BoNew 5W Headband Optic with Head Working Distance DY-106 3.5X-R User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective use of your BoNew 5W Headband Optic with Head Working Distance DY-106 3.5X-R. Please read this manual thoroughly before operation and retain it for future reference. This device is designed to provide magnified vision and illumination for various applications requiring precision.

Package Contents

Upon opening the package, please verify that all components listed below are present and undamaged:

• 1 x Loupe
• 1 x Head Lamp
• 1 x Headband
• 1 x Lens cover
• 1 x Fringe grip
• 1 x Instruction manual (this document)

Setup

Follow these steps to set up your BoNew Headband Optic:

1. 1. Attach the Loupe and Head Lamp to the Headband:

   Carefully align the loupe and head lamp assembly with the mounting points on the headband. Secure them firmly to ensure stability during use. The headband is designed for comfortable and secure fit.

   

   Figure 1: Assembled BoNew Headband Optic.

2. 2. Adjust the Headband for Fit:

   Place the headband on your head. Use the adjustment knob at the top of the headband to tighten or loosen it until it fits snugly and comfortably without causing pressure points. The headband dimensions are adjustable from 3.9-5.1 inches in height and 6.5-9.3 inches in width.

   

   Figure 2: Headband with indicated adjustable dimensions.

3. 3. Position the Loupe and Head Lamp:

   Adjust the angle and height of the loupe and head lamp assembly to align with your eyes and the area you intend to illuminate and magnify. Ensure the loupe is at a comfortable working distance (280-380mm) for optimal focus.

   

   Figure 3: Proper positioning of the headband optic on a head.

Operating Instructions

To operate your BoNew Headband Optic, follow these guidelines:

1. 1. Power On the Head Lamp:

   Locate the power switch for the head lamp, typically on the side of the headband or battery pack. Turn it on. The lamp provides 5W of power with an intensity of 65000 lux.

   

   Figure 4: Head lamp illuminated.

2. 2. Adjust Brightness and Spot Size:

   The head lamp features adjustable brightness and spot size. Use the designated controls (knobs or sliders) to fine-tune the illumination to your preference and the specific requirements of your task. The spot size is adjustable from 1 to 9mm at 420mm working distance.

3. 3. Focus the Loupe:

   While looking through the loupe, adjust the focus mechanism until the object you are viewing appears clear and sharp. The magnification is 3.5x, and the field of view is 60mm.

   

   Figure 5: Close-up view of the 3.5X loupe optics.

4. 4. Battery Charging:

   The device operates on a rechargeable battery. When the battery indicator shows low power, connect the charger to the device and a standard power outlet (100-240VAC, 50-60Hz). A full charge takes approximately 4 hours and provides a working time of at least 6 hours.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your BoNew Headband Optic:

• Cleaning Lenses: Use a soft, lint-free cloth specifically designed for optical lenses to clean the loupe lenses. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth, not directly to the lens. Avoid abrasive materials or harsh chemicals.
• Cleaning Headband: The fur headband can be gently wiped with a damp cloth. Ensure it is completely dry before storage.
• Storage: Store the device in its original box or a protective case when not in use to prevent dust accumulation and physical damage. Keep it in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge it regularly, even if not in constant use. If storing for an extended period, charge the battery to about 50% capacity.

Troubleshooting

If you encounter issues with your BoNew Headband Optic, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact customer support.

Specifications

Detailed technical specifications for the BoNew 5W Headband Optic with Head Working Distance DY-106 3.5X-R:

• Magnification: 3.5x
• Working Distance: 280-380mm
• Field of View: 60mm
• Lens Material: Plastic and Optical Glass
• Frame: Headband Mount (Fur headband)
• Optical System: Optical Compound
• Lamp Power: 5W
• Lamp Intensity: 65000 lux
• Lamp Lifespan: 20000 hours
• Spot Size (at 420mm): 1 to 9mm (adjustable)
• Working Time: ≥ 6 hours
• Charging Time: 4 hours
• Input: 100-240VAC, 50-60Hz
• Brightness: Adjustable
• Color: White
• Item Model Number: 1178
• Package Dimensions: 10.28 x 9.17 x 6.38 inches
• Weight: 1.77 Pounds

Warranty Information

Specific warranty details for the BoNew 5W Headband Optic are not provided in this manual. Please refer to the product packaging or contact the manufacturer directly for warranty terms and conditions.

Customer Support

For technical assistance, replacement parts, or any other inquiries regarding your BoNew Headband Optic, please contact your retailer or the manufacturer's customer service department. Contact information is typically available on the product packaging or the manufacturer's official website.