1. Introduction
The LiCB CR1225 is a high-performance 3V lithium button cell battery designed for various small electronic devices. This manual provides essential information for safe and effective use, installation, and maintenance of your CR1225 batteries.
Image 1: LiCB CR1225 3V Lithium Batteries in blister packaging, showing a pack of 10 batteries and a single battery with its specifications.
2. Safety Information
Please read and understand all safety warnings before using these batteries.
- Keep away from children: Button cell batteries can be swallowed and cause serious injury or death. Store batteries out of reach of children.
- Do not recharge: These batteries are not rechargeable. Attempting to recharge them may lead to leakage, fire, or explosion.
- Do not dispose of in fire: Batteries may explode or leak if disposed of in fire.
- Do not disassemble or short-circuit: This can cause leakage, overheating, or explosion.
- Proper polarity: Ensure correct polarity (+ and -) when installing batteries. Incorrect installation can damage the device.
- Avoid contact with skin and eyes: In case of leakage, avoid contact with skin and eyes. If contact occurs, rinse immediately with water and seek medical attention.
Image 2: LiCB CR1225 battery highlighting safety features such as stable voltage, 3-year shelf life, strong power, mercury-free composition, and leak-proof design.
3. Specifications
| Feature | Detail |
|---|---|
| Brand | LiCB |
| Model Number | LWUS-1225-10 (CR1225) |
| Battery Type | Lithium Button Cell |
| Voltage | 3V |
| Capacity | 50 Milliamp Hours (mAh) |
| Dimensions | 12mm x 2.5mm (0.47 x 0.47 x 0.1 inches) |
| Item Weight | 0.634 ounces (for 10 batteries) |
| Chemical System | Lithium Manganese Dioxide |
| Shelf Life | 3 Years |
| Certifications | CE, ROHS |
Image 3: A LiCB CR1225 battery alongside a table detailing its specifications, including brand, name, type, size, voltage, weight, chemical system, lifetime, and capacity.
4. Setup and Installation
Follow these general steps to install the CR1225 battery in your compatible device. Always refer to your device's specific instruction manual for detailed battery replacement procedures.
- Identify Battery Compartment: Locate the battery compartment on your device. This is often secured with a small screw or a latch.
- Open Compartment: Carefully open the battery compartment using the appropriate tool (e.g., a small screwdriver).
- Remove Old Battery (if applicable): If replacing an old battery, gently remove it. Note its orientation (positive (+) and negative (-) terminals).
- Insert New Battery: Insert the new LiCB CR1225 battery, ensuring the positive (+) side faces the correct direction as indicated in your device's compartment. The positive side is typically marked with a "+" symbol.
- Close Compartment: Securely close the battery compartment.
- Test Device: Power on your device to confirm proper battery installation and functionality.
5. Operating Guidelines
The LiCB CR1225 battery provides a stable 3V power supply for compatible electronic devices. Once installed correctly, the battery will power your device until its charge is depleted.
- These batteries are suitable for devices such as remote controls, watches, calculators, electronic notebooks, thermometers, and mobile games.
- The battery is designed for long-lasting performance with a full 3V charge and a 3-year shelf life.
- Performance may vary depending on the power requirements of the device and usage patterns.
Image 4: A visual comparison demonstrating the voltage retention of LiCB batteries versus ordinary batteries over one and two years of storage, indicating superior longevity for LiCB products.
6. Maintenance and Storage
- Storage: Store unused batteries in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
- Disposal: Dispose of used batteries according to local regulations. Do not throw them in household waste. Many retailers and recycling centers offer battery recycling programs.
- Cleaning: If battery terminals appear dirty, gently wipe them with a clean, dry cloth before installation.
- Leakage: If a battery shows signs of leakage, handle it with gloves and dispose of it immediately. Clean the device's battery compartment thoroughly before installing a new battery.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on | Incorrect battery installation, depleted battery, faulty device. | Check battery polarity. Replace with a new battery. Test the device with another known-good battery. |
| Short battery life | High power consumption of device, old battery, extreme temperatures. | Ensure battery is fresh. Avoid using device in extreme temperatures. Consider device's power requirements. |
| Battery leakage | Over-discharge, physical damage, improper storage. | Dispose of battery safely. Clean device. Ensure proper storage and usage. |
8. Warranty and Support
LiCB CR1225 batteries come with an 18-month warranty. For any questions, concerns, or support needs, please contact LiCB customer service.
You can find more information and contact details on the official LiCB website: www.licb-battery.com.