TX10I1-8 Terra Exterior IR Camera Instruction Manual

Introduction

The TX10I1-8 Terra Exterior IR Camera is a robust digital scanning camera designed for outdoor surveillance. It features a 10 MP sensor, 21 high-intensity infrared LEDs for night vision, and capabilities for both still photos and HD video recording. This manual provides essential information for setting up, operating, and maintaining your camera.

Package Contents

• TX10I1-8 Terra Exterior IR Camera (Quantity 2)
• Elastic Cords (for mounting)
• Note: SDHC card (up to 32 GB) and 8 AA batteries are not included and must be purchased separately.

Setup

1. Battery Installation

The camera requires 8 AA batteries for operation. Ensure the camera is powered off before installing or replacing batteries.

1. Locate the battery compartment on the camera body.
2. Open the compartment door.
3. Insert 8 AA batteries, observing the correct polarity (+/-) as indicated inside the compartment.
4. Securely close the battery compartment door.

2. SD Card Insertion

An SDHC card (up to 32 GB) is required to store photos and videos.

1. Locate the SD card slot, typically near the battery compartment or on the side.
2. Insert the SDHC card with the metal contacts facing down (or as indicated by the slot diagram) until it clicks into place.
3. To remove, gently push the card in until it springs out.

3. Mounting the Camera

Use the included elastic cords to secure the camera to a tree, pole, or other suitable structure.

• Thread the elastic cords through the mounting slots on the camera body.
• Wrap the cords around the desired mounting surface and secure them tightly.
• Ensure the camera is stable and pointed towards the desired surveillance area.
• The camera can also be wall-mounted using appropriate hardware (not included) via its mounting points.

Image: Front view of the TX10I1-8 Terra Exterior IR Camera. This image displays the camera's robust dark grey casing, featuring a central lens, an array of 21 infrared LEDs at the top for night vision, and a small display screen at the bottom. Mounting loops are visible on the sides.

Operating the Camera

Powering On/Off

Locate the power switch, usually inside the camera housing or on the side. Switch it to the "ON" position to power on the camera. Switch to "OFF" to power down.

Modes of Operation

The camera supports both still photo and HD video capture.

• Still Photo: Captures 10 MP images. The camera will automatically take photos when motion is detected within its trigger range.
• HD Video: Records 15-second HD video clips. This mode is ideal for capturing longer sequences of activity.

Refer to the camera's internal menu (accessed via the display screen and control buttons) to select your preferred operating mode and adjust settings such as delay, sensitivity, and time-lapse options.

Trigger Speed and Lighting

The camera boasts a trigger speed of less than a second, ensuring minimal delay in capturing events. The 21 high-intensity infrared LEDs provide a lighting range of up to 60 feet, enabling clear night vision capture without disturbing wildlife or alerting intruders.

Maintenance

Battery Life

With average use, the camera can achieve up to one year of battery life. To maximize battery life, consider using high-quality alkaline or lithium batteries. Monitor the battery indicator on the camera's display.

Cleaning and Storage

• Wipe the camera lens and IR LEDs periodically with a soft, clean cloth to ensure optimal image quality.
• Keep the camera free from dirt, dust, and debris.
• When storing the camera for extended periods, remove the batteries to prevent leakage.
• Store in a cool, dry place away from direct sunlight.

Troubleshooting

• Camera not powering on:

  Ensure batteries are correctly installed with proper polarity and are not depleted. Check that the power switch is in the "ON" position.

• No photos/videos being recorded:

  Verify that an SDHC card is inserted and properly formatted. Check if the card is full. Ensure the camera is in the correct operating mode (photo or video) and that motion detection settings are appropriate for the environment.

• Poor image/video quality at night:

  Ensure the IR LEDs are not obstructed and are clean. Check the distance to the subject; the effective lighting range is up to 60 feet. Low battery levels can also affect IR performance.

• Short battery life:

  Use high-quality batteries. Frequent triggers, extreme temperatures, and extensive video recording can reduce battery life. Consider adjusting trigger sensitivity or recording duration.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt as proof of purchase.

Manufacturer: Wildgame Innovations

Brand: Wgi Innovations/Ba Products