the markings. Ensure they are securely tightened.
- Electrical Connection: Plug the power cord into a grounded electrical outlet.
- Leak Check: Slowly turn on the main water supply and check all connections for leaks. Tighten any leaking connections.
- Initial Flush: Allow the unit to run for approximately 15-30 minutes to flush out any carbon fines and air from the system. Discard the first few tanks of purified water.
For detailed installation instructions, refer to the separate installation guide provided with the product or consult a certified technician.
5. Operating Instructions
Once installed and flushed, your Livpure i25 purifier is ready for operation.
Normal Operation:
- Ensure the power supply is connected and switched on.
- The purifier will automatically start the purification process when water is drawn or when the internal storage tank (if applicable) requires refilling.
- Open the dedicated purified water faucet to dispense water.
- The autoflush feature will periodically clean the RO membrane to maintain its efficiency.
Indicators:
The unit may feature LED indicators for power, purification status, and filter change alerts. Refer to the specific indicator guide on your unit for details.
6. Maintenance
Regular maintenance is crucial for the optimal performance and longevity of your Livpure i25 water purifier.
Filter Replacement Schedule:
The frequency of filter replacement depends on the quality of the input water and usage volume. General guidelines are:
- Sediment Filter: Every 3-6 months
- Pre-Activated Carbon Filter: Every 6-12 months
- Carbon Block Filter: Every 6-12 months
- Anti-Scalant Cartridge: Every 6-12 months
- RO Membrane: Every 12-24 months (or when TDS rejection drops significantly)
- UV Lamp: Every 12 months
- Post Carbon Filter: Every 12 months
Always use genuine Livpure replacement filters. Contact customer support for filter purchase and replacement services.
Cleaning:
- Wipe the exterior of the unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the area around the purifier is kept clean and free from dust and debris.
7. Troubleshooting
If you encounter issues with your Livpure i25 purifier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No water dispensed | No power; Water supply off; Clogged filters; Low water pressure. | Check power connection; Turn on water supply; Replace filters; Check input water pressure. |
| Slow water flow | Clogged filters; Clogged RO membrane; Low water pressure. | Replace filters; Replace RO membrane; Check input water pressure. |
| Unpleasant taste/odor | Expired carbon filters; Contaminated post-carbon filter. | Replace carbon filters and post-carbon filter. |
| Water leakage | Loose connections; Cracked housing/filter. | Tighten all connections; Inspect for cracks and replace damaged parts. |
| High TDS in purified water | Worn out RO membrane. | Replace RO membrane. |
If the problem persists after attempting these solutions, please contact Livpure customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Livpure |
| Model Name | i25 |
| Special Feature | RO, UV |
| Material | Food Grade |
| Capacity | 0.42 LPM (Liters Per Minute) |
| Included Components | Industrial Filter Cartridge, Autoflush |
| Container Type | Cartridge |
| Installation Type | Under Sink |
| Purification Method | Reverse Osmosis, Ultraviolet |
| Power Source Type | Corded Electric |
| Maximum Flow Rate | 25 Liters Per Hour |
| Supported Water TDS Level Maximum | 900 PPM |
| Manufacturer | Livpure |
9. Warranty and Support
Livpure products are manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Livpure website.
For technical assistance, service requests, or to purchase genuine replacement parts, please contact Livpure customer support:
- Customer Service: Refer to your product documentation for contact numbers or visit the Livpure official website.
- Website: www.livpure.com (Example link, please verify official website)
