Poraxy Dual Head Car Fan (Model HX-T205L) Instruction Manual

Important Safety Information

• Ensure the fan is securely mounted to prevent it from dislodging during vehicle movement.
• Keep fingers, hair, and loose clothing away from the fan blades during operation.
• Do not obstruct the airflow of the fan.
• Only use with a 12V DC power source (cigarette lighter socket).
• Unplug the fan when not in use or when leaving the vehicle for extended periods.
• Keep the power cord away from hot surfaces and sharp edges.

Product Overview

The Poraxy Dual Head Car Fan is designed to provide efficient cooling and improved air circulation for rear-seat passengers in various vehicles. It features two independently adjustable fan heads, stepless speed control, and a convenient headrest mounting system.

Image: The Poraxy Dual Head Car Fan demonstrating its 360-degree vertical and 180-degree horizontal adjustment capabilities for optimal airflow direction.

Package Contents

Verify that all items are present in the package:

• Dual Head Car Fan Unit
• Headrest Mounting Bracket
• 12V Cigarette Lighter Power Cord with Stepless Speed Controller

Image: A visual representation of the fan unit, headrest mounting bracket, and power cord with speed controller, as typically included in the product package.

Setup and Installation

Follow these steps to install your Poraxy Dual Head Car Fan:

1. Attach the Bracket: Secure the headrest mounting bracket to the metal poles of your vehicle's headrest. Adjust the clamps to fit snugly and tighten the knobs to ensure stability.
2. Mount the Fan: Align the fan unit with the ball joint on the mounting bracket and snap it into place. Ensure it is firmly attached.
3. Adjust Fan Position: Pivot the fan heads to your desired direction. The fans support 360-degree rotation for optimal airflow.
4. Connect Power: Plug the 12V cigarette lighter power cord into your vehicle's cigarette lighter socket. Route the cable safely to avoid obstruction or damage.

Image: A four-step visual guide illustrating how to fix the bracket to the seat, lock the screw, fix the fan on the bracket, and insert the cigarette lighter into the socket.

Operating Instructions

Once installed, operating your fan is simple:

• Power On/Off: Use the slider switch on the in-line controller to turn the fan on or off.
• Adjust Speed: Rotate the stepless speed adjustment dial on the controller to increase or decrease the fan's airflow. This allows for precise control from a gentle breeze to a strong wind.
• Direct Airflow: Manually adjust each fan head 360 degrees vertically and 180 degrees horizontally to direct air exactly where needed for individual passenger comfort.

Image: A close-up of the stepless speed controller, showing the 'OFF' to 'MAX' dial and an indicator light for easy visibility in low light conditions.

Maintenance

To ensure optimal performance and longevity of your fan:

• Cleaning: The front grill of each fan head is detachable for easy cleaning. Gently remove the grill and wipe the blades with a soft, damp cloth. Ensure the fan is completely dry before reattaching the grill and operating.
• General Care: Keep the fan free from dust and debris. Avoid using harsh chemicals or abrasive materials for cleaning.

Image: A visual demonstrating the detachable front grill of the fan, highlighting its ease of removal for cleaning purposes.

Troubleshooting

If you encounter issues with your fan, refer to the following common problems and solutions:

• Fan Not Turning On:
  • Check if the 12V cigarette lighter plug is fully inserted into the socket.
  • Ensure the vehicle's ignition is on (if required for the 12V socket).
  • Verify the on/off switch on the controller is in the 'ON' position.
  • Inspect the power cord for any visible damage.
• Weak Airflow:
  • Adjust the stepless speed dial to a higher setting.
  • Ensure the fan grills are clean and free from dust or obstructions.
  • Confirm the fan heads are directed optimally towards the desired area.
• Fan Not Staying in Position:
  • Tighten the knobs on the headrest mounting bracket.
  • Ensure the fan unit is securely snapped onto the ball joint and the tightening ring is firm.

Specifications

Warranty and Support

For warranty information or technical support, please contact Poraxy customer service through the retailer where the product was purchased or visit the official Poraxy website. Keep your purchase receipt as proof of purchase.