Milbank U8032-XL-KK-BLG 1 Phase Ringless Meter Socket User Manual

Product Overview

Milbank 1-Phase 2-Position Horn bypass ringless meter socket is rated at 100 Amps and 300 Volt AC. Surface mountable meter socket has G90 galvanized steel enclosure with powder-coated finish. Socket has barrel lock with guard provision and four terminal jaws. This 3-Wire meter socket with overhead and underground cable entry, has lay-in line side and lay-in load side terminal connections. It accommodates wire of size 6 AWG - 350 KCMIL at line side and 6 - 2/0 AWG at load side. Socket measures 16 inches.

Key features include:

• Small closing plate
• Current rating of 100 Amps
• Has voltage rating of 300 volt AC

Image: Front view of the Milbank U8032-XL-KK-BLG 1 Phase Ringless Meter Socket, showing the internal wiring and jaw configuration.

Setup and Installation

Important: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure power is disconnected before beginning any installation work.

1. Mounting: Securely mount the meter socket to a stable surface using appropriate fasteners. Ensure the mounting location complies with local utility requirements for meter access and clearances.
2. Wiring - Line Side: Connect the incoming service conductors to the line side terminals. This meter socket accommodates wire sizes from 6 AWG to 350 KCMIL. Ensure all connections are tight and secure.
3. Wiring - Load Side: Connect the outgoing load conductors to the load side terminals. This meter socket accommodates wire sizes from 6 AWG to 2/0 AWG. Verify proper phasing and secure all connections.
4. Grounding: Establish a proper ground connection for the meter socket enclosure as required by electrical codes.
5. Meter Installation: Once wiring is complete and inspected, the utility meter can be installed into the socket jaws.
6. Enclosure Closure: Securely close the enclosure cover, ensuring all seals are properly seated to maintain the NEMA rating.

Operation

The Milbank U8032-XL-KK-BLG meter socket is a passive component designed to house an electric utility meter and provide connection points for electrical service. Its operation is primarily dependent on the utility meter installed within it and the electrical service connected to it.

• Power Flow: Electricity flows from the utility service through the line side terminals, passes through the meter (which measures consumption), and then exits through the load side terminals to the premises' electrical system.
• Horn Bypass: This model includes a horn bypass feature, which allows the utility to bypass the meter for maintenance or testing without interrupting power to the customer, provided the utility's procedures are followed. This is an internal utility function and not for user operation.
• Ringless Design: The ringless design simplifies meter installation and removal for utility personnel.

Maintenance

Regular maintenance of the meter socket itself is minimal due to its robust construction. However, periodic inspections are recommended to ensure continued safe and reliable operation.

• Visual Inspection: Periodically inspect the exterior of the meter socket for any signs of physical damage, corrosion, or tampering.
• Enclosure Integrity: Ensure the enclosure remains sealed and free from moisture or debris ingress.
• Pest Control: Keep the area around the meter socket clear of vegetation and debris to prevent pest infestations that could damage wiring.
• Professional Inspection: For internal inspections or any concerns regarding wiring or connections, contact a qualified electrician or your local utility company. Do not attempt to open the meter socket or tamper with internal components yourself.

Troubleshooting

Most issues related to a meter socket are typically handled by the utility company or a licensed electrician. Do not attempt to diagnose or repair electrical issues within the meter socket yourself.

Specifications

Warranty and Support

For specific warranty information regarding your Milbank U8032-XL-KK-BLG Meter Socket, please refer to the documentation provided at the time of purchase or contact Milbank customer support directly. Warranty terms typically cover manufacturing defects under normal use conditions.

For technical support, installation inquiries, or service, please contact:

• Milbank Customer Service: Refer to the official Milbank website for current contact information.
• Qualified Electrician: For installation, maintenance, or troubleshooting beyond basic visual inspection, always consult a licensed and qualified electrician.
• Local Utility Company: For issues related to power supply, meter reading, or service connection, contact your local electricity provider.