1. Introduction
Thank you for choosing the RIGID Q-SERIES PRO FLOOD DIFFUSED light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting product. Please read this manual thoroughly before installation and keep it for future reference.
The RIGID Q-SERIES PRO FLOOD DIFFUSED light is designed for robust performance, featuring a diffused beam pattern and a durable, waterproof construction suitable for various applications.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or property.
- Always disconnect power before installing or servicing the light.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Do not look directly into the light when it is operating, as it can cause eye damage.
- Install the light in a location that does not obstruct the driver's view or violate local regulations.
- Use appropriate personal protective equipment (PPE) during installation.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x RIGID Q-SERIES PRO FLOOD DIFFUSED Light (Model 244513)
- Mounting Bracket
- Mounting Hardware (bolts, washers, nuts)
- Wiring Harness (may be sold separately or included depending on kit)
Image 1: RIGID Q-SERIES PRO FLOOD DIFFUSED Light. This image shows the square-shaped LED light with a black housing and a silver U-shaped mounting bracket attached to its sides. The front face features numerous small LED bulbs behind a clear, diffused lens. The RIGID logo is visible at the top of the light housing.
4. Setup and Installation
This section outlines general steps for installing your RIGID Q-SERIES PRO FLOOD DIFFUSED light. Specific vehicle or application requirements may vary. Professional installation is recommended if you are unfamiliar with automotive electrical systems.
- Choose Mounting Location: Select a secure and appropriate location for the light, ensuring it does not obstruct vision or airflow.
- Mount the Bracket: Secure the U-shaped mounting bracket to the chosen surface using the provided hardware. Ensure the bracket is firmly attached.
- Attach the Light: Position the light fixture within the mounting bracket and secure it using the pivot bolts. Do not overtighten, as adjustment may be needed.
- Wiring:
- Connect the positive wire from the light to a fused 12V power source (e.g., battery, auxiliary switch).
- Connect the negative wire from the light to a suitable ground point on the vehicle chassis.
- It is recommended to use a relay and switch for proper circuit protection and control.
- Ensure all connections are waterproof and protected from abrasion.
- Aim the Light: Once installed and wired, power on the light and adjust its angle to achieve the desired flood illumination pattern. Tighten the pivot bolts securely after aiming.
5. Operating Instructions
The RIGID Q-SERIES PRO FLOOD DIFFUSED light is designed for straightforward operation.
- Power On/Off: Activate the light using the connected switch in your vehicle or application.
- Beam Pattern: This model features a diffused beam, providing a wide spread of light suitable for area illumination rather than long-distance spot lighting.
- Waterproof Design: The light is waterproof, allowing for reliable operation in various weather conditions.
6. Maintenance
Minimal maintenance is required for your RIGID Q-SERIES PRO FLOOD DIFFUSED light to ensure optimal performance and longevity.
- Cleaning: Periodically clean the lens with a soft cloth and mild soap and water to remove dirt, mud, or debris that may obstruct light output. Avoid abrasive cleaners.
- Inspection: Regularly check all mounting hardware and electrical connections for tightness and corrosion. Re-tighten as necessary.
- Wiring: Inspect the wiring for any signs of wear, fraying, or damage. Repair or replace damaged wiring immediately.
7. Troubleshooting
If you encounter issues with your light, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose connection, blown fuse, faulty switch. | Check power source, inspect all wiring connections, check fuse, test switch. |
| Light flickers or is dim. | Poor electrical connection, insufficient voltage, damaged wiring. | Verify connections are tight and clean, check vehicle's electrical system, inspect wiring for damage. |
| Moisture inside the lens. | Seal compromise, extreme temperature changes. | Contact customer support if persistent. Small amounts of condensation may dissipate naturally. |
If these steps do not resolve the issue, please contact RIGID customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model | Q-SERIES PRO FLOOD DIFFUSED (244513) |
| Brand | RIGID |
| Light Shape | Cube |
| Beam Type | Diffused |
| Beam Color | White |
| Housing Color | Black |
| Item Dimensions (L x W x H) | 8 x 4 x 13 inches |
| Item Weight | 5 Pounds |
| Water Resistance Level | Waterproof |
| Included Components | Q-SERIES PRO FLOOD DIFFUSED light |
| UPC | 849774024962 |
| Manufacturer Part Number | 244513 |
9. Warranty and Support
For warranty information, please refer to the documentation included with your purchase or visit the official RIGID website. RIGID stands behind its products and offers support for manufacturing defects.
If you require technical assistance, have questions about installation, or need to report a product issue, please contact RIGID customer support through their official channels. Have your model number (244513) and purchase details ready when contacting support.
You can typically find contact information on the manufacturer's website: www.rigidindustries.com
