GOLDEN HOUR Luxury Stainless Steel Analog Digital Watch User Manual

Introduction

Welcome to the GOLDEN HOUR Luxury Stainless Steel Analog Digital Watch user manual. This guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new timepiece. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch.

The GOLDEN HOUR watch combines classic analog display with modern digital functionalities, offering versatility and precision for various activities, including outdoor sports. Its robust stainless steel construction ensures durability.

Image: Front view of the GOLDEN HOUR Luxury Stainless Steel Analog Digital Watch in black, showcasing its robust design and dual display.

Product Features

• Multifunctionality: Features include Chronograph, Alarm, Tachometer, Day & Date display, Backlight, LED Digital Display, Weeks display, and Dual Time capability.
• Movement: Equipped with a Japanese Miyota Quartz Movement for the analog display and a Digital Display for precise timekeeping.
• Water Resistance: Rated 3ATM/98FT (30 meters), suitable for brief immersion, splashes, and rain. Not recommended for swimming or diving.
• Durable Construction: Features a round, heavy, and durable black stainless steel band, case, and fold-over clasp.
• Crystal: Protected by a scratch-proof mineral crystal.

Watch Components Identification

Familiarize yourself with the various parts and controls of your GOLDEN HOUR watch:

Image: Detailed diagram illustrating the watch's various functions and their corresponding display areas, including week, date, 12/24 hour format, seconds, alarm, and stopwatch signal.

• Crown (Right Side): Used for setting analog time.
• Push Buttons (Left & Right Sides): Control digital functions such as mode switching, setting, and chronograph operations.
• Analog Display: Traditional hour, minute, and second hands.
• Digital Display: Shows time, date, day, alarm, and chronograph readings.
• Tachymeter Bezel: Outer ring with markings for calculating speed.
• Backlight Button: Activates the LED backlight for the digital display.

Initial Setup

1. Setting Analog Time

1. Pull the crown out to the first position.
2. Rotate the crown to adjust the hour and minute hands to the correct time.
3. Push the crown back in to its normal position to start the analog movement.

2. Setting Digital Time, Date, and Day

The digital display controls are typically managed by the push buttons on the side of the watch. Specific button functions may vary slightly, but generally follow these steps:

1. Press the MODE button (usually bottom-left) repeatedly to cycle through modes: Time, Alarm, Chronograph, Dual Time.
2. When in the Time mode, press and hold the RESET button (usually bottom-right) until the seconds start flashing. This indicates setting mode.
3. Press the START button (usually top-right) to adjust the flashing value (seconds, hours, minutes, month, date, day).
4. Press the MODE button to move to the next setting parameter.
5. Once all settings are correct, press the RESET button again to exit setting mode.

3. Band Adjustment

Your watch comes with a stainless steel band that may require adjustment for a comfortable fit. It is recommended to have this done by a professional jeweler. If you choose to adjust it yourself, a link removal tool is typically required. Carefully push out the pins in the direction of the arrows on the inside of the links to remove excess links. Reinsert pins to secure the band.

Image: Technical drawing of the watch with dimensions, including band width and length, useful for band adjustment.

Operating Instructions

1. Using the Chronograph (Stopwatch)

1. Press the MODE button until "CHRONO" or "STW" appears on the digital display.
2. Press the START button to begin timing.
3. Press the START button again to pause/resume timing.
4. Press the RESET button to stop timing and reset the chronograph to zero.

2. Setting and Using the Alarm

1. Press the MODE button until "ALARM" or "AL" appears.
2. Press and hold the RESET button until the alarm time starts flashing.
3. Use the START button to adjust the hour and minute.
4. Use the MODE button to switch between hour and minute settings.
5. Press RESET to confirm and exit setting mode.
6. To activate/deactivate the alarm, press the START button while in Alarm mode (a bell icon usually indicates activation).

3. Dual Time Function

This feature allows you to display a second time zone digitally.

1. Press the MODE button until "DUAL TIME" or "DT" appears.
2. Press and hold the RESET button to enter setting mode.
3. Use the START button to adjust the hours and minutes for the second time zone.
4. Press MODE to switch between hour and minute settings.
5. Press RESET to confirm and exit setting mode.

4. Backlight Activation

To illuminate the digital display in low-light conditions, press the LIGHT button (usually top-left). The backlight will typically stay on for a few seconds.

Image: The GOLDEN HOUR watch with its green LED backlight illuminated, showing the digital time and day clearly in the dark.

Care and Maintenance

1. Cleaning Your Watch

• Wipe the watch case and band regularly with a soft, dry cloth to remove dust and fingerprints.
• For stubborn dirt, dampen the cloth slightly with water and a mild soap, then wipe clean and dry thoroughly.
• Avoid using harsh chemicals, solvents, or abrasive cleaners as they can damage the watch's finish.

2. Water Resistance Guidelines

Your GOLDEN HOUR watch is water resistant to 3ATM (30 meters / 98 feet). This rating means the watch is protected against accidental splashes, rain, and brief immersion in water. It is not designed for:

• Swimming or diving.
• Showering or bathing (hot water and steam can compromise seals).
• Operating buttons while the watch is wet or submerged.

Always ensure the crown is fully pushed in before any contact with water.

3. Battery Replacement

The watch uses two types of batteries: one for the analog movement and one for the digital display. When the analog hands stop or the digital display fades, it indicates a low battery. Battery replacement should be performed by a qualified watch technician to prevent damage to the internal components and to ensure water resistance is maintained. The watch back is designed to be opened with a specific tool.

Troubleshooting

If you encounter issues with your watch, please refer to the table below for common problems and their solutions:

If the problem persists after attempting these solutions, please contact GOLDEN HOUR customer support for further assistance.

Technical Specifications

Image: Diagram detailing the product parameters including case diameter, thickness, band width, and wearing size range.

Warranty and Support

1. Warranty Information

GOLDEN HOUR provides a 1-year after-sales service against any manufacturing defects from the date of purchase. Additionally, a 15-day charge back and replacement within 30 days are offered for eligible issues. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from accidents, misuse, unauthorized repairs, or normal wear and tear.

2. Customer Support

For any questions, concerns, or assistance with your GOLDEN HOUR watch, please contact our customer service team. You can typically find contact information on the GOLDEN HOUR store page on Amazon or through the retailer where you purchased the product. Please have your model number (TM-GH-108-B-B) and purchase details ready when contacting support.

Visit the official GOLDEN HOUR store for more information: GOLDEN HOUR Store