Lucande 'Loya' Modern LED Wall Light User Manual

1. Introduction

Thank you for choosing the Lucande 'Loya' Modern LED Wall Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

The Lucande 'Loya' is a contemporary LED wall light designed for both indoor and outdoor use, featuring a durable aluminum construction and an integrated LED light source. Its sleek design and energy-efficient technology make it an ideal choice for illuminating various spaces.

2. Safety Instructions

• Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the main power supply is disconnected before installation, maintenance, or cleaning.
• Voltage: This fixture operates on 230 Volts. Verify your power supply matches this requirement.
• Protection Class I: This product requires a protective earth connection.
• IP54 Rating: The fixture is protected against dust ingress and splashing water from any direction. While suitable for outdoor use, avoid direct high-pressure water jets.
• Integrated LED: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
• Handling: Handle the product with care to avoid damage. Do not drop or subject it to strong impacts.
• Heat: The light fixture may become warm during operation. Do not touch the light source directly when it is on.

3. Package Contents

Please check the package for the following items:

• Lucande 'Loya' LED Wall Light fixture (with integrated LED)
• Mounting hardware (screws, wall plugs) - (Assumed, typical for wall lights)
• Instruction Manual (this document)

Figure 3.1: Disassembled view of the light fixture, illustrating its main components including the outer casing, internal electrical housing, and mounting plate.

4. Setup and Installation

Important: Ensure power is OFF at the circuit breaker before beginning installation.

1. Choose Location: Select a suitable wall location for mounting. Consider the light distribution and aesthetic.
2. Mark Drilling Points: Use the fixture's mounting plate as a template to mark the drilling points on the wall.
3. Drill Holes: Drill holes at the marked points and insert appropriate wall plugs (if necessary for your wall type).
4. Wire Connection: Carefully connect the electrical wires from your power supply to the terminals on the back of the fixture. Ensure correct polarity (Live, Neutral, Earth). This fixture requires an earth connection (Protection Class I).
5. Mount Fixture: Secure the fixture to the wall using the provided screws. Ensure it is firmly attached.
6. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.

Figure 4.1: Product dimensions for installation planning.

Figure 4.2: Rear view of the fixture, showing electrical connection points and mounting hardware attachment areas.

5. Operating Instructions

The Lucande 'Loya' LED Wall Light is designed for simple operation. Once properly installed and connected to the main power supply, the light can be switched on and off using a standard wall switch connected to the circuit.

Figure 5.1: The 'Loya' light installed and illuminated on an outdoor staircase.

Figure 5.2: Multiple 'Loya' lights enhancing outdoor ambiance.

6. Maintenance

The Lucande 'Loya' LED Wall Light requires minimal maintenance.

• Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
• Inspection: Periodically inspect the fixture for any signs of damage or wear, especially if installed outdoors. Ensure all connections remain secure.
• LED Longevity: The integrated LED is designed for long-term use and does not require replacement under normal operating conditions.

7. Troubleshooting

8. Specifications

Figure 8.1: Energy Efficiency Label. For more details, scan the QR code or visit eprel.ec.europa.eu/qr/743209.

9. Warranty and Support

Lucande products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official Lucande website. Information regarding spare parts availability is not explicitly provided for this model.

For technical support or inquiries, please contact your retailer or the manufacturer directly. Ensure you have your model number (9969039) and proof of purchase ready.