Introduction
Thank you for choosing the LIGHTACCENTS Honors Paper Floor Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before assembly and operation, and retain them for future reference.
Image: The LIGHTACCENTS Honors Paper Floor Lamp providing soft ambient light in a modern living room.
Important Safety Information
- Electrical Safety: Always unplug the lamp from the power outlet before cleaning, changing light bulbs, or performing any maintenance.
- Bulb Type: Use only E26 Medium base bulbs, up to 40 watts each. LED bulbs are recommended for energy efficiency and compliance with U.S. DOE lighting standards.
- Placement: Ensure the lamp is placed on a stable, level surface to prevent tipping. Keep away from water and flammable materials.
- Children and Pets: Keep the lamp out of reach of children and pets to prevent accidental damage or injury.
- Indoor Use Only: This lamp is designed for indoor use only and is not waterproof.
What's in the Box
Please check that all components are present before beginning assembly:
- 1x Honors Paper Floor Lamp Shade
- 1x Chrome Base
- 1x Lamp Pole Assembly (multiple sections)
- 1x On/Off Foot Switch (integrated with power cord)
- 1x User Manual (this document)
- Note: Light bulbs are not included.
Image: All parts of the lamp, including the base, pole sections, light fixtures, and folded paper shade, ready for assembly.
Setup and Assembly Instructions
Assembly is quick and easy, requiring no tools. Follow these steps:
- Connect the Poles: Carefully connect the three metal pole sections together to form the main frame. Ensure they are securely screwed into each other.
- Attach Light Fixtures: Unscrew the outer ring of each light fixture. Insert the light fixtures onto the main frame, then screw the outer rings back on to secure them.
- Route the Cord: Run the power cord along the pole and use the provided clips to secure it neatly to the pole.
- Install Light Bulbs: Twist your E26 Medium base light bulbs (not included) into the sockets. LED bulbs are recommended.
- Mount to Base: Attach the assembled main frame to the chrome base using the bolt provided. Tighten securely from underneath the base.
- Position the Shade: Carefully set the paper shade on top of the assembled frame and gently pull it down over the frame.
- Secure the Shade: Screw in the small bolt at the bottom of the frame to clip and secure the bottom of the paper shade.
Video: Official assembly instructions for the LIGHTACCENTS Floor Lamp, demonstrating each step from unboxing to final setup.
Image: A diagram illustrating the dimensions of the lamp: 59 inches height, 10 inches length, and 10 inches width.
Operating Instructions
The LIGHTACCENTS Honors Paper Floor Lamp features a convenient on/off foot switch for easy operation.
- Plug In: Once assembled, plug the lamp's power cord into a standard 120V electrical outlet.
- Turn On/Off: Locate the circular foot switch on the power cord. Press the switch with your foot to turn the lamp on or off.
Image: A close-up view of the foot switch, highlighting its design for easy operation.
Maintenance
- Cleaning: To clean the paper shade, gently wipe with a dry, soft cloth. Do not use liquid cleaners or abrasive materials, as they may damage the shade. For the chrome base, use a soft, damp cloth and mild cleaner if necessary, then dry thoroughly.
- Bulb Replacement: Ensure the lamp is unplugged before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with E26 Medium base bulbs, maximum 40 watts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Lamp is wobbly. |
|
|
| Shade is not straight or secure. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | Honors Paper Floor Lamp |
| Model Number | 26121A-20 |
| Brand | LIGHTACCENTS |
| Product Dimensions | 7"D x 7"W x 59"H |
| Item Weight | 4 Pounds |
| Shade Material | Paper |
| Base Material | Metal (Chrome finish) |
| Bulb Base | E26 Medium |
| Max Wattage | 40 watts per bulb (2 bulbs) |
| Voltage | 120 Volts |
| Switch Type | Push Button (Foot Switch) |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | Yes |
Warranty Information
This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the packaging or contact customer support for specific warranty terms and conditions.
Customer Support
For any questions, assistance, or to report missing/damaged parts, please contact LIGHTACCENTS customer support through the retailer's platform or visit the official LIGHTACCENTS website for contact details.