1. Product Overview
The Portier Exclusive Keratin Treatment System is designed to repair, protect, and smooth hair, reducing frizz and improving manageability. This system includes an Intensive Clean Shampoo and a Beauty Effect Smoothing Keratin Treatment, formulated to provide deep hydration and reconstruct the hair's capillary structure.
Enriched with vitamins A, D, E, and F, along with proteins, arginine, wheat germ, honeycomb, and aloe vera, this treatment aims to restore softness, vibrance, and control to all hair types, including dry, damaged, or color-treated hair. It is compatible with other chemical treatments and is formulated without formaldehyde or parabens.
Image: The Portier Exclusive Keratin Treatment System, featuring the Intensive Clean Shampoo (blue bottle) and the Beauty Effect Smoothing Treatment (red bottle).
2. Safety Information and Precautions
Before beginning the treatment, please read all instructions carefully. This product is intended for professional use or by individuals with experience in Brazilian keratin treatments. Proper ventilation is essential during application due to strong fumes that may cause eye irritation or discomfort to the nose and throat.
- Ventilation: Ensure the application area is well-ventilated. Consider using a fan or applying in an open space to minimize fume exposure.
- Eye Protection: Avoid direct contact with eyes. If contact occurs, rinse immediately with plenty of water.
- Skin Contact: Wear gloves during application. Avoid direct contact with the scalp to prevent irritation. If irritation persists, discontinue use.
- Strand Test: It is highly recommended to perform a strand test on a small, inconspicuous section of hair before full application to assess compatibility and results, especially for chemically damaged or color-treated hair.
- Color-Treated Hair: This treatment may cause some fading in colored hair. Perform a strand test to observe potential color changes.
- Children: Keep out of reach of children.
Image: A woman receiving a hair wash, emphasizing the importance of proper preparation and care during the treatment process.
3. What's Included
The Portier Exclusive Keratin Treatment System typically includes the following components, each in a 1-liter (33.8 fl. oz.) bottle:
- Portier Exclusive Intensive Clean Shampoo (Blue Bottle): A deep-cleansing shampoo designed to eliminate oils and unclog pores, preparing the hair cuticles for the treatment.
- Portier Exclusive Beauty Effect Smoothing Treatment (Red Bottle): The keratin treatment formula that helps to realign the hair's capillary surface, reduce frizz, and provide smoothing effects.
Image: The Portier Exclusive Keratin Treatment System kit, showcasing the shampoo and treatment bottles within their packaging.
4. Application Instructions
Follow these steps carefully for optimal results. Ensure you have all necessary tools, including gloves, a fine-tooth comb, a blow dryer, and a flat iron capable of reaching 450°F (232°C) or higher.
- Step 1: Wash Hair with Intensive Clean Shampoo
Apply the Portier Exclusive Intensive Clean Shampoo to wet hair. Lather thoroughly and rinse. Repeat this step if necessary to ensure hair is completely clean and free of residues. Do not apply conditioner after shampooing.
- Step 2: Dry Hair
Gently towel-dry hair to remove excess water. Then, blow-dry your hair until it is approximately 80% dry.
- Step 3: Apply Keratin Treatment
Wearing gloves, divide hair into small, manageable sections. Apply the Portier Exclusive Beauty Effect Smoothing Treatment evenly to each section, starting about 0.5 inches (1.25 cm) from the scalp and working down to the ends. Use a fine-tooth comb to distribute the product and remove any excess. Ensure hair is saturated but not dripping.
- Step 4: Processing Time
Allow the treatment to process for the recommended time, typically 10 minutes. Do not exceed the recommended processing time, as this will not enhance the straightening effect.
- Step 5: Blow-Dry Hair Completely
After the processing time, blow-dry your hair 100% dry. This step is crucial and should be done in a well-ventilated area due to potential fumes. You may consider wearing a face mask.
- Step 6: Flat Iron Hair
Divide the dry hair into very thin sections. Using a flat iron heated to 450°F (232°C) or higher, pass over each thin section multiple times (e.g., 7-10 times) to activate the smoothing ingredients and seal the cuticles. The number of passes may vary depending on hair type and desired straightness.
- Step 7: Rinse (Optional, but Recommended)
After flat ironing, you may rinse the hair immediately with water to remove any residue. Some users prefer to wait a short period before rinsing. After rinsing, apply a small amount of the Beauty Effect Smoothing Conditioner, leave on for a few minutes, then rinse thoroughly.
- Step 8: Final Blow-Dry (Post-Rinse)
After the first wash and rinse, it is important to blow-dry your hair (or apply heat) to help the chemicals settle in and achieve a better finish.
Image: A woman showcasing her long, smooth, and shiny dark hair, illustrating the potential results after applying the Portier Exclusive Keratin Treatment.
5. Maintenance and Aftercare
To prolong the effects of your Portier Exclusive Keratin Treatment and maintain healthy hair, consider the following:
- Gentle Hair Care: Use sulfate-free shampoos and conditioners specifically designed for keratin-treated hair.
- Hair Masks: Incorporate a moisturizing or restoring hair mask into your routine regularly to provide extra nourishment without harsh chemicals.
- Heat Styling: While the treatment reduces the need for extensive heat styling, when using heat, apply a heat protectant.
- Avoid Harsh Chemicals: Minimize exposure to chlorine and saltwater, which can strip the treatment from your hair.
Image: A visual representation of hair structure, illustrating the smoothing and repair benefits of the keratin treatment.
6. Troubleshooting
If you encounter any issues during or after the treatment, consider the following:
- Strong Fumes/Irritation: Ensure adequate ventilation. If fumes are too strong, take breaks or move to a more open area. If irritation persists, consult a medical professional.
- Hair Not Straight Enough: Ensure the flat iron reached a high enough temperature (450°F/232°C or higher) and that you passed over very thin sections of hair multiple times. Insufficient heat or thick sections can reduce effectiveness.
- Hair Feels Heavy/Greasy: Ensure all excess product is combed out before blow-drying and that hair is thoroughly rinsed after flat ironing. The product should wash away cleanly without leaving residue.
- Color Fading: As noted in safety information, some color fading can occur. A strand test is recommended to anticipate this.
- Dandruff/Scalp Irritation: Avoid applying the treatment directly to the scalp. If product touches the scalp, it can cause irritation.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Portier |
| Product Name | Exclusive Keratin Treatment | Progressive Brush | Smoothing System |
| Item Form | Cream |
| Product Benefits | Hydrating, Smoothing, Frizz Control, Repair |
| Hair Type | Dry (suitable for all hair types and colors) |
| Item Weight | 34 Ounces (per bottle) |
| Product Dimensions | 3.62 x 10.16 x 12.48 inches (overall package) |
| UPC | 783764502736 |
8. Warranty and Support
Warranty information for the Portier Exclusive Keratin Treatment System is not provided in the available product data. For specific warranty details or product support, please contact the manufacturer directly:
Manufacturer: Portier
Refer to the product packaging or the official Portier website for contact information and further assistance.
