1. Introduction
The Bauer Professional 38680 Aqua Care Facial Steamer and Nasal Inhaler is designed to provide steam for facial skin care and nasal inhalation. This device can assist in improving skin hydration and offering relief from nasal congestion. Please read this manual thoroughly before initial use to ensure safe and effective operation.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in injury or damage to the device.
- Do not use on irritated or broken skin.
- Avoid contact with eyes and mucous membranes.
- Do not use on children under 12 years of age without supervision.
- Do not leave the device running unattended.
- Allow the device to cool down completely before storing or cleaning.
- Ensure the device is placed on a stable, flat, heat-resistant surface during operation.
- Do not overfill the water reservoir.
- Use only distilled or purified water to prevent mineral buildup.
- Keep out of reach of children and pets.
- Unplug the device from the power outlet when not in use and before cleaning.
3. Package Contents
Verify that all items are present in the package:
- Bauer Professional 38680 Main Unit
- Facial Steamer Attachment
- Nasal Inhaler Attachment
- Essential Oil Tray
- Water Measuring Cup
- User Manual (this document)
4. Product Components
Familiarize yourself with the parts of your Bauer Professional 38680 device.
Image 4.1: Overview of the Bauer Professional 38680 Aqua Care device, showing the main unit, facial steamer attachment, nasal inhaler attachment, and essential oil tray.
- Main Unit: Contains the heating element, water reservoir, and control dial.
- Facial Steamer Attachment: Large cone-shaped attachment for full-face steaming.
- Nasal Inhaler Attachment: Smaller, contoured attachment for targeted nasal and mouth inhalation.
- Essential Oil Tray: A small tray located on the nasal inhaler attachment for adding essential oils.
- Control Dial: Used to turn the device on/off and select steam intensity (if applicable).
- Water Measuring Cup: For accurate filling of the water reservoir.
5. Setup
Follow these steps to prepare your device for use:
- Placement: Place the main unit on a firm, level, heat-resistant surface.
- Fill Water Reservoir: Using the provided measuring cup, fill the water reservoir with up to 50ml of distilled or purified water. Do not exceed the maximum fill line.
- Attach Cone: Select either the facial steamer attachment or the nasal inhaler attachment. Align the attachment with the main unit and twist gently to secure it in place.
- Add Essential Oils (Optional): If using essential oils, add a few drops to the essential oil tray located on the attachment. Do not add essential oils directly into the water reservoir.
- Connect Power: Plug the power cord into a suitable electrical outlet (220V AC).
6. Operating Instructions
6.1. Facial Steaming
Image 6.1: A user demonstrating the application of the facial steamer attachment for skin cleansing.
- Ensure the facial steamer attachment is securely in place and the water reservoir is filled.
- Turn the control dial to the desired setting (e.g., '1' or '2' for steam intensity). The indicator light will illuminate.
- Allow a few minutes for the water to heat up and steam to begin producing.
- Position your face comfortably over the facial steamer attachment, maintaining a safe distance to avoid burns. Do not rest your face directly on the attachment.
- Close your eyes and relax. A typical session lasts 5-10 minutes, or until the water runs out. The device will automatically shut off when the water level is too low.
- After use, turn the control dial to '0' and unplug the device.
6.2. Nasal Inhalation
Image 6.2: A user demonstrating the application of the nasal inhaler attachment for congestion relief.
- Ensure the nasal inhaler attachment is securely in place and the water reservoir is filled.
- If using essential oils, add them to the essential oil tray on the nasal attachment.
- Turn the control dial to the desired setting. The indicator light will illuminate.
- Allow a few minutes for steam to begin producing.
- Position your nose and mouth comfortably over the nasal inhaler attachment, maintaining a safe distance.
- Breathe normally, inhaling the steam. A typical session lasts 5-10 minutes, or until the water runs out. The device will automatically shut off when the water level is too low.
- After use, turn the control dial to '0' and unplug the device.
7. Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your device.
- Unplug and Cool: Always unplug the device and allow it to cool completely before cleaning.
- Empty Water: Carefully remove the attachment and empty any remaining water from the reservoir.
- Clean Reservoir: Wipe the inside of the water reservoir with a soft, damp cloth. For mineral buildup, a solution of equal parts white vinegar and water can be used. Let it sit for 15-20 minutes, then rinse thoroughly with clean water.
- Clean Attachments: Wash the facial steamer and nasal inhaler attachments, as well as the essential oil tray, with warm, soapy water. Rinse thoroughly and allow them to air dry completely before reattaching or storing.
- Exterior Cleaning: Wipe the exterior of the main unit with a soft, damp cloth. Do not immerse the main unit in water.
- Storage: Store the device in a cool, dry place, away from direct sunlight and moisture.
8. Troubleshooting
If you encounter issues with your device, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No steam produced | Device not plugged in; Water reservoir empty; Attachment not properly secured; Mineral buildup. | Ensure power cord is securely plugged in; Fill water reservoir; Re-attach cone securely; Clean the device as per maintenance instructions. |
| Weak steam production | Insufficient water; Mineral buildup; Incorrect setting. | Ensure water is at the correct level; Clean the device; Adjust the control dial to a higher setting. |
| Device leaks water | Overfilled reservoir; Attachment not properly secured; Damaged seal. | Do not overfill the reservoir; Ensure attachment is securely twisted into place; If leaking persists, discontinue use and contact customer support. |
| Device does not turn on | No power; Faulty power cord/outlet. | Check power connection; Try a different outlet; If still not working, contact customer support. |
9. Specifications
- Model Number: 38680
- Brand: Bauer Professional
- Material: Plastic
- Color: Aqua
- Dimensions (L x W x H): 20 x 19.5 x 22.5 cm
- Weight: 770 grams
- Power Source: Corded Electric
- Voltage: 220 Volts (AC)
- Capacity: 50 Milliliters (water reservoir)
10. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Bauer Professional customer service. Keep your proof of purchase for any warranty claims.