Westinghouse 6107000 LED Indoor Flush Mount Ceiling Fixture

Product Overview

The Westinghouse 6107000 LED Indoor Flush Mount Ceiling Fixture is designed to provide efficient and stylish illumination for various indoor spaces. Featuring a clean white finish and a white opal glass globe, this fixture integrates seamlessly with diverse interior designs. Its compact size makes it ideal for smaller areas such as hallways, laundry rooms, and closets.

Key Features:

• Compact design, suitable for hallways, laundry rooms, or any small space.
• Clean white finish with a white opal hand-blown glass globe.
• Integrated 8-watt LED provides 800 lumens, equivalent to a 60-watt incandescent bulb.
• Dimmable when used with a compatible dimming switch.
• Dimensions: Height 7-1/4 inches, Diameter 5-13/16 inches.
• ETL/CETL Listed for safety.

Important Safety Information

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause permanent damage. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

• WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
• WARNING: Risk of fire. Use only bulbs of the specified type and wattage. This fixture uses an integrated LED and does not require bulb replacement.
• WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
• Do not install this fixture in wet or damp locations. It is designed for indoor use only.
• Ensure all electrical connections are secure and comply with local codes and ordinances.

Installation and Setup

This fixture is designed for easy installation. For detailed step-by-step instructions, please refer to the official Installation Manual PDF available for download from the product's online listing or by clicking here.

Tools Required:

• Phillips head screwdriver
• Flathead screwdriver
• Wire strippers
• Electrical tape (optional)
• Safety glasses

General Installation Steps:

1. Turn off power: Locate the circuit breaker controlling the light fixture and turn it off. Verify power is off using a voltage tester.
2. Prepare mounting: Attach the mounting bracket to the electrical junction box in the ceiling. Ensure the bracket is securely fastened and oriented correctly for the fixture. Some users have noted that the mounting plate may require adjustment or specific orientation to align with existing ceiling boxes.
3. Make electrical connections: Connect the fixture's wires to the corresponding house wires (black to black, white to white, ground to ground) using wire nuts. Secure connections with electrical tape if desired.
4. Mount the fixture: Carefully push the fixture base up to the ceiling, aligning the mounting screws on the bracket with the holes in the fixture base. Secure the fixture with the provided decorative nuts or screws.
5. Install the glass globe: Gently attach the white opal glass globe to the fixture base, typically by twisting or securing with small screws. Do not overtighten.
6. Restore power: Turn the power back on at the circuit breaker.

Operation

The Westinghouse 6107000 LED Flush Mount Ceiling Fixture is designed for simple operation once installed.

• Turning On/Off: The fixture is controlled by a standard wall switch connected to the electrical circuit. Flip the switch to the 'ON' position to illuminate the fixture and 'OFF' to turn it off.
• Dimming Functionality: This fixture features a dimmable LED. To utilize the dimming capability, it must be connected to a compatible dimming switch (sold separately). Consult the dimmer switch manufacturer's instructions for proper installation and operation.

Care and Maintenance

Proper care and maintenance will ensure the longevity and optimal performance of your Westinghouse ceiling fixture.

• Cleaning: To clean the fixture, ensure the power is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe down the metal finish and glass globe. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Integrated LED: This fixture uses an integrated LED light source, which is designed for long-term use and does not require bulb replacement. If the LED light source fails, the entire fixture may need to be replaced.
• Regular Inspection: Periodically check the fixture for any loose connections or signs of wear. If any issues are observed, turn off the power and consult a qualified electrician.

Troubleshooting

If you encounter issues with your ceiling fixture, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact a qualified electrician or Westinghouse customer support for further assistance.

Product Specifications

Warranty and Support

Westinghouse stands behind the quality of its products.

• Warranty: This product comes with a five-year limited warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
• Customer Support: For technical assistance, replacement parts, or warranty inquiries, please visit the official Westinghouse website or contact their customer service department. You can also visit the Westinghouse Store on Amazon for more information: Westinghouse Store.